UNE 58-101 Pt 4-1992 Heavy lifting equipment Strenght and safety conditions for dismountable tower cranes for building works Part 4 Useful life《重型可拆卸塔式起重机的安全及抗性条件 第4部分：起重机的使用寿命》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN ISO 2905-1993 Modular units for machine tool construction Spindle noses and adjustable adaptors for multi-spindle heads《组合机床通用部件 多轴头用轴头主轴端及可调适配器》.pdf

CSN ISO 2912-1993 Modular units for machine tool construction Multi-spindle heads Casing and input drive shaft dimensions《组合机床通用部件 多轴头 套管及输出传动轴尺寸》.pdf

CSN ISO 2934-1991 Modular units for machine tool construction Wing base for columns《组合机床通用部件 柱的翼基座》.pdf

CSN ISO 2972-1993 Numerical control of machines - Symbols《机床数控 符号》.pdf

CSN ISO 298-1993 Machine tools - Lathe centres - Sizes for interchangeability《机床 车床顶尖 互换性尺寸》.pdf

CSN ISO 3002-3-1994 Basic quantities in cutting and grinding - Part 3 Geometric and kinematic quantities in cutting《切割及研磨基本量 第3部分：切割中的几何及运动学量》.pdf

CSN ISO 3002-4-1994 Basic quantities in cutting and grinding Part 4 Forces energy power《切割及研磨基本量 第4部分：力量；能源；电力》.pdf

CSN ISO 3002-5-1994 Basic quantites in cutting and grinding - Part 5 Basic terminology for grinding processes using grinding wheels《切割和研磨中的基本量 第5部分：使用砂轮研磨加工的基本术语》.pdf

CSN ISO 3036-1994 Board - Determination of puncture resistance《仪表板 穿刺阻力测定》.pdf