1、 IEEE Recommended Practice for Shipboard Electrical Installations Systems Engineering Sponsored by the Petroleum fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relatin
2、g to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods a
3、nd services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its sta
4、ndards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own
5、 independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
6、OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
7、ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. Translations The IEEE consensus development process involves the review of documents in English only. In the event that an I
8、EEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or inferred to be t
9、he official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or her views should b
10、e considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide consulting informa
11、tion or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any responses to comm
12、ents and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has previously been addr
13、essed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary, IEEE-SA Standards
14、 Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of
15、the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights IEEE draft and
16、 approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulation, standardizat
17、ion, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. Photocopies Subject to payment of the appropriate fee, IEEE will grant users a
18、limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01
19、923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents may be supersed
20、ed at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in eff
21、ect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are c
22、autioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieeexplore.ieee.o
23、rg/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website at the fol
24、lowing URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this stan
25、dard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at http:/s
26、tandards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfair discri
27、mination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity
28、or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the va
29、lidity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. Copyright 2015 IEEE. All rights reserved. vi Participants At the time this IEEE recommended practice was completed,
30、 the Electrical Installations on Shipboards Working Group had the following membership: Dwight Alexander, Chair Norbert Doerry, Vice Chair John Amy Dushan Boroyevich Terry Ericsen Omar Farique Lyndsay Garrett Herb Ginn Nari Hingorani Akhter Hossain Moni Islam Boris Jacobson Yuri Khersonsky Steven Ly
31、 Mike Roa Donald Schmucker Cali Schoder Zareh Soghomanian Michael Steurer Joseph Sullivan Albert Tucker Fred Wang The following members of the individual balloting committee voted on this recommended practice. Balloters may have voted for approval, disapproval, or abstention. William Ackerman John A
32、my Tirloch Bhat Thomas Bishop Bill Brown Carl Bush William Bush William Byrd Paul Cardinal Weijen Chen Keith Chow Davide de Luca Norbert Doerry Gary Donner Neal Dowling Donald Dunn Keith Flowers J. Travis Griffith Randall Groves Chris Heron Lee Herron Werner Hoelzl Shahid Jamil Ben C. Johnson Piotr
33、Karocki Yuri Khersonsky Robert Konnik Michael Lauxman George Cristian Lazaroiu Steven Liggio Arturo Maldonado William McBride John Merando Daleep Mohla Dennis Neitzel Michael Newman Richard Paes Sergio Panetta Joseph Piff Iulian Profir Vincent Saporita Robert Seitz Nikunj Shah Michael Steurer Kennet
34、h White James Wolfe Copyright 2015 IEEE. All rights reserved. vii When the IEEE-SA Standards Board approved this recommended practice on 11 June 2015, it had the following membership: John D. Kulick, Chair Jon Walter Rosdahl, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios, Secreta
35、ry Masayuki Ariyoshi Ted Burse Stephen Dukes Jean-Philippe Faure J. Travis Griffith Gary Hoffman Michael Janezic Joseph L. Koepfinger* David J. Law Hung Ling Andrew Myles T. W. Olsen Glenn Parsons Ronald C. Petersen Annette D. Reilly Stephen J. Shellhammer Adrian P. Stephens Yatin Trivedi Phillip Wi
36、nston Don Wright Yu Yuan Daidi Zhong *Member Emeritus Catherine Berger IEEE-SA Content Production and Management Lisa Perry IEEE-SA Technical Program Operations Special recognition is given to Paul Bishop, the former chair and founder of IEEE P45.3 who actively participated in the working group unti
37、l his untimely death in December 2014. Copyright 2015 IEEE. All rights reserved. viii Introduction This introduction is not part of IEEE Std 45.3-2015, IEEE Recommended Practice for Shipboard Electrical InstallationsSystems Engineering. The IEEE 45 Series comprises nine recommended practices address
38、ing electrical installations on ships and marine platforms. IEEE Std 45.3 provides the recommended practice for electrical power systems integration and is intended for use with the IEEE 45 series of documents. The topics covered in this document should be considered from the beginning of the projec
39、t and throughout the design and construction processes and thereby should facilitate the integration of electrical power systems at the shipyard level. Adherence to the IEEE 45.3 electrical power systems integration process provides an effective set of integration requirements and identifies key iss
40、ues and recommended solutions or options. Previous editions of IEEE Std 45 were developed as single documents addressing all areas. On 9 June 2005, a project authorization request (PAR) for the revision of IEEE Std 45-2002 was approved, and the revision of IEEE Std 45 as a single document began. It
41、soon became apparent that attempting to cover all issues in a single document would produce a very large document that would be difficult to ballot due to the wide range of issues needing to be addressed. In September 2008 it was decided that the revision of IEEE Std 45 should be developed as a base
42、 document with separate documents addressing specific areas. On 10 December 2008, separate PARs were approved for seven recommended practices. Additional PARs were approved on 11 September 2009 for switchboards and 9 December 2009 for cable systems, and the total number of standards in the IEEE Std
43、45 Series increased to nine: IEEE Std 45, IEEE Recommended Practice for Electrical Installations on Shipboard B20a, b IEEE P45.1, Draft Recommended Practice for Electrical Installations on ShipboardDetailed Design B11 IEEE Std 45.2, IEEE Recommended Practice for Electrical Installations on Shipboard
44、Controls and Automation B21 IEEE Std 45.3, IEEE Recommended Practice for Shipboard Electrical InstallationsSystems Engineering (this document) IEEE P45.4, Draft Recommended Practice for Electrical Installations on ShipboardMarine Sectors and Mission Systems B12 IEEE Std 45.5, IEEE Recommended Practi
45、ce for Electrical Installations on ShipboardSafety Considerations B22 IEEE P45.6, Draft Recommended Practice for Electrical Installations on ShipboardElectrical Testing B13 IEEE Std 45.7, IEEE Recommended Practice for Electrical Installations on ShipboardAC Switchboards B23 IEEE P45.8, Draft Recomme
46、nded Practice for Electrical Installations on ShipboardCable Systems B14 Several other IEEE standards have been developed to support the IEEE 45 Series: IEEE Std 1580-2010, IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Platforms B31 IEEE P1580.1, Draft Recomme
47、nded Practice for Insulated Bus Pipe for Use on Shipboard and Fixed or Floating Platforms B15 IEEE Std 1662-2008, IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships B32 aNumbers in brackets correspond to the numbers in the bibliography in Annex F. bTh
48、e IEEE standards or produced referred to in this introduction are trademarks of The Institute of Electrical and Electronics Engineers, Inc. Copyright 2015 IEEE. All rights reserved. ix IEEE Std 1709-2010, IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships B33 IEEE S
49、td 1826-2012, IEEE Standard for Power Electronics Open System Interfaces in Zonal Electrical Distribution Systems Rated Above 100 kWc IEC/ISO/IEEE 80005-1, Edition 1.0 2012-07, International Standard for Utility connections in portPart 1: High Voltage Shore Connection (HVSC) SystemsGeneral requirements B10 This document provides the recommended practice for integration of electrical power systems aboard ship. cInformation on normative references can be found in Clause 2. Copyright 2015 IEEE. All r
