TCVN 7303-2-29-2009 Medical electrical equipment Part 2-29 Particular requirements for the basic safety and essential performance of radiotherapy simulators《医用电气设备 第2-29部分 放射治疗模拟机的.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSF-M2G385-A1-2015 ADHESIVE TWO COMPONENT SILICONE THERMALLY CONDUCTIVE HIGH DIELECTRIC STRENGTH TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSF-M2L68-A3-2005 COPPER WIRE SOFT ROUND POLYURETHANE (PUR) INSULATION WITH POLYAMIDE (PA) OVERCOAT 155 (98 Cu C 2 Ni) TO BE USED WITH FORD WSS-M99P1111-A 《155℃(98铜 2镍)聚酰胺(P.pdf

FORD WSF-M2L68-A4-2005 COPPER WIRE SOFT ROUND POLYURETHANE (PUR) INSULATION WITH POLYAMIDE (PUR) OVERCOAT 155 (98 Cu C 2 Ni) TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSF-M2L.pdf

FORD WSF-M2L68-A5-2005 COPPER WIRE SOFT ROUND POLYURETHANE (PUR) INSULATION WITH POLYAMIDE (PA) OVERCOAT 155 (94 Cu C 6 Ni) TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSF-M2L6.pdf

FORD WSF-M2L68-A6-2005 COPPER WIRE SOFT ROUND POLYURETHANE (PUR) INSULATION WITH POLYAMIDE (PA) OVERCOAT 155 (78 Cu C 22 Ni) TO BE USED WITH FORD WSS-M99P1111-A 《155℃(78铜 22镍)聚酰胺.pdf

FORD WSF-M2L68-A7-2005 COPPER WIRE SOFT ROUND WITH POLYAMIDE-IMIDE INSULATION 200 TO BE USED WITH FORD WSS-M99P1111-A 《最高工作温度200℃、带聚酰胺-酰亚胺绝缘层的软圆铜丝 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSF-M2L68-A8-2005 COPPER WIRE SOFT ROUND WITH POLYAMIDE-IMIDE INSULATION 200 TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSF-M2L68-A7)《最高工作温度200℃、带聚酰胺-酰亚胺绝缘层的软圆铜丝 与标准FORD.pdf

FORD WSF-M2L68-A9-2005 COPPER WIRE SOFT ROUND WITH POLYAMIDE-IMIDE INSULATION 200 TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSF-M2L68-A7)《最高工作温度200℃、带聚酰胺-酰亚胺绝缘层的软圆铜丝 与标准FORD.pdf

FORD WSF-M3D165-A-2006 UNSATURATED POLYESTER (UP) 12% GLASS FIBER REINFORCED HIGH HEAT RESISTANT COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《12%玻璃纤维增强的不饱和聚酯.pdf