1、 IEC 61691-6 Edition 1.0 2009-12 INTERNATIONAL STANDARD Behavioural languages Part 6: VHDL Analog and Mixed-Signal Extensions IEC 61691-6:2009(E) IEEE Std 1076.1-2007(E) IEEE Std 1076.1 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEEE All rights reserved. IEEE is a registered trademark in
2、 the U.S. Patent any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organi
3、zation for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical
4、committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publicatio
5、ns is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national
6、and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services
7、 and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held respo
8、nsible for identifying any or all such patent rights. International Standard IEC 61691-6/IEEE Std 1076.1 has been processed through IEC technical committee 93: Design automation. The text of this standard is based on the following documents: IEEE Std FDIS Report on voting 1076.1 (2007) 93/280/FDIS 9
9、3/286/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of parts of the IEC 61691 series can be found on the IEC web site. The committee has decided that the contents of this publication will remain unchange
10、d until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. Published by IEC under licence from IEEE. 2007 IEE
11、E. All rights reserved. IEC 61691-6:2009(E) IEEE Std 1076.1-2007(E) v IEC/IEEE Dual Logo International Standards This Dual Logo International Standard is the result of an agreement between the IEC and the Institute of Electrical and Electronics Engineers, Inc. (IEEE). The original IEEE Standard was
12、submitted to the IEC for consideration under the agreement, and the resulting IEC/IEEE Dual Logo International Standard has been published in accordance with the ISO/IEC Directives. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE
13、 Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are
14、 not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained
15、in its standards. Use of an IEC/IEEE Dual Logo International Standard is wholly voluntary. The IEC and IEEE disclaim liability for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from
16、 the publication, use of, or reliance upon this, or any other IEC or IEEE Standard document. The IEC and IEEE do not warrant or represent the accuracy or content of the material contained herein, and expressly disclaim any express or implied warranty, including any implied warranty of merchantabilit
17、y or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEC/IEEE Dual Logo International Standards documents are supplied “AS IS”. The existence of an IEC/IEEE Dual Logo International Standard does not imply that there are no other ways
18、 to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEC/IEEE Dual Logo International Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the s
19、tate of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to conclude that its contents, although stil
20、l of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. In publishing and making this document available, the IEC and IEEE are not suggesting or rendering professional or other services for
21、 or on behalf of, any person or entity. Neither the IEC nor IEEE is undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEC/IEEE Dual Logo International Standards or IEEE Standards document, should rely upon the advice of a compete
22、nt professional in determining the exercise of reasonable care in any given circumstances. Interpretations Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, t
23、he Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societies
24、 and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. Comments for revision of IEC/IEEE Dual Logo International Standards are welcome from any interested party
25、 regardless of membership affiliation with the IEC or IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE-SA Stand
26、ards Board, 445 Hoes Lane, Piscataway, NJ 08854, USA and/or General Secretary, IEC, 3, rue de Varemb, PO Box 131, 1211 Geneva 20, Switzerland. Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of Electrical and Electronics Enginee
27、rs, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual stan
28、dard for educational classroom use can also be obtained through the Copyright Clearance Center. NOTE Attention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken with resp
29、ect to the existence or validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying patents for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. IEC 61691-6:2009(E) IEEE Std 1076.1-2007(E) vi Published by IEC under licence from IEEE. 2007 IEEE. All rights reserved.
