IEC 62680-1-1-2015 Universal serial bus interfaces for data and power - Part 1-1 Common components - USB Battery Charging Specification Revision 1.2《数据和电源的通用串行总线接口 第1-1部分 常见组件 USB电池充电规格 修订版1.2》.pdf

上传人:figureissue185 文档编号:1237697 上传时间:2019-08-24 格式:PDF 页数:68 大小:7.98MB
下载 相关 举报
IEC 62680-1-1-2015 Universal serial bus interfaces for data and power - Part 1-1 Common components - USB Battery Charging Specification Revision 1.2《数据和电源的通用串行总线接口 第1-1部分 常见组件 USB电池充电规格 修订版1.2》.pdf_第1页
第1页 / 共68页
IEC 62680-1-1-2015 Universal serial bus interfaces for data and power - Part 1-1 Common components - USB Battery Charging Specification Revision 1.2《数据和电源的通用串行总线接口 第1-1部分 常见组件 USB电池充电规格 修订版1.2》.pdf_第2页
第2页 / 共68页
IEC 62680-1-1-2015 Universal serial bus interfaces for data and power - Part 1-1 Common components - USB Battery Charging Specification Revision 1.2《数据和电源的通用串行总线接口 第1-1部分 常见组件 USB电池充电规格 修订版1.2》.pdf_第3页
第3页 / 共68页
IEC 62680-1-1-2015 Universal serial bus interfaces for data and power - Part 1-1 Common components - USB Battery Charging Specification Revision 1.2《数据和电源的通用串行总线接口 第1-1部分 常见组件 USB电池充电规格 修订版1.2》.pdf_第4页
第4页 / 共68页
IEC 62680-1-1-2015 Universal serial bus interfaces for data and power - Part 1-1 Common components - USB Battery Charging Specification Revision 1.2《数据和电源的通用串行总线接口 第1-1部分 常见组件 USB电池充电规格 修订版1.2》.pdf_第5页
第5页 / 共68页
点击查看更多>>
资源描述

1、 IEC 62680-1-1 Edition 1.0 2015-09 INTERNATIONAL STANDARD Universal serial bus interfaces for data and power Part 1-1: Common components USB Battery Charging Specification, Revision 1.2 IEC 62680-1-1:2015-09(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switze

2、rland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country

3、 of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb

4、Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC public

5、ations The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire biblio

6、graphical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (ref

7、erence number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once

8、 a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical V

9、ocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 8

10、6 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62680-1-1 Edition 1.0 2015-09 INTERNATIONAL STANDARD Universal serial bus interfaces for data

11、 and power Part 1-1: Common components USB Battery Charging Specification, Revision 1.2 INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.220; 33.120; 35.200 ISBN 978-2-8322-2844-9 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publicat

12、ion from an authorized distributor. colour inside 2 IEC 62680-1-1:2015 IEC 2015 USB-IF 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER Part 1-1: Common components USB Battery Charging Specification, Revision 1.2 FOREWORD 1) The International Electr

13、otechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. T

14、o this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nati

15、onal Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (

16、ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation

17、 from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot b

18、e held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. A

19、ny divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access

20、to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individ

21、ual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, th

22、is IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of th

23、is IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62680-1-1 has been prepared by technical area 14: Interfaces and methods of measurement for personal computing equipment, of IEC technic

24、al committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on documents prepared by the USB Implementers Forum (USB-IF). The structure and editorial rules used in this publication reflect the practice of the organization which submitted it. IEC 62680-1-1:

25、2015 IEC 2015 3 USB-IF 2014 The text of this standard is based on the following documents: CDV Report on voting 100/2330/CDV 100/2433/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all the parts in the

26、 IEC 62680 series, published under the general title Universal serial bus interfaces for data and power can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.i

27、ec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publicati

28、on indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 4 IEC 62680-1-1:2015 IEC 2015 USB-IF 2014 INTRODUCTION The IEC 62680 series is based on a series of specifications

29、 that were originally developed by the USB Implementers Forum (USB-IF). These specifications were submitted to the IEC under the auspices of a special agreement between the IEC and the USB-IF. The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of companies that

30、 developed the Universal Serial Bus specification. The USB-IF was formed to provide a support organization and forum for the advancement and adoption of Universal Serial Bus technology. The Forum facilitates the development of high-quality compatible USB peripherals (devices), and promotes the benef

31、its of USB and the quality of products that have passed compliance testing. ANY USB SPECIFICATIONS ARE PROVIDED TO YOU “AS IS, “WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE AUTHO

32、RS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON. THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ES

33、TOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS. Entering into USB Adopters Agreements may, however, allow a signing company to participate in a reciprocal, royalty-free licensing arrangement for compliant products. For more information, please see: http:/www.usb.org/developers/docs/ http:/

34、www.usb.org/developers/devclass_docs#approved IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS FORUM.” This series covers the Universal Series Bus interfaces for data and power and consists of the

35、 following parts: IEC 62680-1-1, Universal Serial Bus interfaces for data and power Part 1-1: Common components USB Battery Charging Specification, Revision 1.2 IEC 62680-2-1, Universal Serial Bus interfaces for data and power Part 2-1: Universal Serial Bus Specification, Revision 2.0 IEC 62680-2-2,

36、 Universal Serial Bus interfaces for data and power Part 2-2: USB Micro- USB Cables and Connectors Specification, Revision 1.01 IEC 62680-2-3, Universal Serial Bus interfaces for data and power Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0 This part of the IEC 6268

37、0 series consists of several distinct parts: the main body of the text, which consists of the original specification and all ECN and Errata developed by the USB-IF. IEC 62680-1-1:2015 IEC 2015 5 USB-IF 2014 CONTENTS FOREWORD . 2 INTRODUCTION . 4 1 Introduction . 13 1.1 Scope . 13 1.2 Background. 13

38、1.3 Reference Documents . 13 1.4 Definitions of Terms 14 1.4.1 Accessory Charger Adaptor . 14 1.4.2 ACA-Dock 14 1.4.3 Attach versus Connect . 14 1.4.4 Charging Downstream Port 14 1.4.5 Charging Port 14 1.4.6 Dead Battery Threshold . 14 1.4.7 Dedicated Charging Port 15 1.4.8 Downstream Port . 15 1.4.

