1、 TIA-2001.3-E-3 (Addendum to TIA-2001.3-E) November 2012Interoperability Specification (IOS) for cdma2000Access Network Interfaces- Part 3 Features NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers
2、and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-me
3、mber of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA
4、in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety p
5、roblems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN-2001.3-E-3, form
6、ulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The u
7、se or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applica
8、tions are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a
9、 party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or pro
10、vided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a s
11、tandard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or let
12、ters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publi
13、cations of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs
14、 or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTAB
15、ILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE S
16、AFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITH
17、OUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISE
18、D OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-2001.3-E-3 Revision History Date Publication Description June 2007 A.S0013-D v1.0 For fea
19、tures supported, refer to the Overview 11, section 1.1. August 2009 A.S0013-D v2.0 Updates to support 1x air interface enhancements, EVRC-W B on A2p, EVRC-NW on A2 and A2p and bug fixes. May 2011 A.S0013-D v3.0 Support for callback of an emergency call origination, EVRC-NW capacity operating point 0
20、, and bug fixes. August 2012 A.S0013-D v4.0 Support for EVRC-B, EVRC-W B, EVRC-NW, EVRC-NW2K, USSD, MSC-BS indication of Device Type and bug fix. TIA-2001.3-E-3 (This page intentionally left blank.) TIA-2001.3-E-3 i Table of Contents 1 2 3 Foreword xvi 4 1.0 Introduction . 1 5 1.1 Overview . 1 6 1.1
21、.1 Purpose 6 7 1.1.2 Scope . 6 8 1.2 References . 6 9 1.2.1 Normative References 6 10 1.2.2 Informative References 8 11 1.3 Terminology 8 12 1.3.1 Acronyms . 8 13 1.3.2 Definitions 11 14 1.4 Call Processing and Supplementary Services Assumptions . 12 15 1.4.1 Call Control 12 16 1.4.1.1 A2, and A5 Be
22、arer Allocation 12 17 1.4.1.2 Radio Channel Allocation . 12 18 1.4.1.3 Traffic Channel Release 12 19 1.4.1.4 A3 User Traffic Subchannel Allocation 12 20 1.4.1.5 A2p Bearer Allocation . 12 21 1.5 Radio Resource Management Assumptions 13 22 1.5.1 Radio Channel Supervision . 13 23 1.5.1.1 Traffic Chann
23、el Radio Link Supervision 13 24 1.5.1.2 Idle Channel Observation 13 25 1.5.2 Radio Channel Management . 13 26 1.5.2.1 Radio Channel Configuration Management. 13 27 1.5.2.2 Radio Traffic Channel Management . 13 28 1.5.2.2.1 Radio Channel Allocation 13 29 1.5.2.2.2 Radio Traffic Channel Release . 13 3
24、0 1.5.2.2.3 Radio Traffic Channel Power Control. 13 31 1.5.2.2.4 Channel Encoding and Decoding . 14 32 1.6 Documentation Conventions 14 33 2.0 Feature Descriptions 15 34 2.1 Call Setup of Voice and Circuit Data Calls . 15 35 2.2 Call Clearing of Voice and Circuit Data Calls 15 36 2.2.1 Call Clearing
25、 Initiated by the MS or BS . 15 37 2.2.2 Call Clearing Initiated by the MSC 16 38 2.3 Tandem Free Operation (TFO) Support . 16 39 2.4 Test Calls . 17 40 2.5 Support of DTMF. 18 41 2.6 Support of Supplementary Services 18 42 2.6.1 Feature Activation and Deactivation . 18 43 2.6.2 Call Waiting . 19 44
