UL 507 CRD-2016 UL Standard for Safety Electric Fans - Section Paragraph Reference 146 1 2 Subject (Edition 9 December 13 1999).pdf

上传人:roleaisle130 文档编号:1068247 上传时间:2019-04-02 格式:PDF 页数:2 大小:11.49KB
下载 相关 举报
UL 507 CRD-2016 UL Standard for Safety Electric Fans - Section  Paragraph Reference 146 1 2 Subject (Edition 9 December 13 1999).pdf_第1页
第1页 / 共2页
UL 507 CRD-2016 UL Standard for Safety Electric Fans - Section  Paragraph Reference 146 1 2 Subject (Edition 9 December 13 1999).pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUNDERWRITERS LABORATORIES INC. CERTIFICATION REQUIREMENT DECISIONThis Certification Requirement Decision is prepared and published by Underwriters Laboratories Inc.(UL). It is normative for the a

2、pplicable UL Product Certification Program(s); however, it is currently notpart of the UL Standard(s) referenced below.Product Category (CCN): GPWXStandard Number: UL 507Standard Title: Standard for Electric FansEdition Date: December 13, 1999Edition Number: 9Section / Paragraph Reference: 146.1.2Su

3、bject:DECISION:Add the following new clause after 146.1.1:146.1.2 With reference to 146.1.1, leads provided for power-supply connection of a downdraft fan may bebrought out through factory-attached flexible conduit no more than 6 ft (1.80 m) long. An outlet box orconduit fitting shall be provided at

4、 the free end of the conduit, or the conductor insulation at the free endof the conduit shall be protected from the sharp edges of the conduit during shipping by means of a tapewrap, a fiber bushing secured in place, or the equivalent.RATIONALE FOR DECISION:Downdraft fans are generally installed in

5、kitchen base cabinets. Counter-mounted cooking units have asimilar installation position as well as similar electrical wiring needs as down-draft fans. The Standard ForSafety For Household Electric Ranges, UL 858 has provisions for power-supply connection by afactory-provided conduit whip. Based on

6、similarity in the installation of these two types of appliances, thisCertification Requirement Decision clarifies the allowance to use a conduit whip for down-draft fans.Copyright 2016 Underwriters Laboratories Inc.UL, in performing its functions in accordance with its objectives, does not guarantee

7、 or warrant thecorrectness of Certification Requirement Decisions it may issue or that they will be recognized or adoptedby anyone. Certification Requirement Decisions are the opinion of Underwriters Laboratories Inc. inpractically applying the requirements of the standard. They do not represent for

8、mal interpretations of thestandard under American National Standards Institute (ANSI) processes. UL shall not be responsible toanyone for the use of or reliance upon Certification Requirement Decisions by anyone. UL shall not incurany obligation or liability for damages, including consequential dama

9、ges, arising out of or in connectionwith the use or reliance upon Certification Requirement Decisions. The electronic version of theCertification Requirement Decision is the current version and previously printed copies may be outdated.This document is published as a service to ULs certification customersUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULSTANDARD NUMBER: UL 507 -2-No Text on This Page

