UL 1598 CRD-2011 UL Standard for Safety Luminaires - Section Paragraph Reference 1 3(NEW) Subject Add reference to UL 8750 for LED components and subassemblies (Edition 3 Septembe.pdf

上传人:boatfragile160 文档编号:1067557 上传时间:2019-04-02 格式:PDF 页数:2 大小:11.73KB
下载 相关 举报
UL 1598 CRD-2011 UL Standard for Safety Luminaires - Section  Paragraph Reference 1 3(NEW) Subject Add reference to UL 8750 for LED components and subassemblies (Edition 3 Septembe.pdf_第1页
第1页 / 共2页
UL 1598 CRD-2011 UL Standard for Safety Luminaires - Section  Paragraph Reference 1 3(NEW) Subject Add reference to UL 8750 for LED components and subassemblies (Edition 3 Septembe.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared and published by Underwriters Laboratories Inc.(UL). It is normative for the a

2、pplicable UL Product Certification Program(s); however, it is currently notpart of the UL Standard(s) referenced below.Product Category (CCN): IFAM, IFAOStandard Number: UL 1598Edition Date: September 17, 2008Edition Number: 3Section / Paragraph Reference: 1.3(NEW)Subject: Add reference to UL 8750 f

3、or LED components and subassembliesDECISION:The Scope section of UL 1598 is revised as follows to include reference to UL 8750.(NEW) 1.3 Light emitting diode (LED) components and subassemblies integral to a luminaire covered bythis standard shall comply with the applicable requirements of the Standa

4、rd for Light Emitting Diode (LED)Equipment for Use in Lighting Products, UL 8750.RATIONALE FOR DECISION:The requirements applicable to LED components and subassemblies (drivers, control modules, LEDpackages, arrays) are published in the Standard for Light Emitting Diode (LED) Equipment for Use inLig

5、hting Products, UL 8750. Reference to UL 8750 in the Scope section of UL 1598 documents currentpractice.Copyright 2011 Underwriters Laboratories Inc.UL, in performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification Requirement Decisions

6、it may issue or that they will be recognized or adoptedby anyone. Certification Requirement Decisions are the opinion of Underwriters Laboratories Inc. inpractically applying the requirements of the standard. They do not represent formal interpretations of thestandard under American National Standar

7、ds Institute (ANSI) processes. UL shall not be responsible toanyone for the use of or reliance upon Certification Requirement Decisions by anyone. UL shall not incurany obligation or liability for damages, including consequential damages, arising out of or in connectionwith the use or reliance upon

8、Certification Requirement Decisions. The electronic version of theCertification Requirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULSTANDARD NUMBER: UL 1598 -2-No Text on This Page

展开阅读全文
相关资源
猜你喜欢
  • GOST 20087-1974 Iron pattern plates for moulding boxes having inside dimensions 1200x1000 mm for moulding foundry machines without turn of half mould without squeezing Design and d.pdf GOST 20087-1974 Iron pattern plates for moulding boxes having inside dimensions 1200x1000 mm for moulding foundry machines without turn of half mould without squeezing Design and d.pdf
  • GOST 20089-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm for moulding foundry machines without turn of half mould wi.pdf GOST 20089-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm for moulding foundry machines without turn of half mould wi.pdf
  • GOST 20091-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines without turn of half mould wi.pdf GOST 20091-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines without turn of half mould wi.pdf
  • GOST 20093-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines without turn of half mould w.pdf GOST 20093-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines without turn of half mould w.pdf
  • GOST 20094-1974 Iron pattern plates for moulding boxes having inside dimensions 600x500 mm 800x700 mm 1000x800 mm for moulding foundry machines with turn of half mould with squeezi.pdf GOST 20094-1974 Iron pattern plates for moulding boxes having inside dimensions 600x500 mm 800x700 mm 1000x800 mm for moulding foundry machines with turn of half mould with squeezi.pdf
  • GOST 20095-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm 800x700 mm 1000x800 mm moulding foundry machines with turn sion.pdf GOST 20095-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm 800x700 mm 1000x800 mm moulding foundry machines with turn sion.pdf
  • GOST 20096-1974 Iron pattern plates for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould without squeezing Design and dimens.pdf GOST 20096-1974 Iron pattern plates for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould without squeezing Design and dimens.pdf
  • GOST 20097-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould with .pdf GOST 20097-1974 Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould with .pdf
  • GOST 20098-1974 Iron pattern plates for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines with turn of half mould with squeezing Design and dimensio.pdf GOST 20098-1974 Iron pattern plates for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines with turn of half mould with squeezing Design and dimensio.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1