26、 2.6.3 Three Way Calling 19 45 2.6.4 Message Waiting Notification 19 46 2.6.5 Call Barring 20 47 2.6.6 Calling Number ID Presentation / Restriction . 20 48 2.6.6.1 CNIR for Mobile Originated Calls 21 49 2.6.6.2 CNIP/CNIR for Mobile Terminated Calls 21 50 2.6.7 Distinctive Ringing . 21 51 2.6.8 Answe
27、r Holding 21 52 2.6.9 User Selective Call Forwarding 22 53 2.7 Mobile Registration . 22 54 2.8 Global Emergency Call Origination . 22 55 TIA-2001.3-E-3 ii 2.9 E911 Phase 1 and Phase 2 23 1 2.10 Short Message Service 23 2 2.11 Priority Access and Channel Assignment (PACA) 24 3 2.12 Over-The-Air Servi
28、ce Provisioning (OTASP) and Over The Air Parameter Administration 4 (OTAPA) . 25 5 2.12.1 OTASP Support. 25 6 2.12.2 OTAPA Support 25 7 2.13 Mobile Position Determination 25 8 2.13.1 Support of Position Determination Services (MS PDE Approach) 25 9 2.13.2 Software Calculation Position Determination
29、(BS MSC Approach) 26 10 2.14 User Zone 26 11 2.15 ISDN Interworking 26 12 2.16 Circuit Data Calls . 27 13 2.17 3G Packet Data Calls . 27 14 2.17.1 Packet Data Assumptions 29 15 2.17.2 Previous and Current Access Network Identifiers (PANID/CANID) . 30 16 2.17.3 PDSN Selection Algorithm . 30 17 2.17.4
30、 Packet Data Interface Descriptions 30 18 2.17.4.1 A8/A9 Interface Descriptions . 30 19 2.17.4.2 A10/A11 Interface Descriptions. 31 20 2.17.5 Interoperability Control 31 21 2.17.6 Short Data Bursts 31 22 2.17.7 Common Channel Packet Data (CCPD) . 32 23 2.17.8 Packet Data Security Considerations . 32
31、 24 2.17.9 Support for AAA-Based Radio Network Packet Data Inactivity Timer (RN-PDIT) 33 25 2.17.10 Support for Always-on Service. 33 26 2.17.11 1x-Evolved High-Speed Integrated Data and Voice Support 33 27 2.17.12 Flow Control 34 28 2.18 Concurrent Services (Circuit Voice and Packet Data). 34 29 2.
32、19 Handoff 34 30 2.19.1 Handoff via MSC 34 31 2.19.2 Handoff via Direct BS-to-BS Signaling 35 32 2.19.3 Inter-BS Hard Handoff into Intra-BS Soft Handoff 35 33 2.19.4 Fast Handoff. 35 34 2.19.5 Intergeneration Packet Data Handoff 39 35 2.19.6 Alternate Dormant Handoff. 39 36 2.20 Security Features 40
33、 37 2.20.1 Authentication 40 38 2.20.1.1 2G Terminal Authentication and Key Generation 40 39 2.20.1.2 3G Authentication and Key Generation 41 40 2.20.2 Signaling Message Encryption . 42 41 2.20.3 Voice/Data Privacy . 42 42 2.20.4 Extended Encryption for Signaling and User Traffic . 42 43 2.20.5 Mess
34、age Integrity 43 44 2.21 Flex Rate 43 45 2.22 Status Inquiry 43 46 2.23 3X Multi-Carrier Operation 44 47 2.24 5 ms Messaging 44 48 2.25 Enhanced Rate Adaptation Mode (ERAM) . 44 49 2.26 Code Combining Soft Handoff (CCSH) 44 50 2.27 Rescue Channel 44 51 2.28 Terrestrial Circuit Management. 45 52 2.28
35、.1 Terrestrial Circuit Management for the A2/A5 Interface. 45 53 2.28.2 Terrestrial Circuit Management for the A3 Interface . 45 54 2.29 Vocoder Support 46 55 2.30 Reverse FCH Gating 46 56 TIA-2001.3-E-3 iii 2.31 Voice-over-IP (VoIP) 47 1 2.31.1 Voice over IP Handoff Considerations 47 2 2.32 Network
36、 Directed System Selection (NDSS) 47 3 2.33 Transcoder Free Operation (TrFO) . 48 4 2.34 Remote Transcoder Operation (RTO) 48 5 2.35 Voice Preference Over Packet (VPOP) 48 6 2.36 Circuit-Switched Video Conferencing Calls . 49 7 2.37 Fast Call Setup 49 8 2.37.1 Direct Channel Assignment. 49 9 2.38 Su
37、pport for cdma2000 Pre-Rev D MEID Capable Mobiles . 49 10 2.39 Support for Enhanced Frequency Hashing and Band Subclasses 49 11 2.40 Event Notification 50 12 2.41 Additional Geographical Location Information 50 13 2.42 Flex Duplex Channel . 50 14 2.43 Unstructured Supplementary Service Data 50 15 2.
