1、 IEC 60601-1-10 Edition 1.1 2013-11 CONSOLIDATED VERSION VERSION CONSOLIDE Medical electrical equipment Part 1-10: General requirements for basic safety and essential performance Collateral Standard: Requirements for the development of physiologic closed-loop controllers Appareils lectromdicaux Part
2、ie 1-10: Exigences gnrales pour la scurit de base et les performances essentielles Norme collatrale: Exigences pour le dveloppement des rgulateurs physiologiques en boucle ferme IEC60601-1-10:2007+A1:2013 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All
3、 rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the r
4、equester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune par
5、tie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyrig
6、ht de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Sw
7、itzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is k
8、ept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference n
9、umber, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a mont
10、h by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary
11、IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation
12、mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente
13、 un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les pro
14、jets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedi
15、a.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne.
16、Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60601-1-10 Edition 1.1 2013-11 INTERNATIONAL STANDARD VERSION CONSOLIDE Medical electrical equipment Part 1-10: General requirements fo
17、r basic safety and essential performance Collateral Standard: Requirements for the development of physiologic closed-loop controllers Appareils lectromdicaux Partie 1-10: Exigences gnrales pour la scurit de base et les performances essentielles Norme collatrale: Exigences pour le dveloppement des rg
18、ulateurs physiologiques en boucle ferme INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 11.040 ISBN 978-2-8322-1286-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning!
19、Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinsideIEC 60601-1-10 Edition 1.1 2013-11 REDLINE VERSION VERSION REDLINE Medical electrical equipment Part 1-10: General
20、 requirements for basic safety and essential performance Collateral Standard: Requirements for the development of physiologic closed-loop controllers Appareils lectromdicaux Partie 1-10: Exigences gnrales pour la scurit de base et les performances essentielles Norme collatrale: Exigences pour le dve
21、loppement des rgulateurs physiologiques en boucle ferme IEC60601-1-10:2007+A1:2013 colourinside 2 60601-1-10 IEC:2007+A1:2013 CONTENTS FOREWORD . 4 INTRODUCTION . 7 INTRODUCTION TO THE AMENDMENT 8 1 Scope, object and related standards . 9 1.1 * Scope . 9 1.2 Object . 9 1.3 Related standards . 9 1.3.
22、1 IEC 60601-1 9 1.3.2 Particular standards 10 2 Normative references . 10 3 Terms and definitions . 10 4 * General requirements 15 5 ME EQUIPMENT identification, marking and documents . 16 5.1 * Instructions for use . 16 5.2 Technical description. 16 6 Accuracy of controls and instruments and protec
23、tion against hazardous outputs 16 6.1 * USABILITY 16 6.2 ALARM SYSTEMS . 16 6.3 * PCLCS VARIABLE logging 17 6.4 * DISTRIBUTED PCLCS 17 7 * PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS) 17 8 Requirements for PHYSIOLOGIC CLOSED-LOOP CONTROLLER (PCLC) development 17 8.1 * General . 17 8.2 Attributes/a
24、ctivities of the PCLC development PROCESS . 18 8.2.1 RECORDS and PROCESS scaling 18 8.2.2 Equipment specifications . 18 8.2.3 * Disturbance management 21 8.2.4 * PCLC VERIFICATION . 22 8.2.5 * PCLCS VALIDATION 22 Annex A (informative) General guidance and rationale . 23 Annex B (informative) Descrip
25、tion of dynamic performance of a PCLCS 33 Annex C (informative) Guide to marking and labelling requirements for ME EQUIPMENT and ME SYSTEMS 37 Bibliography 38 Index of defined terms used in this collateral standard 39 Figure 1 Functional diagram indicating typical components of a PHYSIOLOGIC CLOSED-
26、LOOP CONTROL SYSTEM (PCLCS) utilizing a PCLC 11 Figure B.1 Example of PCLCS dynamic performance with no STEADY-STATE DEVIATION 34 Figure B.2 Example of PCLCS dynamic performance with STEADY-STATE DEVIATION . 35 60601-1-10 IEC:2007+A1:2013 3 Figure B.3 Example of PCLCS dynamic performance transient C
