SS 375 Pt 2-6-2001 SPECIFICATION FOR Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality oftra.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 08FTM12-2008 In-situ Measurement of Stresses in Carburized Gears via Neutron Diffraction《中子衍射渗碳齿轮的现场应力测量》.pdf

AGMA 08FTM13-2008 Hydrogen and Internal Residual Stress Gear Failures - Some Failure Analyses and Case Studies《氢和内部残余应力齿轮故障.一些故障分析和案例研究》.pdf

AGMA 08FTM14-2008 Effects of Axle Deflection and Tooth Flank Modification on Hypoid Gear Stress Distribution and Contact Fatigue Life《轴偏转和齿面修形对准双曲面齿轮应力分布和啮合疲劳寿命的影响》.pdf

AGMA 08FTM15-2008 Extending the Benefits of Elemental Gear Inspection《自然力齿轮检查的有益扩大》.pdf

AGMA 08FTM16-2008 Hob Tool Life Technology Update《滚刀工具寿命技术更新》.pdf

AGMA 08FTM17-2008 Innovative Concepts for Grinding Wind Power Energy Gears《磨削风力齿轮用创新概念》.pdf

AGMA 08FTM18-2008 Gear Corrosion During the Manufacturing Process《再生产过程中的齿轮腐蚀》.pdf

AGMA 08FTM19-2008 How Are You Dealing with the Bias Error in Your Helical Gears 《您如何处理斜齿轮的偏移误差？》.pdf

AGMA 09FTM01-2009 Influence of the Residual Stresses Induced by Hard Finishing Processes on the Running Behavior of Gears《在齿轮转动时由硬齿面精加工产生的残余应力的影响》.pdf