TS 2582-1977 General Methods Of Test For Pigments Part - IVDetermination Of Acidity Or Alkalinity Of The Agueous Extract《颜料一般测试方法 第4部分：水萃取液酸碱度的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS C A2 038-1987 Physical tests of meta s Determination ofapparent density ofmetallic povvders Funnel method《金属的物理测试 金属粉末松装密度的测定 漏斗法》.pdf

JUS C A2 039-1987 Physical tests of metafs etermination of apparent density of metallic povvders Oscillating funnel method《金属的物理测试 金属粉末松装密度的测定 振动漏斗法》.pdf

JUS C A2 041-1990 Perneable sintered metal materials Determinaticm of densitj oil content and open porosity《渗透性烧结金属材料 密度、油含量和开孔率的测定》.pdf

JUS C A2 051-1985 Testing of meta s Steel - Hardenability test by end guenching (Jominy test)《金属的测试 钢淬透性的末端淬火试验方法（Jominy 试验）》.pdf

JUS C A2 052-1978 Steel Determination and verification ofthe effective epth ofcarburhed and hardened cases《钢件渗碳淬火有效硬化层深度的测定和校核》.pdf

JUS C A2 052-1987 Metals tests Determination of the effective depth ofcarburized and hardened cases ofsteels《金属的试验 钢件渗碳淬火有效硬化层深度的测定》.pdf

JUS C A2 053-1978 Steel - determination ofeffective depth of hardening after flame or induction hardening《钢的感应淬火或火焰淬火后有效硬化层深度的测定》.pdf

JUS C A2 054-1987 Metals tests Determination of total or effective thickness of thin surface-hardened layers of steels《金属的测试 钢件薄表面总硬化层深度或有效硬化层深度的测定》.pdf

JUS C A2 055-1995 Heat treatment of ferrous metals - Forms which use as order for heat-treatment《黑色金属热处理 热处理订单表》.pdf