1、 TIA-102.BAEA-C (Revision of TIA-102.BAEA-B) December 2015Project 25 Data Overview and Specification ANSI/TIA-102.BAEA-C-2015 APPROVED: DECEMBER 9, 2015 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufactu
2、rers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or n
3、on-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by
4、 TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all saf
5、ety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this docume
6、nt are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-102.BAEA-C, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.5 Subcommittee on Sign
7、aling and Data Transmission). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICA
8、TIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or sof
9、t copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at
10、: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or c
11、hanged in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. Wh
12、en IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into,
13、the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not w
14、arrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, d
15、evelopment or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or ob
16、ligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published p
17、ending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the
18、 contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE
19、 ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS
20、OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES,
21、 DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF
22、CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH L
23、IMITATIONS. TIA-102.BAEA-C i Foreword (This foreword is not part of this document.) This document has been created in response to a request by the Project 25 Steering Committee as provided for in a Memorandum of Understanding (MOU) dated April 1992 and amended December 1993. The MOU states that the
24、Project 25 Steering Committee shall devise a Common System Standard for digital public safety communications (the Standard) commonly referred to as Project 25 or P25, and that TIA, as agreed to by the membership of the appropriate TIA Engineering Committee, will provide technical assistance in the d
25、evelopment of documentation for the Standard. If the abbreviation “P25” or the wording “Project 25” appears on the cover sheet of this document when published that indicates the Project 25 Steering Committee has adopted this document as part of the Standard. The appearance of the abbreviation “P25”
26、or the wording “Project 25” on the cover sheet of this document or in the title of any document referenced herein should not be interpreted as limiting the applicability of the information contained in any document to “P25” or “Project 25” implementations exclusively. This document provides an overv
27、iew of TIA-102 Data Services and specification of TIA-102 Packet Data Services. This document was developed by the TIA TR-8.5 Signaling and Data Transmission Subcommittee based on materials originated by the APCO1Project 25 Interface Committee (APIC) Data Task Group (DTG). The 4thedition (Revision C
28、) of this document updated TIA-102.BAEA-B to address errata comments. This document cancels and replaces TIA-102.BAEA-B. TIA does not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In Publishing the Document, TIA disclaims
29、any undertaking to perform any duty owed to or for anyone. Some aspects of the specifications contained in this document may not have been fully operationally tested; however, a great deal of time and good faith effort has been invested in the preparation of this document to ensure the accuracy of t
30、he information it contains. 1APCO is an abbreviation for the Association of Public-Safety Communications Officials. TIA-102.BAEA-C ii Patent Identification The readers attention is called to the possibility that compliance with this document may require the use of one or more inventions covered by p
31、atent rights. By publication of this document, no position is taken with respect to the validity of those claims or any patent rights in connection therewith. The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and
32、 nondiscriminatory terms and conditions to applicants desiring to obtain such licenses. The following patent holders and patents have been identified in accordance with the TIA intellectual property rights policy: No patents have been identified TIA shall not be responsible for identifying patents f
33、or which licenses may be required by this document or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. TIA-102.BAEA-C iii Table of Contents 1. Introduction . 1 1.1 Scope . 1 1.2 References . 1 1.2.1 Normative References 1 1.2.2 Informative
