UNE 28 002 h11 《航空术语 支撑元件的形式和处理》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM M 4322-1985 Sets of taps sets of 2 taps for pipe threads G- i6 to G4 and Rp- w to Rp4《丝锥集合 管螺纹 G1 16 至 G4 和 Rp1 16 至 Rp4 的两部分组成的丝锥集合》.pdf

ONORM M 4325-1985 Machine taps for metric ISO coarse threads M1 6 to M68《公制ISO 粗螺纹Ml 6 至 M68的机用丝锥》.pdf

ONORM M 4326-1986 Machine taps for flne pitch metric ISO-fine threads Ml 6 to M52《小螺距公制 ISO 细螺纹Ml 6 至 M52的机用丝锥》.pdf

ONORM M 4327-1985 Machine taps with reinforced shankfor metric ISO-coarse threads Ml to MIO《公制ISO 粗螺纹Ml至 MIO的钢筋轴机用丝锥》.pdf

ONORM M 4328-1985 Machine taps for pipe threads G- 6 to G2 and Rp VK to Rp 2《管子螺纹G- 6至 G2和Rp VK至 Rp 2的机用丝锥》.pdf

ONORM M 4329-1986 Nut taps with metric ISO-coarse threads M3 to M68《公制ISO 粗螺纹M3 至 M68的螺母丝锥》.pdf

ONORM M 4345-1989 Milling cutters side end face milling cutters technical specifications 《铣刀 侧端面铣刀 技术规格》.pdf

ONORM M 4350-1989 Side and face milling cutters dimensions marking of conformity《单角边面铣刀 尺寸 合格标识》.pdf

ONORM M 4358-1984 Face milling cutters for indexable inserts types and dimensions《平面铣刀刀片 类型和尺寸》.pdf