TS 3470-1980 PREFERRED DIAMETERS AF WIRE TERMINATIONS OF CAPACITORS AND RESISTORS《电容器和电阻器引出线端的优先直径》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F749-1998(2007)e1 Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit《兔子皮内注射评定材料抽提物》.pdf

ASTM F749-1998(2012) Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit《用兔子皮内注射法评定材料提取物的标准实施规程》.pdf

ASTM F749-2013 Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit《用兔子皮内注射法评定材料提取物的标准实施规程》.pdf

ASTM F750-1987(2007)e1 Standard Practice for Evaluating Material Extracts by Systemic Injection in the Mouse《用给老鼠有系统注射评定药物材料浸渍物》.pdf

ASTM F750-1987(2012) Standard Practice for Evaluating Material Extracts by Systemic Injection in the Mouse《用老鼠系统注射法评定材料提取物的标准实施规程》.pdf

ASTM F754-2000 Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Polymer Fabricated in Sheet Tube and Rod Shapes《薄片状、管状和棒状聚四氟乙烯聚合体植入物标准规范》.pdf

ASTM F754-2008 Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet Tube and Rod Shapes Fabricated from Granular Molding Powders《用颗粒成型粉末制成薄板、管及杆状的可植入聚四氟乙烯聚合物.pdf

ASTM F754-2008(2015) Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet Tube and Rod Shapes Fabricated from Granular Molding Powders《用颗粒成型粉末制成板状 管状及杆状可植入聚四.pdf

ASTM F755-1999(2005) Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants《外科植入物用多孔聚乙烯的选择》.pdf