1、 IEC 61189-5-1 Edition 1.0 2016-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-1: General test methods for materials and assemblies Guidance for printed board assemblies Mthodes dessai po
2、ur les matriaux lectriques, les cartes imprimes et autres structures dinterconnexion et ensembles Partie 5-1: Mthodes dessai gnrales pour les matriaux et les assemblages Lignes directrices pour les assemblages de cartes circuit imprim IEC 61189-5-1:2016-07(en-fr) THIS PUBLICATION IS COPYRIGHT PROTEC
3、TED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs me
4、mber National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproductio
5、n rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur
6、. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 91
7、9 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The tec
8、hnical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical info
9、rmation on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number,
10、 text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by em
11、ail. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online.
12、IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service
13、Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des
14、Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoi
15、r t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherch
16、e de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.i
17、ec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il cont
18、ient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en f
19、ranais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si v
20、ous avez des questions contactez-nous: csciec.ch. IEC 61189-5-1 Edition 1.0 2016-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Test methods for electrical materials, printed boards and other interconnection structures and assemblies Part 5-1: General test methods for materials and assemblies Guidan
21、ce for printed board assemblies Mthodes dessai pour les matriaux lectriques, les cartes imprimes et autres structures dinterconnexion et ensembles Partie 5-1: Mthodes dessai gnrales pour les matriaux et les assemblages Lignes directrices pour les assemblages de cartes circuit imprim INTERNATIONAL EL
22、ECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 31.180 ISBN 978-2-8322-3506-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an aut
23、horized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61189-5-1:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references. 8 3 Accuracy, precision and resolution . 8 3.1 General . 8 3.2 Accuracy . 8 3.3
24、 Precision . 9 3.4 Resolution. 10 3.5 Report 10 3.6 Students t distribution . 10 3.7 Suggested uncertainty limits 11 4 Catalogue of approved test methods 12 5 List of contents of the IEC 61189-5 series 12 Annex A (informative) Tests . 13 Annex B (informative) Guidance documents and handbooks . 15 B.
25、1 General . 15 B.2 Handbook and guide to supplement IPC-J-STD-001 . 15 B.3 Guidelines for Electrically Conductive Surface Mount Adhesives (IPC-3406) . 15 B.4 Users Guide for Cleanliness of Unpopulated Printed Boards (IPC-5701) . 15 B.5 Guidelines for OEMs in Determining Acceptable Levels of Cleanlin
26、ess of Unpopulated Printed Boards (IPC-5702) 15 B.6 Surface Insulation Resistance Handbook (IPC-9201) . 16 B.7 Material and Process Characterisation / Qualification Test Protocol for Assessing Electrochemical Performance (IPC-9202) 16 B.8 User Guide for the IPC/IEC B52 Process Qualification Test Veh
27、icle (IPC-9203) 16 B.9 PWB Assembly Soldering Process Guideline for Electronic Components (IPC-9502) 16 B.10 Aqueous Post Solder Cleaning Handbook (IPC-AC-62A) 17 B.11 Guidelines for Cleaning of Printed Boards and Assemblies (IPC-CH-65A) . 17 B.12 Handbook (IPC-J-STD-005) . 17 B.13 Acceptability of
28、Electronic Assemblies (IPC-HDBK-610) . 18 B.14 Guidelines for Design, Selection and Application of Conformal Coatings (IPC-HDBK-830) . 18 B.15 Solder mask Handbook (IPC-HDBK-840) . 18 B.16 Guidelines and Requirements for Electrical Testing of Unpopulated Printed Boards (IPC-9252) 19 B.17 In-Process
29、DPMO and Estimated Yield for PCAs (IPC-9261A) 19 B.18 Assembly Soldering Process Guideline for Electronic Components (IPC-9502 PWB) . 20 B.19 Users Guide for IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation (IPC-9631) 20 B.20 High Temperature Printed Board Flatness Gu
30、ideline (IPC-9641) 20 B.21 User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing) (IPC-9691A) 21 IEC 61189-5-1:2016 IEC 2016 3 B.22 Mechanical Shock Test Guidelines for Solder Joint Reliability (IPC-JEDEC- 9703) 21 B.23 Prin
31、ted Circuit Assembly Strain Gage Test Guideline (IPC-JEDEC-9704A) . 22 Bibliography . 23 Table 1 Students t distribution . 11 Table A.1 General test methods for materials and assemblies . 13 4 IEC 61189-5-1:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ TEST METHODS FOR ELECTRICAL MATERIA
32、LS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES Part 5-1: General test methods for materials and assemblies Guidance for printed board assemblies FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all nati
33、onal electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technica
34、l Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. I
35、nternational, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) Th
36、e formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendati
37、ons for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end u
38、ser. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publicatio
39、n shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent
40、certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any persona
41、l injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative refere
42、nces cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for i
43、dentifying any or all such patent rights. International Standard IEC 61189-5-1 has been prepared by IEC technical committee 91: Electronics assembly technology. The text of this standard is based on the following documents: CDV Report on voting 91/1273/CDV 91/1354/RVC Full information on the voting
44、for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 61189-5-1:2016 IEC 2016 5 A list of all parts in the IEC 61189 series, published under the general title Test
45、methods for electrical materials, printed boards and other interconnection structures and assemblies, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec
46、.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 IEC 61189-5-1:2016 IEC 2016 INTRODUCTION IEC 61189 relates to test methods for printed boards and printed board assemblies, as well as rela
47、ted materials or component robustness, irrespective of their method of manufacture. The standard is divided into separate parts, covering information for the designer and the test methodology engineer or technician. Each part has a specific focus. Methods are grouped according to their application a
48、nd numbered sequentially as they are developed and released. In some instances test methods developed by other technical committees (for example, TC 104) have been reproduced from existing IEC standards in order to provide the reader with a comprehensive set of test methods. When this situation occu
49、rs, it will be noted on the specific test method. If the test method is reproduced with minor revisions, those paragraphs that are different are identified. This part of IEC 61189 contains test methods for evaluating printed board assemblies as well as materials used in the manufacture of electronic assemblies. The methods are self- contained, with sufficient detail and description so as to achieve uni
