1、 TIA-856.500-C-1 November 2011Application, Stream and Session Layers for cdma2000 High Rate Packet Data Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers,
2、facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from
3、 manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance wi
4、th the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associat
5、ed with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN -856.500-C-1, formulated under t
6、he cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice
7、 of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are clai
8、med and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to disc
9、ussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the M
10、anual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, speci
11、fication, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assura
12、nce relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the
13、 other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services o
14、r any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS
15、NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALT
16、H EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION
17、 ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSI
18、BILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0024-500-C v2.0 Revision History Revision Description of Changes Date 1.0 Initial Publication Apri
19、l 2010 2.0 Point Release Publication July 2011 3GPP2 C.S0024-500-C v2.0 i CONTENTS 1 FOREWORD . xxiii 2 REFERENCES xxv 3 1 Default Signaling Application . 1-1 4 1.1 Introduction 1-1 5 1.1.1 General Overview . 1-1 6 1.1.2 Public Data 1-1 7 1.1.3 Data Encapsulation for the InUse Instance of the Signal
20、ing Application 1-1 8 1.2 Protocol Initialization . 1-3 9 1.2.1 Protocol Initialization for the InConfiguration Application Instance 1-3 10 1.2.2 Protocol Initialization for the InUse Application Instance . 1-3 11 1.3 General Signaling Requirements 1-3 12 1.3.1 General Requirements 1-3 13 1.3.2 Mess
21、age Information 1-4 14 1.4 Procedures and Messages for the InConfiguration Instance of the Signaling 15 Application 1-5 16 1.4.1 Procedures . 1-5 17 1.4.2 Commit Procedures 1-5 18 1.4.3 Message Formats . 1-6 19 1.4.3.1 ConfigurationRequest . 1-6 20 1.4.3.2 ConfigurationResponse . 1-6 21 1.5 Signalin
22、g Network Protocol . 1-7 22 1.5.1 Overview 1-7 23 1.5.2 Primitives and Public Data . 1-7 24 1.5.2.1 Commands . 1-7 25 1.5.2.2 Return Indications 1-7 26 1.5.3 Protocol Data Unit 1-7 27 1.5.4 Procedures and Messages for the InUse Instance of the Protocol 1-8 28 1.5.4.1 Procedures . 1-8 29 1.5.4.2 Type
23、 Definitions . 1-8 30 1.5.4.3 Messages . 1-9 31 1.5.4.4 SNP Header 1-10 32 3GPP2 C.S0024-500-C v2.0 ii 1.5.4.5 Interface to Other Protocols 1-10 1 1.5.4.5.1 Commands. 1-10 2 1.5.4.5.2 Indications . 1-10 3 1.6 Signaling Link Protocol 1-12 4 1.6.1 Overview . 1-12 5 1.6.2 Primitives and Public Data . 1
