TCVN 2013-1977 Reservoirs for hydraulic and lubricating systems Nominal volumes《液压和润滑系统的容器 标称容积》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E1999-1999(2004) Standard Test Method for Analysis of Cast Iron Using Optical Emission Spectrometry《用光辐射光谱测定法进行铸铁分析的标准试验方法》.pdf

ASTM E1999-2011 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry《使用火花原子发射光谱法分析铸铁的标准试验方法》.pdf

ASTM E1999-2018 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry.pdf

ASTM E2001-1998(2003) Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts《金属和非金属部件探伤检验用的共振超声谱法的标准指南》.pdf

ASTM E2001-2008 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts《金属和非金属部件探伤检验用的共振超声谱法的标准指南》.pdf

ASTM E2001-2013 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts《金属和非金属零件缺陷检测用共振超声谱法的标准指南》.pdf

ASTM E2002-1998(2003)e1 Standard Practice for Determining Total Image Unsharpness in Radiology《应用放射学测定整体图像不清晰度的标准操作规程》.pdf

ASTM E2002-1998(2009) Standard Practice for Determining Total Image Unsharpness in Radiology《应用放射学测定整体图像不清晰度的标准实施规程》.pdf

ASTM E2002-2015 Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy《测定射线照相术和X光透视中总图像不清晰度和基本控件分辨率的标准实施规程》.pdf