1、 IEC 61196-4 Edition 3.0 2015-09 INTERNATIONAL STANDARD Coaxial communication cables Part 4: Sectional specification for radiating cables IEC 61196-4:2015-09(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specif
2、ied, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about
3、 IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch
4、 Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications i
5、s kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standar
6、ds, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It als
7、o gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia
8、.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/
9、glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstor
10、e.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61196-4 Edition 3.0 2015-09 INTERNATIONAL STANDARD Coaxial communication cables Part 4: Sectional specification for radiating cables INTERNATIO
11、NAL ELECTROTECHNICAL COMMISSION ICS 33.120.10 ISBN 978-2-8322-2892-0 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 61196-4:2015 IEC 2015 CONTENTS FOREWORD . 4 1 Scope 6 2
12、 Normative references 6 3 Terms and definitions 8 4 Materials and cable construction . 8 4.1 Cable construction 8 4.2 Inner conductor . 8 4.2.1 Conductor material 8 4.2.2 Conductor construction 9 4.3 Dielectric 9 4.4 Outer conductor 9 4.5 Sheath 9 5 Standard rating and characteristics 10 5.1 Nominal
13、 characteristic impedance . 10 5.2 Rated temperature range 10 5.3 Operating frequency . 10 6 Identification, marking and labeling 10 6.1 Cable identification . 10 6.2 Cable marking . 10 6.3 Labelling . 10 7 Tests of finished cables . 10 7.1 General . 10 7.2 Electrical testing of the finished cable (
14、see Table 1) . 11 7.3 Environmental testing (see Table 2) . 12 7.4 Mechanical testing (see Table 3) 13 7.5 Fire performance testing (see Table 4) 14 8 Quality assessment . 14 9 Delivery and storage 14 Annex A (normative) Attenuation constant . 15 A.1 Procedure . 15 A.1.1 General . 15 A.1.2 Ground-le
15、vel method . 15 A.1.3 Free-space method 15 A.2 Measurement (see Figures A.1 and A.2) . 15 A.3 Evaluation . 15 A.4 Requirement . 16 Annex B (normative) Coupling loss (far field) . 17 B.1 Procedure . 17 B.1.1 General . 17 B.1.2 Ground-level method . 17 B.1.3 Free-space method 17 B.2 Measurement (see F
16、igures B.3 and B.4) . 18 B.3 Evaluation . 18 B.4 Requirement . 19 B.5 Test report 19 IEC 61196-4:2015 IEC 2015 3 Annex C (informative) Coupling loss around circumferential orientation of radiating cable. 21 C.1 General . 21 C.2 Definitions. 21 C.2.1 Coupling loss chart around circumferential orienta
17、tion of radiating cable (Y-Z) 21 C.2.2 Out-of roundness of coupling loss chart around circumferential orientation of radiating cable 21 C.3 Test method 21 C.4 Calculation 22 C.5 Requirements . 22 C.6 Test report 22 Annex D (under study) Radiating intensity around circumferential orientation of radia
18、ting cable 24 D.1 General . 24 D.2 Definitions. 24 D.2.1 Radiation intensity chart around circumferential orientation of radiating cable (Y-Z) 24 D.2.2 Out-of roundness of radiation intensity chart around circumferential orientation of radiating cable 24 D.3 Test method 25 D.4 Calculation 25 D.5 Req
19、uirements . 26 D.6 Test report 27 Bibliography 28 Figure A.1 Attenuation constant with ground-level method . 16 Figure A.2 Attenuation constant with free-space method 16 Figure B.1 Antenna orientations with ground-level method . 17 Figure B.2 Antenna orientations with free-space method 18 Figure B.3
20、 Coupling loss with ground-level method 20 Figure B.4 Coupling loss with free-space method . 20 Figure C.1 Example of coupling loss chart around circumferential orientation of radiating cable 22 Figure D.1 Example of testing arrangement of radiation intensity chart around circumferential orientation
21、 of radiating cable . 25 Figure D.2 Example of radiation intensity chart around circumferential orientation of radiating cable 26 Table 1 Electrical testing 11 Table 2 Environmental testing 12 Table 3 Mechanical testing 13 Table 4 Fire performance testing . 14 4 IEC 61196-4:2015 IEC 2015 INTERNATION
22、AL ELECTROTECHNICAL COMMISSION _ COAXIAL COMMUNICATION CABLES Part 4: Sectional specification for radiating cables FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committ
23、ees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Availabl
24、e Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organ
25、izations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical m
26、atters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC Nati