34、 References 2 1.3 Acronyms and Abbreviations 2 1.4 Definitions . 3 2. Data Services 5 2.1 Low Speed Data Service 5 2.2 Supplementary Services . 5 2.2.1 Pre-Programmed Data Service 5 2.2.2 Supplementary Data Service 5 2.3 Packet Data Service . 5 3. Packet Data Interfaces . 7 3.1 UmInterface 7 3.2 EdI
35、nterface . 8 3.3 A Interface 8 3.4 G Interface 8 3.5 EfInterface . 8 3.6 EcInterface . 8 3.7 Um2Interface . 9 4. Packet Data Bearer Services . 10 4.1 CAI Data Bearer Service 10 4.2 IP Data Bearer Service . 10 5. Packet Data Configurations . 11 5.1 Direct Data . 11 5.2 Repeated Data . 12 5.3 Conventi
36、onal FNE Data 12 5.4 Trunked FNE Data 14 6. Architecture Overview . 15 6.1 CAI Data Bearer Service Architecture 15 6.1.1 Direct Data Configuration . 15 6.1.1.1 Confirmed Data Packet Delivery Symmetric Address 16 6.1.1.2 Unconfirmed Data Packet Delivery Symmetric Address 16 6.1.2 Repeated Data Config
37、uration . 16 6.1.2.1 Confirmed Data Packet Delivery Symmetric Address 17 6.1.2.2 Unconfirmed Data Packet Delivery Symmetric Address 17 6.1.3 Conventional FNE Data Configuration 17 6.1.3.1 Confirmed Data Packet Delivery Asymmetric Address 18 6.1.3.2 Unconfirmed Data Packet Delivery Asymmetric Address
38、 18 TIA-102.BAEA-C iv 6.1.3.3 Conventional Management Service 18 6.1.4 Trunked FNE Data Configuration 19 6.2 IP Data Bearer Service Architecture . 19 6.2.1 Direct Data Configuration 19 6.2.1.1 Confirmed Data Packet Delivery Symmetric Address 19 6.2.1.2 Unconfirmed Data Packet Delivery Symmetric Addr
39、ess 20 6.2.1.3 IPv4 and SCEP . 20 6.2.2 Repeated Data Configuration . 20 6.2.2.1 Confirmed Data Packet Delivery Symmetric Address 21 6.2.2.2 Unconfirmed Data Packet Delivery Symmetric Address 21 6.2.2.3 IPv4 and SCEP . 21 6.2.3 Conventional FNE Data Configuration 21 6.2.3.1 Confirmed Data Packet Del
40、ivery Asymmetric Address 22 6.2.3.2 Unconfirmed Data Packet Delivery Asymmetric Address 22 6.2.3.3 Conventional Management Service 22 6.2.3.4 IPv4 and SCEP . 23 6.2.3.5 IPv4 and SNDCP 23 6.2.3.6 IP Data Security Service . 23 6.2.4 Trunked FNE Data Configuration 23 6.2.4.1 Trunked Management Services
41、 24 6.2.4.2 Confirmed Data Packet Delivery Asymmetric Address 25 6.2.4.3 Unconfirmed Data Packet Delivery Asymmetric Address 25 6.2.4.4 IPv4 and SNDCP 25 6.2.4.5 IP Data Security Service . 25 7. Packet Data Test Suite . 26 TIA-102.BAEA-C v List of Figures Figure 1 Direct Data Configuration Functiona
42、l Model . 11 Figure 2 Repeated Data Configuration Functional Model . 12 Figure 3 Conventional FNE Data Configuration Functional Model 13 Figure 4 Trunked FNE Data Configuration Functional Model . 14 Figure 5 CAI Data Bearer Service Direct Data UmStack Diagram 16 Figure 6 CAI Data Bearer Service Repe
43、ated Data UmStack Diagram 17 Figure 7 CAI Data Bearer Service Conventional FNE Data UmStack Diagram 18 Figure 8 IP Data Bearer Service Direct Data UmStack Diagram 19 Figure 9 IP Data Bearer Service Repeated Data UmStack Diagram 20 Figure 10 IP Data Bearer Service Conventional FNE Data UmStack Diagra
44、m . 22 Figure 11 IP Data Bearer Service Trunked FNE Data UmStack Diagram 1 . 24 Figure 12 IP Data Bearer Service Trunked FNE Data UmStack Diagram 2 . 24 List of Tables Table 1 TIA-102 Supplementary Services Document Suite 5 Table 2 TIA-102 Packet Data Service Document Suite . 6 Table 3 TIA-102 Open
45、System Interfaces Relevant for Packet Data . 7 Table 4 EdInterface Protocol Combinations 8 Table 5 A Interface Protocol Combinations . 8 Table 6 Packet Data Bearer Services 10 Table 7 Packet Data Configurations 11 Table 8 Direct Data Configuration Scenarios . 12 Table 9 Repeated Data Configuration S
46、cenarios . 12 Table 10 Conventional and Trunked FNE Data Configuration Scenarios 13 Table 11 Packet Data Bearer Service / Configuration Combinations . 15 Table 12 CMS Functions . 18 Table 13 Direct Data SCEP Functions . 20 Table 14 Repeated Data SCEP Functions 21 Table 15 Conventional FNE Data SCEP
47、Functions . 23 Table 16 Conventional FNE Data SNDCP Functions 23 Table 17 TMS Functions 25 Table 18 Trunked FNE Data SNDCP Functions 25 TIA-102.BAEA-C vi Revision History Version Date Description Interim Standard 02/15/1995 Update TIA/EIA- PN-3373 letter ballot with all commented corrections Origina
48、l 02/01/2000 Editorial revisions from TIA/EIA- PN4633 letter ballot comments and made into TIA/EIA-102.BAEA Revision A 05/24/2004 Incorporate the ANSI/TIA/-102.BAEA-1-2002 addendum that defined the application of the Universal Serial Bus (USB) Specification and the Point-to-Point Protocol (PPP) to t
49、he Physical and Link Layers of the A Interface between the Mobile Data Peripheral (MDP) and the Subscriber Unit (SU) in the TIA-102 Open System Interface Model; elimination of ambiguity related to options; editorial changes per SP-3-4633-RV1 ballot comment resolution; editorial updates per TIA guidelines Revision B 02/08/2012 Restructured the document to provide a comprehensive overview; defined new structure for packet data service document suite; removed circuit data bearer service; removed Anne