24、-12 6 1.6.2.1 Commands 1-12 7 1.6.2.2 Return Indications . 1-12 8 1.6.3 Protocol Data Unit . 1-12 9 1.6.4 Procedures 1-12 10 1.6.4.1 Reset . 1-12 11 1.6.4.2 Delivery Layer Procedures 1-13 12 1.6.4.2.1 General Procedures 1-13 13 1.6.4.2.1.1 Transmitter Requirements 1-13 14 1.6.4.2.1.2 Receiver Requir
25、ements 1-13 15 1.6.4.2.2 Best Effort Delivery Procedures . 1-13 16 1.6.4.2.2.1 Transmitter Requirements 1-13 17 1.6.4.2.2.2 Receiver Requirements 1-13 18 1.6.4.2.3 Reliable Delivery Procedures . 1-13 19 1.6.4.2.3.1 Overview 1-13 20 1.6.4.2.3.2 Initialization . 1-14 21 1.6.4.2.3.3 Data Transfer . 1-1
26、4 22 1.6.4.2.3.3.1 Transmit Procedures . 1-14 23 1.6.4.2.3.3.2 Receive Procedures . 1-15 24 1.6.4.3 Fragmentation Layer Procedures 1-16 25 1.6.4.3.1 Overview 1-16 26 1.6.4.3.2 Initialization . 1-16 27 1.6.4.3.3 Data Transfer . 1-17 28 1.6.4.3.4 Sender Requirements . 1-17 29 1.6.4.3.5 Receiver Requir
27、ements . 1-17 30 1.6.5 Header Formats . 1-18 31 1.6.5.1 SLP-F Header . 1-18 32 3GPP2 C.S0024-500-C v2.0 iii 1.6.5.2 SLP-D Header . 1-19 1 1.6.6 Message Formats . 1-20 2 1.6.6.1 Reset 1-20 3 1.6.6.2 ResetAck 1-20 4 1.6.6.3 Protocol Numeric Constants . 1-21 5 1.6.7 Interface to Other Protocols 1-21 6
28、1.6.7.1 Commands . 1-21 7 1.6.7.2 Indications . 1-21 8 1.7 Configuration Attributes for the Default Signaling Application 1-21 9 1.8 Session State Information 1-21 10 2 Default Packet Application . 2-1 11 2.1 Introduction 2-1 12 2.1.1 General Overview . 2-1 13 2.1.2 Public Data 2-1 14 2.1.3 Data Enc
29、apsulation for the InUse Instance of the Application . 2-1 15 2.2 Protocol Initialization . 2-2 16 2.2.1 Protocol Initialization for the InConfiguration Application Instance 2-2 17 2.3 Procedures and Messages for the InConfiguration Instance of the Packet 18 Application 2-2 19 2.3.1 Procedures . 2-2
30、 20 2.3.2 Commit Procedures 2-3 21 2.3.3 Message Formats . 2-3 22 2.3.3.1 ConfigurationRequest . 2-3 23 2.3.3.2 ConfigurationResponse . 2-4 24 2.4 Radio Link Protocol 2-5 25 2.4.1 Overview 2-5 26 2.4.2 Primitives and Public Data . 2-5 27 2.4.2.1 Commands . 2-5 28 2.4.2.2 Return Indications 2-5 29 2.
31、4.3 Protocol Data Unit 2-5 30 2.4.4 Procedures and Messages for the InUse Instance of the Protocol 2-5 31 2.4.4.1 Procedures . 2-5 32 2.4.4.1.1 Initialization and Reset . 2-5 33 3GPP2 C.S0024-500-C v2.0 iv 2.4.4.1.1.1 Initialization Procedure . 2-6 1 2.4.4.1.1.2 Reset Procedure 2-6 2 2.4.4.1.1.2.1 R
32、eset Procedure for the Initiating Side . 2-6 3 2.4.4.1.1.2.2 Reset Procedure for the Responding Side . 2-6 4 2.4.4.1.2 Data Transfer . 2-7 5 2.4.4.1.2.1 RLP Transmit Procedures 2-7 6 2.4.4.1.2.2 RLP Receive Procedures 2-8 7 2.4.4.2 RLP Packet Header . 2-9 8 2.4.4.3 Message Formats . 2-9 9 2.4.4.3.1