27、onal Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity,
28、IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC its
29、elf does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that
30、they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any natur
31、e whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced
32、publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Internationa
33、l Standard IEC 61196-4 has been prepared by subcommittee 46A: Coaxial cables, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. This third edition cancels and replaces the second edition published in 2004. This edition c
34、onstitutes a technical revision. The main changes with respect to the previous edition are as follows: a definition for coupling loss was added, Clause 4 “Materials and cable construction“ was added, rated temperature range, operating frequency and radiating characteristics as standard rating and ch
35、aracteristics were added, identification, marking and labeling was added, IEC 61196-4:2015 IEC 2015 5 the tables of test procedures were revised, quality assessment and packaging was added, Annex C, “Coupling loss around circumferential orientation of radiating cable” was added Annex D “Radiating in
36、tensity around circumferential orientation of radiating cable” was added. The text of this standard is based on the following documents: FDIS Report on voting 46A/1256/FDIS 46A/1273/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in
37、 the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This publication is to be read in conjunction with IEC 61196-1:2005. A list of all the parts in the IEC 61196 series published under the general title Coaxial communication cables can be found on t
38、he IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, rep
39、laced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Us
40、ers should therefore print this document using a colour printer. 6 IEC 61196-4:2015 IEC 2015 COAXIAL COMMUNICATION CABLES Part 4: Sectional specification for radiating cables 1 Scope This part of IEC 61196 applies to radiating coaxial communication cables. These cables are intended for use in wirele
41、ss communication systems, such as tunnels, railways, highways, subways, elevators and other installations in which conventional antenna transmission is not satisfactory or even impossible. It is to be read in conjunction with IEC 61196-1:2005. 2 Normative references The following documents, in whole
42、 or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-1:2013, Environmental testing
43、Part 1: General and guidance IEC 60068-2-61, Environmental testing Part 2-61: Test methods: Test Z/ABDM: Climatic sequence IEC 60332-1-2, Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for
44、1 kW pre- mixed flame IEC TS 60695-7-50, Fire hazard testing Part 7-50: Toxicity of fire effluent Estimation of toxic potency Apparatus and test method IEC TS 60695-7-51, Fire hazard testing Part 7-51: Toxicity of fire effluent Estimation of toxic potency: Calculation and interpretation of test resu
45、lts IEC 60754-1, Test on gases evolved during combustion of materials from cables Part 1: Determination of the halogen acid gas content IEC 60811-406, Electric and optical fibre cables Test methods for non-metallic materials Part 406: Miscellaneous tests Resistance to stress cracking of polyethylene
46、 and polypropylene compounds IEC 61034-2:2005, Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements IEC 61196-1:2005, Coaxial communication cables Part 1: Generic specification General, definitions and requirements IEC 61196-1-1, Coaxial com
47、munication cables Part 1-1: Capability approval for coaxial cables IEC 61196-4:2015 IEC 2015 7 IEC 61196-1-100, Coaxial communication cables Part 1-100: Electrical test methods General requirements IEC 61196-1-101, Coaxial communication cables Part 1-101: Electrical test methods Test for conductor d
48、.c. resistance of cable IEC 61196-1-102, Coaxial communication cables Part 1-102: Electrical test methods Test for insulation resistance of cable dielectric IEC 61196-1-103, Coaxial communication cables Part 1-103: Electrical test methods Test for capacitance of cable IEC 61196-1-105, Coaxial commun
49、ication cables Part 1-105: Electrical test methods Test for withstand voltage of cable dielectric IEC 61196-1-106, Coaxial communication cables Part 1-106: Electrical test methods Test for withstand voltage of cable sheath IEC 61196-1-108, Coaxial communication cables Part 1-108: Electrical test methods Test for characteristic impedance, phase and group delay, electrical length and propagation velocity IEC 6
