UNE 38-053-1990 《铝和铝合金的挤压轮廓 不同侧面角度的轮廓 测量和允差》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SMS 713-1966 Symbols for indications appearing on machine tools《机床标记用符号》.pdf

SIS SMS 714-1963 《带碳化物芯和圆孔的拉模板》.pdf

SIS SMS 715-1968 《无容差标示的尺寸的容许偏差》.pdf

SIS SMS 716-1958 《渐开式花键 建议尺寸》.pdf

SIS SMS 717-1959 《固定零件，钻孔，综观程序》.pdf

SIS SMS 718-1959 《固定细节，钻孔，固定钻孔》.pdf

SIS SMS 719-1959 《固定零件，钻孔，有凸缘固定钻孔》.pdf

SIS SMS 720-1959 《固定零件 打孔器壳 转化壳》.pdf

SIS SMS 721-1959 《固定零件 钻孔 交换关闭螺丝》.pdf