TCVN 5699-2-5-2005 Household and similar electrical appliances Safety Part 2-5 Particular requirements for dishwashers《家用和类似用途电器 安全 第2-5部分 洗碗机的详细要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2096-2011 Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)《用内增压法检测包装中总泄漏的标准试验方法(泡沫试验)》.pdf

ASTM F2097-2007 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products《医疗产品用基本柔软包装的设计和评估用标准指南》.pdf

ASTM F2097-2008 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products.pdf

ASTM F2097-2010 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products《医用产品用一级软包装的设计和评估标准指南》.pdf

ASTM F2097-2014 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products《医疗产品初级软包装的设计和评估标准指南》.pdf

ASTM F2097-2016 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products《医疗产品初级软包装的设计和评估标准指南》.pdf

ASTM F2098-2004e1 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings《保证SDR9交联聚乙烯(PEX)管用金属插件安全的不锈钢夹子.pdf

ASTM F2098-2008 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings《保证SDR9交联聚乙烯(P.pdf

ASTM F2098-2015 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings《保证SDR9交联聚乙烯 (.pdf