TCVN 6854-2001 Decontamination of radioactively contaminated surfaces Method for testing and assessing the ease of decontamination《放射性污染表面去污 试验与评价去污难易程度的方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 07FTM05-2007 Vacuum Carburizing System for Powder Metal Parts and Components《粉末冶金零件和组件用真空渗碳处理系统》.pdf

AGMA 07FTM06-2007 Using Barkhausen Noise Analysis for Process and Quality Control in the Production of Gears《齿轮生产过程中使用巴克豪森噪声分析进行工艺和质量控制》.pdf

AGMA 07FTM07-2007 Grinding Induced Changes in Residual Stresses of Carburized Gears《磨削产生的渗碳齿轮残余应力的变化》.pdf

AGMA 07FTM08-2007 Manufacturing Net Shaped Cold Formed Gears《生产精密冷锻齿轮》.pdf

AGMA 07FTM09-2007 The Ikona Clutch and Differential《Ikona离合器及差动齿轮》.pdf

AGMA 07FTM10-2007 The Gear Dynamic Factor Historical and Modern Perspectives《齿轮动态系数 历史和现代观点》.pdf

AGMA 07FTM11-2007 Helicopter Accessory Gear Failure Analysis Involving Wear and Bending Fatigue《含齿轮和弯曲疲劳的直升机辅助齿轮的故障分析》.pdf

AGMA 07FTM12-2007 The Effect of Start--Up Load Conditions on Gearbox Performance and Life -- Failure Analysis and Case Study《开始负载状态对齿轮箱性能和寿命的影响.疲劳分析和案例研究》.pdf

AGMA 07FTM13-2007 Influence of Grinding Burn on the Load Carrying Capacity of Parts Under Rolling Stress《磨险伤对滚动应力下零件承载量的影响》.pdf