UNE 1-022-1986 《送货单》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

TIS 2453 3-2009 Mechanical properties of corrosion-resistant stainless-steel fasteners part 3 set screws and similar fasteners not under tensile stress《耐腐蚀不锈钢紧固件的机械性能 第3部分 紧定螺钉及类似.pdf

TIS 2453 4-2009 Mechanical properties of corrosion-resistant stainless-steel fasteners part 4 tapping screws《耐腐蚀不锈钢紧固件的机械性能 第4部分 自攻螺钉》.pdf

TIS 2454-2009 Hexagon flange bolts small series《六角法兰螺栓 小系列》.pdf

TIS 2455-2009 Cross recesses for screws《螺钉用十字槽》.pdf

TIS 2456-2009 Slotted set screws with flat point《开槽平端紧定螺钉》.pdf

TIS 2457 1-2009 Fasteners surface discontinuities part 1 bolts screws and studs for general requirements《紧固件 表面不连续性 第1部分 一般要求的螺栓 螺钉和螺柱》.pdf

TIS 2457 3-2009 Fasteners surface discontinuities part 3 bolts screws and studs for special requirements《紧固件 表面不连续性 第3部分 特殊要求的螺栓 螺钉和螺柱》.pdf

TIS 2458-2009 Pan head screws with type h or type z cross recess product grade a《H型或Z型十字槽盘头螺钉 产品等级A级》.pdf

TIS 2459 1-2009 Countersunk flat head screws (common head style) with type h or type z cross recess product grade a part 1 steel of property class 4 8《H型或Z型十字槽沉头(通用头型)螺钉 产品等级A级 第1部.pdf