1、 IEC 61196-11 Edition 1.0 2016-01 INTERNATIONAL STANDARD Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric IEC 61196-11:2016-01(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved.
2、 Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you
3、have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1
4、211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical conte
5、nt of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on I
6、EC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, techn
7、ical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electro
8、pedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary
9、 - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - web
10、store.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC61196-11 Edition 1.0 2016-01 INTERNATIONAL STANDARD Coaxial communication cables Part 11: Sectional specification for semi-rigid cables with
11、 polyethylene (PE) dielectric INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.120.10 ISBN 978-2-8322-3091-6 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 61196-11:2016 IEC 2016 CONTEN
12、TS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 7 4 Materials and cable construction . 7 4.1 Cable construction 7 4.2 Inner conductor . 7 4.2.1 Conductor material 7 4.2.2 Conductor construction 7 4.3 Dielectric 8 4.4 Outer conductor 8 4.5 Sheath 8 5 Standard rating and cha
13、racteristics 9 5.1 Nominal characteristic wave impedance 9 5.2 Rated temperature range 9 5.3 Operating frequency . 9 5.4 Average and peak power 9 6 Identification, marking and labelling . 9 6.1 Cable identification . 9 6.2 Cable marking . 9 6.3 Labelling . 9 7 Requirements of finished cables 9 7.1 G
14、eneral . 9 7.2 Electrical requirements . 10 7.3 Environmental requirements . 11 7.4 Mechanical requirements 12 7.5 Fire performance requirements . 13 8 Quality assessment . 13 9 Delivery and storage 13 Table 1 Rated temperature 9 Table 2 Electrical requirements 10 Table 3 Environmental requirements
15、11 Table 4 Mechanical requirements. 12 Table 5 Fire performance requirements 13 IEC 61196-11:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COAXIAL COMMUNICATION CABLES Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric FOREWORD 1) The International
16、 Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fi
17、elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any I
18、EC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardiz
19、ation (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has represe
20、ntation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC c
21、annot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publicat
22、ions. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas,
23、access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including
24、individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance u
25、pon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the element
26、s of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61196-11 has been prepared by subcommittee 46A: Coaxial cables, of IEC technical committee 46: Cables, wires, waveguides, R.F. co
27、nnectors, R.F. and microwave passive components and accessories. The text of this standard is based on the following documents: FDIS Report on voting 46A/1280/FDIS 46A/1291/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the abov
28、e table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 61196-11:2016 IEC 2016 It is to be read in conjunction with IEC 61196-1:2005, on which it is based. A list of all parts in the IEC 61196 series, under the general title: Coaxial communication cables,
29、can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirme
30、d, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC 61196-11:2016 IEC 2016 5 COAXIAL COMMUNICATION CABLES Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric 1 Scope This part of IEC
31、61196 applies to semi-rigid coaxial communication cables with polyethylene (PE) dielectric and tubular outer conductor. These cables are intended for use in microwave and wireless equipments or other signal transmission equipments or units at frequencies above 500 MHz. 2 Normative references The fol
32、lowing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-1:20
33、13, Environmental testing Part 1: General and guidance IEC 60096-0-1:2012, Radio frequency cables Part 1- 0: Guide to the design of detail specifications Section 1 Coaxial cables IEC 60096-0-1:2012/ AMD1:_ 1IEC 60332-1-2, Tests on electric and optical fibre cables under fire conditions Part 1-2: Tes