38、44 Features Supported Transparently in this Standard 51 16 2.44.1 Emergency Service (Basic) via Specific Dialed Number 51 17 2.44.2 Carrier Access 51 18 2.44.3 Call Forwarding . 51 19 2.44.3.1 Call Forwarding Unconditional 51 20 2.44.3.2 Call Forwarding When Busy 52 21 2.44.3.3 Call Forwarding - No
39、Answer 52 22 2.44.3.4 Call Forward Default 52 23 2.44.4 Call Delivery 52 24 2.44.5 Advice of Charge 52 25 2.44.6 Call Transfer 52 26 2.44.7 Lawfully Authorized Wiretap . 53 27 2.44.8 Access Control by Call Type (ACCT) 53 28 3.0 Feature Call Flows . 55 29 3.1 Call Setup of Voice and Circuit Data Call
40、s . 55 30 3.1.1 Mobile Origination Examples . 55 31 3.1.1.1 Mobile Origination . 55 32 3.1.1.1.1 Mobile Origination via a Circuit-Switched MSC 55 33 3.1.1.1.2 Mobile Origination with an MSCe with Bearer Parameters Sent in the CM Service 34 Request Message . 58 35 3.1.1.1.3 Mobile Origination with an
41、 MSCe with Bearer Parameters Sent in the Assignment 36 Complete Message 61 37 3.1.1.2 Mobile Origination with Access Probe Handoff, Access Handoff and Channel 38 Assignment into Soft/Softer Handoff 65 39 3.1.2 Mobile Termination Examples . 70 40 3.1.2.1 Mobile Termination 70 41 3.1.2.1.1 Mobile Term
42、ination via a Circuit-Switched MSC 70 42 3.1.2.1.2 Mobile Termination via an MSCe with the Bearer Parameters Sent in the Paging 43 Response Message 73 44 3.1.2.1.3 Mobile Termination via an MSCe Interfaces with Bearer Parameters Sent in the 45 Assignment Complete Message 75 46 3.1.2.2 Mobile Termina
43、tion, Assignment Retry . 78 47 3.1.3 Mid-Call Bearer Modification Examples 81 48 3.1.3.1 MSCe Initiated Bearer Modification . 81 49 3.1.3.2 BS Initiated Bearer Modification . 82 50 3.1.3.3 A1p Support for COP 0 . 82 51 3.2 Call Clearing of Voice and Circuit Data Calls 84 52 3.2.1 Call Clearing Initi
44、ated by the MS or BS . 84 53 3.2.2 Call Clearing Initiated by the MSC 84 54 3.2.2.1 Clear from the Network . 84 55 3.2.2.2 Call Clearing when Tones/Announcements are Provided . 85 56 TIA-2001.3-E-3 iv 3.2.2.3 Mobile Origination Failure Call Clearing with Local Tone Generation 85 1 3.2.3 Call Clearin
45、g Collision. 86 2 3.2.4 Call Flows for Call Clear Operation 87 3 3.2.4.1 Call Clear via Clear Request (MS Initiated) 87 4 3.2.4.2 Call Clear via Clear Request (BS Initiated) . 87 5 3.2.4.3 Call Clear via Clear Command. 88 6 3.3 TFO Support . 89 7 3.3.1 Call Flows for Transcoder Control 89 8 3.4 Test
46、 Calls . 89 9 3.5 Support of DTMF. 89 10 3.6 Support of Supplementary Services 89 11 3.6.1 Feature Activation and Deactivation . 90 12 3.6.1.1 Feature Activation/Deactivation in Idle Mode 90 13 3.6.1.2 Feature Activation/Deactivation While in a Call 90 14 3.6.2 Call Waiting . 91 15 3.6.3 Three Way C
47、alling 92 16 3.6.3.1 Three-Way Calling (Method 1). 92 17 3.6.3.2 Three-Way Calling - (Method 2) . 93 18 3.6.4 Message Waiting Notification 94 19 3.6.4.1 Message Waiting Notification on the Paging Channel. 94 20 3.6.4.2 Message Waiting Notification on the Traffic Channel. 95 21 3.6.5 Call Barring 95
48、22 3.6.5.1 Call Barring Incoming . 95 23 3.6.5.2 Call Barring Outgoing 95 24 3.6.6 Calling Number ID Presentation/Restriction 96 25 3.6.7 Distinctive Ringing . 96 26 3.6.8 Answer Holding 96 27 3.6.8.1 Answer Holding of a Mobile Terminated Call 97 28 3.6.8.2 Answer Holding of Call Waiting . 97 29 3.6
49、.9 User Selective Call Forwarding 98 30 3.6.9.1 User Selective Call Forwarding of a Mobile Terminated Call . 99 31 3.6.9.2 User Selective Call Forwarding of Call Waiting. 99 32 3.7 Mobile Registration .100 33 3.7.1 Mobile Initiated Location Registration .101 34 3.7.2 Power Down Registration at the End of a Call 101 35 3.7.3 Network Initiated Location Registration.102 36 3.7.4 Mobile Station Registered Notification.103 37 3.8 Global Emergency Call Origination .103 38 3.9 E911 Phase I and Phase 2 .103 39 3.10 Short Message Service 103 40 3.10.1 SMS Feature Description .104 41