33、Reset . 2-9 10 2.4.4.3.2 ResetAck 2-9 11 2.4.4.3.3 Nak 2-10 12 2.4.4.4 Interface to Other Protocols 2-11 13 2.4.4.4.1 Commands. 2-11 14 2.4.4.4.2 Indications . 2-11 15 2.4.4.5 RLP Packet Priorities 2-11 16 2.4.5 Protocol Numeric Constants . 2-11 17 2.5 Location Update Protocol . 2-12 18 2.5.1 Overvi
34、ew . 2-12 19 2.5.2 Primitives and Public Data . 2-12 20 2.5.2.1 Commands 2-12 21 2.5.2.2 Return Indications . 2-12 22 2.5.3 Protocol Data Unit . 2-12 23 2.5.4 Procedures and Messages for the InUse Instance of the Protocol . 2-12 24 2.5.4.1 Procedures . 2-12 25 2.5.4.1.1 Access Network Requirements 2
35、-12 26 2.5.4.1.2 Access Terminal Requirements . 2-12 27 2.5.4.2 Message Formats . 2-13 28 2.5.4.2.1 LocationRequest . 2-13 29 2.5.4.2.2 LocationNotification 2-13 30 2.5.4.2.3 LocationAssignment . 2-14 31 2.5.4.2.4 LocationComplete . 2-15 32 3GPP2 C.S0024-500-C v2.0 v 2.5.4.3 Interface to Other Proto
36、cols 2-15 1 2.5.4.3.1 Commands . 2-15 2 2.5.4.3.2 Indications . 2-15 3 2.6 Flow Control Protocol . 2-16 4 2.6.1 Overview 2-16 5 2.6.2 Primitives and Public Data . 2-16 6 2.6.2.1 Commands . 2-16 7 2.6.2.2 Return Indications 2-17 8 2.6.3 Protocol Data Unit 2-17 9 2.6.4 Procedures and Messages for the
37、InUse Instance of the Protocol 2-17 10 2.6.4.1 Procedures . 2-17 11 2.6.4.1.1 Transmission and Processing of DataReady Message . 2-17 12 2.6.4.1.2 Close State . 2-17 13 2.6.4.1.2.1 Access Terminal Requirements 2-17 14 2.6.4.1.2.2 Access Network Requirements . 2-17 15 2.6.4.1.3 Open State . 2-17 16 2
38、.6.4.1.3.1 Access Terminal Requirements 2-18 17 2.6.4.1.3.2 Access Network Requirements . 2-18 18 2.6.4.2 Message Formats 2-18 19 2.6.4.2.1 XonRequest 2-18 20 2.6.4.2.2 XonResponse 2-18 21 2.6.4.2.3 XoffRequest 2-19 22 2.6.4.2.4 XoffResponse 2-19 23 2.6.4.2.5 DataReady 2-19 24 2.6.4.2.6 DataReadyAck
39、 2-20 25 2.6.5 Interface to Other Protocols 2-20 26 2.6.5.1 Commands . 2-20 27 2.6.5.2 Indications . 2-20 28 2.6.6 Protocol Numeric Constants . 2-20 29 2.7 Configuration Attributes for the Default Packet Application 2-22 30 2.8 Session State Information 2-22 31 2.8.1 Location Parameter 2-22 32 3GPP2
40、 C.S0024-500-C v2.0 vi 2.8.2 FlowControlState Parameter 2-23 1 3 Multi-Flow Packet Application . 3-1 2 3.1 Introduction 3-1 3 3.1.1 General Overview . 3-1 4 3.1.2 Public Data . 3-1 5 3.1.3 Data Encapsulation for the InUse Instance of the Application . 3-1 6 3.2 Protocol Initialization . 3-2 7 3.2.1
41、Protocol Initialization for the InConfiguration Application Instance . 3-2 8 3.3 Procedures and Messages for the InConfiguration Instance of the Packet 9 Application 3-2 10 3.3.1 Procedures 3-2 11 3.3.2 Commit Procedures . 3-3 12 3.3.3 Message Formats . 3-4 13 3.3.3.1 ConfigurationRequest. 3-4 14 3.
