TCVN 6259-8A-2003 SD 2-2005 Rules for the classification and construction of sea-going steel ships Part 8A Steel Barges《钢质海船的入级和建造规范 第8A部分 钢驳船》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN 993-18-2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum《成形致密耐火制品的试验方法 真空汞法测定颗粒状.pdf

BS EN 993-19-2004 Methods of test for dense shaped refractory products - Determination of thermal expansion by a differential method《致密成型耐火制品试验方法 由差动法测定热膨胀性》.pdf

BS EN 993-2-1995 Methods of test for dense shaped refractory products - Determination of true density《致密成型耐火制品的试验方法 实密度测定》.pdf

BS EN 993-3-1997 Methods of test for dense shaped refractory products - Test methods for carbon-containing refractories《成型密实耐火制品的试验方法 第3部分 含碳耐火材料的试验方法》.pdf

BS EN 993-4-1995 Methods of test for dense shaped refractory products - Determination of permeability to gases《致密成型耐火制品的试验方法 气体渗透率测定》.pdf

BS EN 993-5-2000 Methods of test for dense shaped refractory products - Determination of cold crushing strength《成型密实耐火制品的试验方法 抗冷压碎强度的测定》.pdf

BS EN 993-6-1995 Methods of test for dense shaped refractory products - Determination of modulus of rupture at ambient temperature《致密成型耐火制品的试验方法 环境温断裂模量的测定》.pdf

BS EN 993-7-2000 Methods of test for dense shaped refractory products - Determination of modulus of rupture at elevated temperatures《成型密实耐火制品的试验方法 高温下断裂模数的测定》.pdf

BS EN 993-9-1997 Methods of test for dense shaped refractory products - Determination of creep in compression《成型密实耐火制品的检验方法 第9部分 压缩蠕变的测定》.pdf