TS 1803-1975 PLASTICS PVC BESINS DETERMINATION OF ASH AND SULPHATED ASH《塑料 聚氯乙烯树脂 硫酸灰分的测定》.pdf

相关资源

JIS K6876-2-2007 塑料.丙烯腈-苯乙烯-丙烯酸酯(ASA)、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯(AEPDS)和丙烯腈-(聚氯乙烯)-苯乙烯.pdf

JIS A4714-1995 硬质聚氯乙烯内窗窗框.pdf

JIS A5702-1993 硬质聚氯乙烯波纹板.pdf

QB T 2029-1994 丙烯腈-丁二烯-苯乙烯聚氯乙烯(ABSPVC)片材.pdf

JIS C3316-2000 电气设备用聚氯乙烯绝缘线.pdf

JIS A5705-2005 地板覆盖物 聚氯乙烯.pdf

JB T 7630.3-1998 铅酸蓄电池烧结聚氯乙烯隔板.pdf

JIS K6734-2000 塑料.未增塑的聚氯乙烯板.pdf

JIS K6743-2007 输水用硬质聚氯乙烯管接头.pdf

JIS K6777-2009 冷热水供水系统用氯化聚氯乙烯(PVC-C)管道配件(追補1).pdf

猜你喜欢

ASTM C1291-2016 Standard Test Method for Elevated Temperature Tensile Creep Strain Creep Strain Rate and Creep Time-to-Failure for Monolithic Advanced Ceramics《高级单片陶瓷的高温抗拉蠕变应变 蠕变应变.pdf

ASTM C1291-2018 Standard Test Method for Elevated Temperature Tensile Creep Strain Creep Strain Rate and Creep Time to Failure for Monolithic Advanced Ceramics《高级单片陶瓷的高温抗拉蠕变应变 蠕变应变.pdf

ASTM C1292-2000(2005) Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures《室温下连续纤维增强高级陶瓷剪切强度的标准试验方法》.pdf

ASTM C1292-2010 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures《室温下连续纤维增强高级陶瓷剪切强度的标准试验方法》.pdf

ASTM C1292-2016 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures《环境温度下连续纤维强化先进陶瓷的抗剪切强度的试验方法》.pdf

ASTM C1293-2006 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction《测定由于碱-硅石反应引起的混凝土长度变化的标准试验方法》.pdf

ASTM C1293-2008a Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction.pdf

ASTM C1293-2008b Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction《由于碱-硅反应引起的混凝土长度变化测定的标准试验方法》.pdf

ASTM C1293-2008b(2015) Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction《测定碱硅反应导致产生的混凝土长度变化的标准试验方法》.pdf