34、t for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre- mixed flame IEC 60811-406:2012, Electric and optical fibre cables Test methods for non-metallic materials Part 406: Miscellaneous tests Resistance to stress cracking of polyethylene and polypropylene compou
35、nds IEC 60754-1, Test on gases evolved during combustion of materials from cables Part 1: Determination of the halogen acid gas content IEC 61034-2, Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements IEC 61169-4, Radio-frequency connectors
36、 Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock Characteristic impedance 50 (type 7-16) IEC 61196-1 (all parts), Coaxial communication cables IEC 61196-1:2005, Coaxial communication cables Part 1: Generic specification General, definitions and re
37、quirements _ 1To be published. 6 IEC 61196-11:2016 IEC 2016 IEC 61196-1-1, Coaxial communication cables Part 1-1: Capability approval for coaxial cables IEC 61196-1-101, Coaxial communication cables Part 1-101: Electrical test methods Test for conductor d.c. resistance of cable IEC 61196-1-102, Coax
38、ial communication cables Part 1-102: Electrical test methods Test for insulation resistance of cable dielectric IEC 61196-1-103, Coaxial communication cables Part 1-103: Electrical test methods Test for capacitance of cable IEC 61196-1-105, Coaxial communication cables Part 1-105: Electrical test me
39、thods Test for withstand voltage of cable dielectric IEC 61196-1-106, Coaxial communication cables Part 1-106: Electrical test methods Test for withstand voltage of cable sheath IEC 61196-1-108, Coaxial communication cables Part 1-108: Electrical test methods Test for characteristic impedance, phase
40、 and group delay, electrical length and propagation velocity IEC 61196-1-110, Coaxial communication cables Part 1-110: Electrical test methods Test for continuity IEC 61196-1-112, Coaxial communication cables Part 1-112: Electrical test methods Test for return loss IEC 61196-1-113, Coaxial communica
41、tion cables Part 1-113: Electrical test methods Test for attenuation constant IEC 61196-1-115, Coaxial communication cables Part 1-115: Electrical test methods Test for regularity of impedance (pulse/step function return loss) IEC 61196-1-119, Coaxial communication cables Part 1-119: Electrical test
42、 methods RF power rating IEC 61196-1-201:2009, Coaxial communication cables Part 1-201: Environmental test methods Test for cold bend performance of cable IEC 61196-1-203, Coaxial communication cables Part 1-203: Environmental test methods Test for water penetration of cable IEC 61196-1-206, Coaxial
43、 communication cables Part 1-206: Environmental test methods Climatic sequence IEC 61196-1-215, Coaxial communication cables Part 1-215: Environmental test methods High temperature cable ageing 2IEC 61196-1-301, Coaxial communication cables Part 1-301: Mechanical test methods Test for ovality _ 2To
44、be published. IEC 61196-11:2016 IEC 2016 7 IEC 61196-1-302, Coaxial communication cables Part 1-302: Mechanical test methods Test for eccentricity IEC 61196-1-313, Coaxial communication cables Part 1-313: Mechanical test methods Adhesion of dielectric and sheath IEC 61196-1-314, Coaxial communicatio
45、n cables Part 1-314: Mechanical test methods Test for bending IEC 61196-1-316, Coaxial communication cables Part 1-316: Mechanical test methods Test of maximum pulling force of cable IEC 61196-1-317, Coaxial communication cables Part 1-317: Mechanical test methods Test for crush resistance of cable
46、IEC TR 62222:2012, Fire performance of communication cables installed in buildings IEC 62037-4, Passive RF and microwave devices, intermodulation level measurement Part 4: Measurement of passive intermodulation in coaxial cables IEC 62153-4-3, Metallic communication cable test methods Part 4-3: Elec
47、tromagnetic compatibility (EMC) Surface transfer impedance Triaxial method IEC 62153-4-4, Metallic communication cable test methods Part 4-4: Electromagnetic compatibility (EMC) Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method IEC 62230, Electric cable
48、s Spark-test method EN 50289-4-17, Communication cables Specifications for test methods Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 61196-1 a
49、pply. 4 Materials and cable construction 4.1 Cable construction The cable construction shall be in accordance with 4.2 to 4.5 of this part of IEC 61196 and the requirements stated in the detail specification. 4.2 Inner conductor 4.2.1 Conductor material Subclause 4.4.1 of IEC 61196-1:2005 applies. The inner conductor material shall be as stated in the
