TCVN 7394-2-2008 Packaging for terminally sterilized medical devices Part 2 Validation requirements for forming sealing and assembly processes《最终灭菌医疗器械的包装 第2部分 成形 密封和装配过程的确认要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DLA AN502 REV 6 NOTICE 2-1998 SCREW - MACHINE DRILLED FILLISTER HEAD FINE THREAD《细螺纹有孔凹槽螺帽的机螺钉》.pdf

DLA AN502 REV 6 VALID NOTICE 1-1994 SCREW - MACHINE DRILLED FILLISTER HEAD FINE THREAD《细螺纹有孔凹槽螺帽的机螺钉》.pdf

DLA AN502 REV 6-1953 SCREW - MACHINE DRILLED FILLISTER HEAD FINE THREAD《细螺纹有孔凹槽螺帽的机螺钉》.pdf

DLA AN503 REV 5 NOTICE 2-1997 SCREW - MACHINE DRILLED FILLISTER HEAD COARSE THREAD《粗螺纹有孔凹槽螺帽的机螺钉》.pdf

DLA AN503 REV 5 VALID NOTICE 1-1994 SCREW - MACHINE DRILLED FILLISTER HEAD COARSE THREAD《粗螺纹有孔凹槽螺帽的机螺钉》.pdf

DLA AN503 REV 5-1953 SCREW - MACHINE DRILLED FILLISTER HEAD COARSE THREAD《粗螺纹有孔凹槽螺帽的机螺钉》.pdf

DLA AN505 REV 7 NOTICE 1-1999 SCREW MACHINE FLAT HEAD 82 DEGREE COARSE THREAD《粗螺纹82度平头机螺钉》.pdf

DLA AN505 REV 7-1997 SCREW MACHINE FLAT HEAD 82 DEGREE COARSE THREAD《粗螺纹82度平头机螺钉》.pdf

DLA AN508 REV A NOTICE 3-1999 SCREW ROUND HEAD MACHINE (FOR ELECTRICAL USE)《圆头机螺钉(电气使用)》.pdf