展开阅读全文
相关资源
猜你喜欢
  • SAE AMS 4574E-2003 Nickel-Copper Alloy Corrosion Resistant Tubing Seamless 67Ni - 31Cu Annealed (UNS N04400)《退火的含67Ni-31Cu的镍铜合金耐腐蚀无缝管 UNS N04400》.pdf SAE AMS 4574E-2003 Nickel-Copper Alloy Corrosion Resistant Tubing Seamless 67Ni - 31Cu Annealed (UNS N04400)《退火的含67Ni-31Cu的镍铜合金耐腐蚀无缝管 UNS N04400》.pdf
  • SAE AMS 4574F-2017 Nickel-Copper Alloy Corrosion Resistant Tubing Seamless 67Ni - 31Cu Annealed (UNS N04400).pdf SAE AMS 4574F-2017 Nickel-Copper Alloy Corrosion Resistant Tubing Seamless 67Ni - 31Cu Annealed (UNS N04400).pdf
  • SAE AMS 4590C-2009 Extrusions Nickel-Aluminum Bronze Martensitic 78 5Cu C 10 5Al C 5 1Ni C 4 8Fe Quenched and Tempered (TQ50) (UNS C63020)《78 5Cu-10 5Al-5 1Ni-4 8Fe溶液热处理和淬火(TQ50)镍铝.pdf SAE AMS 4590C-2009 Extrusions Nickel-Aluminum Bronze Martensitic 78 5Cu C 10 5Al C 5 1Ni C 4 8Fe Quenched and Tempered (TQ50) (UNS C63020)《78 5Cu-10 5Al-5 1Ni-4 8Fe溶液热处理和淬火(TQ50)镍铝.pdf
  • SAE AMS 4595-2011 Copper Nickel Tin Alloy Plate 77Cu C 15Ni C 8Sn Solution Annealed and Spinodal Hardened (TX 00) (UNS C72900)《固溶退火和亚稳态硬化工艺制备的77Cu-15Ni-8Sn铜镍锡合金板(TX 00)》.pdf SAE AMS 4595-2011 Copper Nickel Tin Alloy Plate 77Cu C 15Ni C 8Sn Solution Annealed and Spinodal Hardened (TX 00) (UNS C72900)《固溶退火和亚稳态硬化工艺制备的77Cu-15Ni-8Sn铜镍锡合金板(TX 00)》.pdf
  • SAE AMS 4596B-2010 Copper Nickel Tin Alloy Bars and Rods 77Cu C 15Ni C 8Sn Solution Annealed and Spinodal Hardened (TX 00) (UNS C72900)《固溶煅烧和调幅硬化(TX00)的77Cu15Ni8Sn铜镍锡合金条材 棒材和管材》.pdf SAE AMS 4596B-2010 Copper Nickel Tin Alloy Bars and Rods 77Cu C 15Ni C 8Sn Solution Annealed and Spinodal Hardened (TX 00) (UNS C72900)《固溶煅烧和调幅硬化(TX00)的77Cu15Ni8Sn铜镍锡合金条材 棒材和管材》.pdf
  • SAE AMS 4597A-2011 Copper-Nickel-Tin Alloy Bars and Rods 77Cu - 15Ni - 8Sn Solution Annealed Cold Finished and Spinodal Hardened (TX TS) (UNS C72900)《固溶退火 冷加工和亚稳界线淬硬(TX TS)的含77Cu 1.pdf SAE AMS 4597A-2011 Copper-Nickel-Tin Alloy Bars and Rods 77Cu - 15Ni - 8Sn Solution Annealed Cold Finished and Spinodal Hardened (TX TS) (UNS C72900)《固溶退火 冷加工和亚稳界线淬硬(TX TS)的含77Cu 1.pdf
  • SAE AMS 4598A-2012 Copper Nickel Tin Alloy Mechanical Tube 77Cu - 15Ni - 8Sn Solution Annealed and Spinodal Hardened (TX 00) (UNS C72900)《固溶退火和旋接线硬化(TX 00)77Cu 15Ni 8Sn铜镍矿锡合金机械管》.pdf SAE AMS 4598A-2012 Copper Nickel Tin Alloy Mechanical Tube 77Cu - 15Ni - 8Sn Solution Annealed and Spinodal Hardened (TX 00) (UNS C72900)《固溶退火和旋接线硬化(TX 00)77Cu 15Ni 8Sn铜镍矿锡合金机械管》.pdf
  • SAE AMS 4599-2011 Aluminum Alloy Sheet and Plate 6 3Cu - 0 30Mn - 0 06Ti - 0 10V - 0 18Zr Solution and Precipitation Heat Treated (2219 -T81 -T851)《溶解沉淀热处理工艺制备的6 3Cu-0 30Mn-0 06Ti-.pdf SAE AMS 4599-2011 Aluminum Alloy Sheet and Plate 6 3Cu - 0 30Mn - 0 06Ti - 0 10V - 0 18Zr Solution and Precipitation Heat Treated (2219 -T81 -T851)《溶解沉淀热处理工艺制备的6 3Cu-0 30Mn-0 06Ti-.pdf
  • SAE AMS 4599A-2017 Aluminum Alloy Sheet and Plate 6 3Cu - 0 30Mn - 0 06Ti - 0 10V - 0 18Zr Solution and Precipitation Heat Treated (2219 -T81 -T851) (UNS A92219).pdf SAE AMS 4599A-2017 Aluminum Alloy Sheet and Plate 6 3Cu - 0 30Mn - 0 06Ti - 0 10V - 0 18Zr Solution and Precipitation Heat Treated (2219 -T81 -T851) (UNS A92219).pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1