UNE 34-835-1985 《牛奶 氨基黑法进行的蛋白质含量确定（常规方法）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D723-A-2010 POLYVINYL CHLORIDE (PVC) FLEXIBLE FOAMED EXTRUSION TO BE USED WITH FORD WSS-M99P1111-A 《柔性泡沫挤压聚氯乙烯（PVC） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D724-A4-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED MOLDING COMPOUND 20% GLASS FIBER REINFORCED BLEND WITH 10% MAXIMUM PMMA REGRIND AND 20% MAXIMUM REC-M.pdf

FORD WSB-M4D732-A3-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D732-A4-2013 POLYPROPYLENE (PP) HOMOPOLYMER GLASS FIBER MICA REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D733-A3-2010 ETHYLENE VINYL ACETATE (E VAC) COPOLYMER MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部乙烯醋酸乙烯酯(E VAC)共聚物模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D733-A4-2010 ETHYLENE VINYL ACETATE (E VAC) COPOLYMER MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部乙烯醋酸乙烯酯(E VAC)共聚物模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D734-A-2005 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND PAINTED APPLICATIONS TO BE USED WITH FORD WSS-M99P1111-A 《涂漆用途用热塑性聚烯径（TEO）弹性体成型料 与标准FORD WSS-M99.pdf

FORD WSB-M4D735-A-2010 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 15% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的热塑性聚氨酯弹性体(TPU)成型料 与标.pdf

FORD WSB-M4D738-A-2009 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 30% MINERAL GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%矿物 玻璃纤维增强的热塑性聚氨酯弹性体(.pdf