TS 186-1965 STANDARD REFERENCE TEMPERATURE FOR INDUSTRIAL LENGTH MEASUREMENTS《工业长度测量的标准参比温度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD FLTM EU-BP 052-1-2001 OZONE RESISTANCE OF THE TYRE SIDEWALLS.pdf

FORD FLTM EU-BP 053-02-2001 TEST FOR STAINING OF PAINT BY WATER EXRACTABLE INGREDIENTS IN RUBBER《用橡胶中水可提取成分测试涂料中的污斑》.pdf

FORD FLTM EU-BP 053-05-2001 DETERMINATION OF ADHESIVE STRENGTH OF JOINTS《接头粘合强度的测定》.pdf

FORD FLTM EU-BP 053-07-2001 COMPRESSION SET OF FOAMED SEALING PROFILES《泡沫密封型材的压缩永久变形》.pdf

FORD FLTM EU-BP 053-2-2001 TEST FOR STAINING OF PAINT BY WATER EXRACTABLE INGREDIENTS IN RUBBER.pdf

FORD FLTM EU-BQ 003-04-2000 DETERMINATION OF MICRO CRACK OR MICRO PORE DENSITY IN ELECTROPLATED CHROMIUM COATINGS《电镀镀铬层中的微裂纹或微孔密度的测定》.pdf

FORD FLTM EU-BQ 005-02-2000 SALT SPRAY TESTING OF FASTENERS《紧固件的盐雾试验》.pdf

FORD FLTM EU-BQ 005-2-2000 SALT SPRAY TESTING OF FASTENERS.pdf

FORD FLTM EU-BQ 006-03-2000 BUFFING OF STAINLESS STEEL FOR CORROSION TESTS《腐蚀试验用不锈钢件的打磨》.pdf