42、3.3.2 ConfigurationResponse 3-5 15 3.4 Radio Link Protocol . 3-6 16 3.4.1 Overview . 3-6 17 3.4.2 Primitives and Public Data . 3-6 18 3.4.2.1 Commands 3-6 19 3.4.2.2 Return Indications . 3-6 20 3.4.3 Protocol Data Unit . 3-6 21 3.4.4 Procedures and Messages for the InUse Instance of the Protocol . 3
43、-6 22 3.4.4.1 Procedures . 3-6 23 3.4.4.1.1 Initialization and Reset . 3-8 24 3.4.4.1.1.1 Initialization Procedure . 3-8 25 3.4.4.1.1.1.1 Initialization Procedure for the RLP Transmitter . 3-8 26 3.4.4.1.1.1.2 Initialization Procedure for the RLP Receiver 3-8 27 3.4.4.1.1.2 Reset Procedure 3-9 28 3.
44、4.4.1.1.2.1 Reset Procedure for the Initiating Side when it is an RLP 29 Transmitter . 3-9 30 3.4.4.1.1.2.2 Reset Procedure for Initiating Side when it is an RLP 31 Receiver . 3-9 32 3GPP2 C.S0024-500-C v2.0 vii 3.4.4.1.1.2.3 Reset Procedure for the Responding Side when it is an RLP 1 Receiver . 3-1
45、0 2 3.4.4.1.1.2.4 Reset Procedure for the Responding Side when it is a RLP 3 transmitter 3-10 4 3.4.4.1.1.2.5 RLP Reset Message Flows 3-10 5 3.4.4.2 Data Transfer . 3-11 6 3.4.4.2.1 RLP Transmit Procedures 3-11 7 3.4.4.2.1.1 Reservation State Maintenance 3-13 8 3.4.4.2.1.1.1 State-independent Requir
46、ements . 3-14 9 3.4.4.2.1.1.1.1 Access Terminal Requirements . 3-14 10 3.4.4.2.1.1.1.2 Access Network Requirements 3-15 11 3.4.4.2.1.1.2 Close State 3-15 12 3.4.4.2.1.1.2.1 Access Terminal Requirements . 3-15 13 3.4.4.2.1.1.2.2 Access Network Requirements 3-16 14 3.4.4.2.1.1.3 Open State 3-16 15 3.4
47、.4.2.1.1.3.1 Access Terminal Requirements . 3-16 16 3.4.4.2.1.1.3.2 Access Network Requirements 3-17 17 3.4.4.2.2 RLP Receive Procedures 3-18 18 3.4.4.3 RLP Packet Header . 3-20 19 3.4.4.4 Message Formats 3-20 20 3.4.4.4.1 ResetTxIndication . 3-20 21 3.4.4.4.2 ResetRxIndication . 3-21 22 3.4.4.4.3 R
48、esetTxIndicationAck . 3-21 23 3.4.4.4.4 ResetTxComplete 3-22 24 3.4.4.4.5 ResetRxComplete 3-22 25 3.4.4.4.6 Nak 3-23 26 3.4.4.4.7 ReservationOnRequest 3-24 27 3.4.4.4.8 ReservationOffRequest 3-25 28 3.4.4.4.9 ReservationAccept 3-26 29 3.4.4.4.10 ReservationReject . 3-26 30 3.4.4.4.11 RevReservationO
49、n . 3-28 31 3.4.4.4.12 RevReservationOff . 3-28 32 3.4.4.4.13 FwdReservationOff 3-29 33 3GPP2 C.S0024-500-C v2.0 viii 3.4.4.4.14 FwdReservationOn . 3-30 1 3.4.4.4.15 FwdReservationAck 3-30 2 3.4.4.4.16 AttributeUpdateRequest . 3-31 3 3.4.4.4.17 AttributeUpdateAccept . 3-31 4 3.4.4.4.18 AttributeUpdateReject 3-32 5 3.4.4.5 Interface to Other Protocols 3-32 6 3.4.4.5.1 Commands. 3-32 7 3.4.4.5.2 Indications . 3-32 8 3.4.4.6 RLP Packet Priorities 3-33 9 3.4.5 Protocol Numeric Constants . 3-33 10 3.5 Data Over Signaling Protocol . 3-34 11 3.5.1 Overview . 3-34 12 3.5.2 Primitives and Public Da
