TCVN 6396-2-2009 Hydraulic lifts Safety requirements for the construction and installation《液压升降机 制造和安装用安全要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M99J309-A-2012 MOLDED COATING FOR COMPRESSION MOLDED FRP - RESIN PORTION TO BE USED WITH FORD WSS-M99P1111-A 《压缩成型纤维增强材料模塑涂层 树脂部分 与福特WSS-M99P1111-A 一起使用》.pdf

FORD ESB-M99J310-A-2012 MOLDED COATING FOR COMPRESSION MOLDED FRP - HARDENER PORTION TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M99J309-A)《压缩成型纤维增强材料模塑涂层 固化剂部分 与福特WS.pdf

FORD ESB-M99J311-A-2012 CHIP RESISTANT COATING ONE-COMPONENT URETHANE - PAINTABLE HEAT CURING NON-MASKING TO BE USED WITH FORD WSS-M99P1111-A 《单组份尿烷可涂装且热固化的不遮蔽抗剥落涂层 与福特WSS-M99P1.pdf

FORD ESB-M99J311-A2-2012 CHIP RESISTANT COATING - ONE-COMPONENT URETHANE - PAINTABLE LOW HEAT CURING NON-MASKING TO BE USED WITH FORD WSS-M99P1111-A 《单组份尿烷可涂装且低热固化的不遮蔽抗剥落涂层 与福特W.pdf

FORD ESB-M99J314-A-2012 CATALYST ACID - POLYESTER BASECOAT CLEARCOAT LOW BAKE REPAIR PROCESS (MALEIC ACID) TO BE USED WITH FORD WSS-M99P1111-A 《酸催化剂 低烘烤修复工艺(马来酸)聚酯底涂层 清漆 与福特WSS-.pdf

FORD ESB-M99J315-A-2012 CHIP RESISTANT REPAIR COATING - TWO-COMPONENT URETHANE - PAINTABLE - LOW BAKE TO BE USED WITH FORD WSS-M99P1111-A 《抗剥落修复涂层 可涂装的低烘烤双组分尿烷 与福特WSS-M99P1111-A.pdf

FORD ESB-M99J319-A-2012 CATALYST ACID - POLYESTER BASECOAT CLEARCOAT LOW BAKE REPAIR PROCESS (BUTYL ACID MALEATE) TO BE USED WITH FORD WSS-M99P1111-A 《酸催化剂 低烘烤修复工艺(丁基酸式马来酸盐)聚酯底涂层.pdf

FORD ESB-M99J330-A-2012 CATALYST ACID (SOLUTION) - HIGH SOLIDS LOW VOC THERMOSET BASECOAT CLEARCOAT LOW BAKE REPAIR PROCESS TO BE USED WITH FORD WSS-M99P1111-A 《酸催化剂(溶液) 低烘烤修复工艺高.pdf

FORD ESB-M99J331-A-2012 MOLDED COATING FOR COMPRESSION MOLDED FRP - ONE COMPONENT TO BE USED WITH FORD WSS-M99P1111-A 《压缩塑膜纤维增强塑料的单组分塑膜涂层 与福特WSS-M99P1111-A 一起使用》.pdf