1、 IEC 61199 Edition 3.1 2012-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Single-capped fluorescent lamps Safety specifications Lampes fluorescence culot unique Spcifications de scurit IEC61199:2011+A1:2012:200X colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzer
2、land All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country
3、of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, au
4、cune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le
5、 copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoi
6、ec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publicati
7、ons is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (ref
8、erence number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also onc
9、e a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Voc
10、abulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organ
11、isation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plu
12、s rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur
13、 les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.ele
14、ctropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en
15、 ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61199 Edition 3.1 2012-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Single-capped fluorescent lamps Safety specifications Lam
16、pes fluorescence culot unique Spcifications de scurit INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CN ICS 29.140.30 PRICE CODE CODE PRIX ISBN 978-2-8322-0412-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission
17、Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinside 2 61199 IEC:2011+A1:2012 CONTENTS FOREWORD . 4 INTRODUCTION . 6 INTRODUC
18、TION TO THE AMENDMENT . 7 1 Scope . 8 2 Normative references 9 3 Terms and definitions . 9 4 Safety requirements 11 4.1 General . 11 4.2 Marking . 11 4.3 Mechanical requirements for caps 11 4.3.1 Construction and assembly 11 4.3.2 Dimensional requirements for caps 11 4.3.3 Pin connections and keying
19、 configurations . 12 4.4 Insulation resistance 12 4.5 Electric strength 12 4.6 Parts which can become accidentally live . 12 4.7 Resistance to heat and fire 13 4.8 Creepage distance for caps . 14 4.9 Lamp cap temperature rise 14 4.10 Radio interference suppression capacitors . 15 4.10.1 General . 15
20、 4.10.2 Moisture resistance 15 4.10.3 Resistance to flame and ignition . 16 4.11 UV radiation 16 4.12 Information for luminaire design . 16 4.13 Information for ballast design . 16 4.14 Information for lampholder design 16 5 Assessment 16 5.1 General . 16 5.2 Whole production assessment by means of
21、the manufacturers records . 17 5.3 Assessment of the manufacturers records of particular tests . 21 5.4 Rejection conditions of batches 21 5.5 Sampling procedures for whole production testing 22 5.6 Sampling procedures for batch testing . 22 Annex A (normative) Tests for assessing caps for construct
22、ion and assembly . 24 Annex B (normative) Maximum lamp cap temperature rise values and method of measurement 25 Annex C (informative) Information for luminaire design . 31 Annex D (normative) Conditions of compliance for design tests 33 Annex E (normative) Cathode connection configurations 34 Annex
23、F (normative) Normal and abnormal lamp operation, lamp non-interchangeability requirements . 36 Annex G (normative) Information for thermal tests 38 61199 IEC:2011+A1:2012 3 Annex H (informative) Information for ballast design . 39 Annex I (informative) Information for lampholder design . 40 Bibliog
24、raphy 42 Figure 1 Places where to measure the temperature 15 Figure B.1 Example for a test circuit for the measurement of the cap temperature rise at maximum discharge current and maximum SoS . 26 Figure B.2 Examples where to measure the temperature according to Clause B.2 . 28 Figure E.1 Where to c
25、onnect the cathodes of different caps 35 Figure G.1 Ball-pressure apparatus 38 Table 1 Sheet references of IEC 60061 8 Table 2 Grouping of test records Sampling and acceptable quality levels (AQL) . 18 Table 3 Acceptance numbers AQL = 0,65 % . 19 Table 4 Acceptance numbers AQL = 2,5 % . 20 Table 5 B
26、atch sample size and rejection number 22 Table B.1 Maximum cap temperature rise, lamps with internal or external starter (test at abnormal operating conditions) 29 Table B.2 Maximum cap temperature rise, lamps for starterless operation (test at normal operating conditions) . 30 Table C.1 Maximum cap
27、 temperature, lamps with internal or external starter (test at abnormal operating conditions) 31 Table C.2 Maximum cap temperature, lamps for starterless operation (test at normal operating conditions) . 32 Table F.1 Maximum allowable currents and rated lamp power . 37 Table G.1 Test temperatures 38
28、 Table I.1 Temperature point . 40 Table I.2 Maximum temperatures related to lampholder design . 41 4 61199 IEC:2011+A1:2012 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SINGLE-CAPPED FLUORESCENT LAMPS SAFETY SPECIFICATIONS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide
29、 organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activi
30、ties, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject d
31、ealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determin
32、ed by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committee
33、s. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which the
34、y are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication a
35、nd the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not resp
36、onsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical co
37、mmittees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publica
38、tions. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of pa
39、tent rights. IEC shall not be held responsible for identifying any or all such patent rights. This consolidated version of IEC 61199 consists of the third edition (2011) documents 34A/1468/FDIS and 34A/1493/RVD and its amendment 1 (2012) documents 34A/1538/CDV and 34A/1578/RVC. It bears the edition
40、number 3.1. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. A vertical line in the margin shows where the base publication has been modified by amendment 1. Additions and deletions are displayed in red, with deletions bei
41、ng struck through. 61199 IEC:2011+A1:2012 5 International Standard IEC 61199 has been prepared by subcommittee 34A: Lamps, of IEC technical committee 34: Lamps and related equipment. This third edition cancels and replaces the second edition published in 1999. It constitutes a technical revision. Ma
42、in technical changes are the introduction of requirements for high frequency operation, a new temperature measurement position and few new cap-holder fits. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of the base pub
43、lication and its amendments will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT T
44、he “colour inside” logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. 6 61199 IEC:2011+A1:2012 INTRODUCTION For the ease o
45、f measurement, a new location for measuring the maximum cap temperature and maximum cap temperature rise has been introduced with this third edition of this standard, resulting in new temperature values. However, the design of lampholders is based on the traditional measurement location. Therefore,
46、a new Annex I has been introduced, providing the previous methods and values for those lamp types and kinds of lamp operation, which have been already covered in the previous edition of this standard. For lamps, which are operated by means of an electronic ballast however, also a new measurement met
47、hod and temperature limits are given. Special attention has been given to the requirements related to high frequency operation, not covered in the previous edition. The standards IEC 62471,and IEC/TR 62471-2, contain horizontal requirements available that need to be introduced into product standards
48、 e.g. to IEC 61199. The horizontal requirements are transformed into requirements for single-capped fluorescent lamps. The lamps within the scope of this standard are general lighting service (GLS) lamps according to the definition 3.11 of IEC 62471;2006. “.lamps intended for lighting spaces that a
49、re typically occupied or viewed by people.“ According to Clause 6 of IEC 62471:2006, radiation of GLS lamps is measured at a distance equivalent to 500 lx. Measured at the 500 lx distance, GLS lamps will not exceed risk group 1 for blue light hazard and risk group 0 for IR radiation. This combination of risk group and hazard does not require marking (Table 1 of IEC/TR 62471-2:2009). Hazards from UV radi