27、OMMAND VARIABLE 36 Table A.1 Examples of ME EQUIPMENT or ME SYSTEMS that incorporate a PCLCS . 23 Table C.2 ACCOMPANYING DOCUMENTS, instructions for use 37 Table C.3 ACCOMPANYING DOCUMENTS, technical description 37 4 60601-1-10 IEC:2007+A1:2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MEDICAL ELE
28、CTRICAL EQUIPMENT Part 1-10: General requirements for basic safety and essential performance Collateral Standard: Requirements for the development of physiologic closed-loop controllers FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization co
29、mprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International St
30、andards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this pr
31、eparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two orga
32、nizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form
33、 of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretat
34、ion by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or reg
35、ional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this pu
36、blication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirec
37、t, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the c
38、orrect application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. This Consolidated version of IEC 60601-1-10 bears t
39、he edition number 1.1. It consists of the first edition (2007) documents 62A/576/FDIS and 62A/585/RVD and its amendment 1 (2013) documents 62A/888/FDIS and 62A/896/RVD. The technical content is identical to the base edition and its amendment. In this Redline version, a vertical line in the margin sh
40、ows where the technical content is modified by amendment 1. Additions and deletions are displayed in red, with deletions being struck through. A separate Final version with all changes accepted is available in this publication. This publication has been prepared for user convenience. 60601-1-10 IEC:
41、2007+A1:2013 5 International standard IEC 60601-1-10 has been prepared by IEC subcommittee 62A: Common aspects of electrical equipment used in medical practice, of IEC technical committee 62: Electrical equipment in medical practice, and ISO subcommittees SC1: Breathing attachments and anaesthetic m
42、achines, and SC3: Lung ventilators and related devices of ISO technical committee 121: Anaesthetic and respiratory equipment. It is published as double logo standard. This first edition constitutes a collateral standard to IEC 60601-1: Medical electrical equipment Part 1: General requirements for sa
43、fety and essential performance hereafter referred to as the general standard. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In the 60601 series of publications, collateral standards specify general requirements for safety applicable to: a subgroup of MEDICAL EL
44、ECTRICAL EQUIPMENT (e.g. radiological equipment); or a specific characteristic of all MEDICAL ELECTRICAL EQUIPMENT, not fully addressed in the general standard (e.g. ALARM SYSTEMS). In this collateral standard, the following print types are used: requirements and definitions: roman type. test specif
45、ications: italic type. informative material appearing outside of tables, such as notes, examples and references: in smaller type. Normative text of tables is also in a smaller type. TERMS DEFINED IN CLAUSE 3 OF THE GENERAL STANDARD, IN THIS COLLATERAL STANDARD OR AS NOTED: SMALL CAPITALS. In referri
46、ng to the structure of this standard, the term “clause” means one of the eight numbered divisions within the table of contents, inclusive of all subdivisions (e.g. Clause 8 includes Subclauses 8.1, 8.2, etc.); “subclause” means a numbered subdivision of a clause (e.g. 8.1, 8.2 and 8.2.1 are all subc
47、lauses of Clause 8). References to clauses within this standard are preceded by the term “Clause” followed by the clause number. References to subclauses within this standard are by number only. In this standard, the conjunctive “or” is used as an “inclusive or” so a statement is true if any combina
48、tion of the conditions is true. The verbal forms used in this standard conform to usage described in Annex H of the ISO/IEC Directives, Part 2. For the purposes of this standard, the auxiliary verb: “shall” means that compliance with a requirement or a test is mandatory for compliance with this stan
49、dard; “should” means that compliance with a requirement or a test is recommended but is not mandatory for compliance with this standard; “may” is used to describe a permissible way to achieve compliance with a requirement or test. Clauses, subclauses and definitions for which a rationale is provided in informative Annex A are marked with an asterisk (*). 6 60601-1-10 IEC:2007+A1:
