TCVN 3593-1981 Woodworking lathers Standards of accuracy《木工泡沫 精度标准》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM ISO 2206-1987 Packaging complete filled transport packages Identification of parts when testing《包装 完整填充运输包装 测试时零部件的鉴定》.pdf

ONORM ISO 2233-1987 Packaging complete filled transport packages conditioning for testing《包装 完整填充运输包装 测试调节》.pdf

ONORM ISO 2234-1987 Packaging complete filled transport packages stacking tests using static load《包装 完整填充运输包装 静载荷法堆垛试验》.pdf

ONORM ISO 2248-1988 Packaging complete filled transport packages vertical impact fest by dropping《包装 完整填充运输包装 坠落垂直冲击试验》.pdf

ONORM ISO 2271-1987 Surface active agents detergents determination of anionic-active matter (direct two-phase titration procedure)《表面活性剂 去污剂 阴离子活性物质的测定（直接双相滴定法程序）》.pdf

ONORM ISO 228 Teil 1-1982 Pipe threads where pressure-tight joints are not made on the threads Designation dimensions and tolerances《非螺纹密封的管螺纹 命名、尺寸和公差》.pdf

ONORM ISO 228 Teil 2-1984 Pipe threads where pressure-tight joints are not made on the threads Verification by means of limit gauges《非螺纹密封的管螺纹 限制量规确认》.pdf

ONORM ISO 2320-1991 《带有夹持部分的六角螺母 机械和功能特性》.pdf

ONORM ISO 2380 Teil 1-1990 Screwdrivers for slotted-head screws tips for hand- and machine-operated screwdrivers《槽头螺钉改锥 手工及机械操作用的改锥头》.pdf