UL 224 CRD-2017 UL Standard for Safety Extruded Insulating Tubing Section Paragraph Reference (New) Section 5 A and Clause 5 A 1 Subject (Edition 6 March 6 2006).pdf

上传人:confusegate185 文档编号:1067873 上传时间:2019-04-02 格式:PDF 页数:2 大小:27.96KB
下载 相关 举报
UL 224 CRD-2017 UL Standard for Safety Extruded Insulating Tubing Section  Paragraph Reference (New) Section 5 A and Clause 5 A 1 Subject (Edition 6 March 6 2006).pdf_第1页
第1页 / 共2页
UL 224 CRD-2017 UL Standard for Safety Extruded Insulating Tubing Section  Paragraph Reference (New) Section 5 A and Clause 5 A 1 Subject (Edition 6 March 6 2006).pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared by UL LLC. It is normative for the applicable ULProduct Certification Program(

2、s); however, it is currently not part of the UL Standard(s) referencedbelow.Product Category (CCN): YDPU2/8, YDQS2, YDTU2 and YDSW2Standard Number: UL 224Standard Title: Standard for Extruded Insulating TubingEdition Date: March 6, 2006Edition Number: 6Section / Paragraph Reference: (New) Section 5.

3、A and Clause 5.A.1Subject:DECISION:New Section 5.A and Clause 5.A.15.A Pre-Conditioning and Test Conditions5.A.1 Unless otherwise specified all testing, except flammability, shall be conducted at 235C (739F)and a relative humidity of 5010% RH. Flammability testing shall be conducted in still air at

4、a temperatureof 15 35C (59 95F) and a relative humidity of 75%. All samples shall be preconditioned at 235C(739F) and a relative humidity of 5010% for a minimum of 30 minutes prior to test.RATIONALE FOR DECISION:It has come to ULs attention that specific preconditions and test conditions are not des

5、cribed in all cases.The addition of Section 5.A and Clause 5.A.1 are intended to define these parameters.Copyright 2017 UL LLCUL LLC, in performing its functions in accordance with its objectives, does not guarantee or warrant thecorrectness of Certification Requirement Decisions it may issue or tha

6、t they will be recognized or adoptedby anyone. Certification Requirement Decisions are the opinion of UL LLC. in practically applying therequirements of the standard. They do not represent formal interpretations of the standard underAmerican National Standards Institute (ANSI) processes. UL LLC shal

7、l not be responsible to anyone forthe use of or reliance upon Certification Requirement Decisions by anyone. UL LLC shall not incur anyobligation or liability for damages, including consequential damages, arising out of or in connection withthe use or reliance upon Certification Requirement Decision

8、s. The electronic version of the CertificationRequirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULSTANDARD NUMBER: UL 224 -2-No Text on This Page

展开阅读全文
相关资源
猜你喜欢
  • JUS H B8 013-1981 Sulphuric acid and oleum for industrial u se Determination of total nitrogen content Titrimetric method after distilation《工业硫酸及发烟硫酸 氮元素测定 蒸馏后用滴定法》.pdf JUS H B8 013-1981 Sulphuric acid and oleum for industrial u se Determination of total nitrogen content Titrimetric method after distilation《工业硫酸及发烟硫酸 氮元素测定 蒸馏后用滴定法》.pdf
  • JUS H B8 014-1981 Sulphuric acid and oleum for industrial use Determination of iron content 1 10-Phenantroline pho tometric method《工业用硫酸和发烟硫酸 铁含量测定 1,10菲咯啉光度测定法》.pdf JUS H B8 014-1981 Sulphuric acid and oleum for industrial use Determination of iron content 1 10-Phenantroline pho tometric method《工业用硫酸和发烟硫酸 铁含量测定 1,10菲咯啉光度测定法》.pdf
  • JUS H B8 015-1981 Sulphuric acid for industrial u se Determination ofabsolute density Hydrometer method《工业硫酸及发烟硫酸 绝对密度测定 比重法》.pdf JUS H B8 015-1981 Sulphuric acid for industrial u se Determination ofabsolute density Hydrometer method《工业硫酸及发烟硫酸 绝对密度测定 比重法》.pdf
  • JUS H B8 016-1981 Sulphuric acid and oleum for industrial u se Determination of iron content Flame atomic absorption method《工业硫酸及发烟硫酸 铁元素测定 火焰原子吸收测定》.pdf JUS H B8 016-1981 Sulphuric acid and oleum for industrial u se Determination of iron content Flame atomic absorption method《工业硫酸及发烟硫酸 铁元素测定 火焰原子吸收测定》.pdf
  • JUS H B8 017-1981 Sutphuric acid and oleum for industrial use Determination of lead content Dithizone photometric method《工业硫酸及发烟硫酸 铅含量测定 硫腙光度测定法》.pdf JUS H B8 017-1981 Sutphuric acid and oleum for industrial use Determination of lead content Dithizone photometric method《工业硫酸及发烟硫酸 铅含量测定 硫腙光度测定法》.pdf
  • JUS H B8 018-1981 Sulphuric acid and oleum for industrial use Determination of lead content Flame atomic absorption method《工业用硫酸和发烟硫酸 铅含量测定 火焰原子吸收法》.pdf JUS H B8 018-1981 Sulphuric acid and oleum for industrial use Determination of lead content Flame atomic absorption method《工业用硫酸和发烟硫酸 铅含量测定 火焰原子吸收法》.pdf
  • JUS H B8 019-1981 Sulphuric acid and oleum for industrial u se Determination ofarsenic content Silver diethyldithiocarba- ma te photometric method《工业用硫酸和发烟硫酸 砷含量的测定 银盐法光度测定法》.pdf JUS H B8 019-1981 Sulphuric acid and oleum for industrial u se Determination ofarsenic content Silver diethyldithiocarba- ma te photometric method《工业用硫酸和发烟硫酸 砷含量的测定 银盐法光度测定法》.pdf
  • JUS H B8 027-1987 Aromatic hydrocarbons for industrial use Determination of hydrogen sulfide and su fur dioxide content《工业用芳香烃 硫化氢及二氧化硫成分测定》.pdf JUS H B8 027-1987 Aromatic hydrocarbons for industrial use Determination of hydrogen sulfide and su fur dioxide content《工业用芳香烃 硫化氢及二氧化硫成分测定》.pdf
  • JUS H B8 028-1987 Benzene and toluene for industrial use Measuremcnt of colour Pt-Co sca e Colorimetric method《工业用苯和甲苯 颜色的测定 铂 钴色卡 比色法》.pdf JUS H B8 028-1987 Benzene and toluene for industrial use Measuremcnt of colour Pt-Co sca e Colorimetric method《工业用苯和甲苯 颜色的测定 铂 钴色卡 比色法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1