TCVN 5139-2008 Recommended methods of sampling for the determination of pesticide residues for compliance with MRLs《为测定农药残留以符合MRLs(最大残留限量)的推荐取样方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 95FTM11-1995 Feature-Based Definition of Bevel Gears《伞形齿轮基于功能的定义》.pdf

AGMA 95FTM12-1995 Flank Modifications in Bevel Gears Using a Universal Motion Concept《基于通用运动概念对伞形齿轮进行侧翼修改》.pdf

AGMA 95FTM13-1995 Powder Metallurgy Gears - Expanding Opportunities《粉末冶金齿轮.膨胀机会》.pdf

AGMA 95FTM14-1995 Study of Effect of Machining Parameters on Performance of Worm Gears《加工切削参数对涡轮性能影响的研究》.pdf

AGMA 95FTM2-1995 Separation of Runout from Elemental Inspection Data《摆差和基本检测数据的分离》.pdf

AGMA 95FTM3-1995 Effect of Manufacturing Errors on the Predicted Dynamic Factors of Spur Gears《制造误差对直齿轮预计动力因数的影响》.pdf

AGMA 95FTM4-1995 Experimental Test Stand to Measure Loaded Transmission Error in Fine-Pitch Plastic Gears《测量小节距塑料齿轮的负荷传动误差的实验室试验台》.pdf

AGMA 95FTM5-1995 Surface Fatigue Life of Contour Induction Hardened AISI 1552 Gears《沿齿廓感应淬火硬化AISI1552齿轮的表面疲劳寿命》.pdf

AGMA 95FTM6-1995 Development of an Epicyclic Gearbox for Reduced Sub-Synchronous Vibrations in Gas Turbo-Generator Sets《要发展成为一个行星齿轮箱 为降低次同步振动的天然气涡轮发电机组》.pdf