TCVN 7013-1-2002 Machine tools Test conditions for pillar type vertical drilling machines Testing of the accuracy Part 1 Geometrical tests《机床 柱型立式钻床的检验条件 精度检验 第1部分 几何试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 32251-2015 熔模铸造工艺 污染物的控制.pdf

GB T 32252-2015 熔模铸造工艺 通用技术导则.pdf

GB T 32253-2015 直齿锥齿轮精密热锻件 结构设计规范.pdf

GB T 32254-2015 直齿锥齿轮精密热锻件 通用技术条件.pdf

GB T 32255-2015 高温承压马氏体不锈钢和合金钢通用铸件.pdf

GB T 32256-2015 钢质减速齿环锻件 通用技术条件.pdf

GB T 32257-2015 镍及镍合金熔化焊焊工技能评定.pdf

GB T 32258-2015 钢质楔横轧件 通用技术条件.pdf

GB T 32259-2015 焊缝无损检测 熔焊接头目视检测.pdf