39、9 Micro ACA . 15 1.4.10 Portable Device . 15 1.4.11 Rated Current 15 1.4.12 Standard ACA 15 1.4.13 Standard Downstream Port 15 1.4.14 USB Charger . 15 1.4.15 Weak Battery Threshold 15 1.5 Parameter Values . 16 1.6 OTG Considerations . 16 1.7 Super Speed Considerations . 16 2 Dead Battery Provision 1

40、6 2.1 Background. 16 2.2 DBP Unconfigured Clause 16 2.3 DBP Configured Clause . 17 3 Charging Port Detection 18 3.1 Overview. 18 3.2 Charger Detection Hardware . 19 3.2.1 Overview . 19 3.2.2 VBUS Detect . 20 3.2.3 Data Contact Detect 20 3.2.4 Primary Detection 23 3.2.5 Secondary Detection . 30 3.2.6

41、 ACA Detection . 32 3.3 Charger Detection Algorithms . 34 3.3.1 Weak Battery Algorithm . 34 3.3.2 Good Battery Algorithm . 35 3.4 Charger Detection Timing . 36 3.4.1 Data Contact Detect Timing . 36 3.4.2 Detection Timing, CDP 38 3.5 Ground Current and Noise Margins . 40 4 Charging Port and Portable

42、Device Requirements . 40 6 IEC 62680-1-1:2015 IEC 2015 USB-IF 2014 4.1 Charging Port Requirements . 40 4.1.1 Overshoot 40 4.1.2 Maximum Current 40 4.1.3 Detection Renegotiation 40 4.1.4 Shutdown Operation 41 4.1.5 Failure Voltage 41 4.1.6 Multiple Ports 41 4.2 Charging Downstream Port . 41 4.2.1 Req

43、uired Operating Range 41 4.2.2 Shutdown Operation 42 4.2.3 Undershoot 42 4.2.4 Detection Signaling 42 4.2.5 Connector 43 4.3 ACA-Dock . 43 4.3.1 Required Operating Range 43 4.3.2 Undershoot 43 4.3.3 Detection Signaling 43 4.3.4 Connector 43 4.4 Dedicated Charging Port . 43 4.4.1 Required Operating R

44、ange 43 4.4.2 Undershoot 44 4.4.3 Detection Signaling 44 4.4.4 Connector 44 4.5 Accessory Charger Adapter 45 4.5.1 Required Operating Range 45 4.5.2 Undershoot 45 4.5.3 Detection Signaling 45 4.5.4 Connector 45 4.6 Portable Device 45 4.6.1 Allowed Operating Range 45 4.6.2 Detection Signaling 46 4.6.

45、3 Detection Renegotiation 46 4.6.4 Connector 47 5 Parameter Values 47 6 Accessory Charger Adapter . 50 6.1 Introduction . 50 6.2 Micro ACA 52 6.2.1 Micro ACA Ports 52 6.2.2 Micro ACA Connectivity Options 53 6.2.3 Micro ACA Architecture 53 6.2.4 Micro ACA Modes of Operation 54 6.2.5 Implications of n

46、ot Supporting Micro ACA Detection 56 6.2.6 Micro ACA Requirements . 56 6.2.7 Portable Device State Diagram 57 6.3 Standard ACA . 59 6.3.1 Standard ACA Ports 59 6.3.2 Standard ACA Architecture 60 6.3.3 Standard ACA Modes of Operation 62 6.3.4 Implications of not Supporting Standard ACA Detection . 62

47、 IEC 62680-1-1:2015 IEC 2015 7 USB-IF 2014 6.3.5 Standard ACA Requirements . 62 Figure 3-1 System Overview 18 Figure 3-2 Charger Detection Hardware . 19 Figure 3-3 Data Pin Offset . 20 Figure 3-4 Data Contact Detect, Not Attached 21 Figure 3-5 Data Contact Detect, Standard Downstream Port 22 Figure

48、3-6 Primary Detection, DCP 23 Figure 3-7 Primary Detection, CDP 25 Figure 3-8 Primary Detection, SDP 26 Figure 3-9 Primary Detection, ACA-Dock . 27 Figure 3-10 Primary Detection, ACA 29 Figure 3-11 Secondary Detection, DCP 30 Figure 3-12 Secondary Detection, CDP 31 Figure 3-13 ACA Detection 33 Figur

49、e 3-14 Weak Battery Algorithm . 34 Figure 3-15 Good Battery Algorithm . 35 Figure 3-16 DCD Timing, Contact After Start 37 Figure 3-17 DCD Timing, Contact Before Start . 37 Figure 3-18 DCD Timing, No Contact . 38 Figure 3-19 Detection Timing, CDP 39 Figure 4-1 CDP Required Operating Range . 42 Figure 4-2 DCP Required Operating Range . 44 Figure 4-3 Portable Device Allowed Operating Range 46 Figure 6-1 Accessory Charger Adapter 51 Figur

展开阅读全文
相关资源
  • IEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdfIEC TS 62492-1-2008 Industrial process control devices - Radiation thermometers - Part 1 Technical data for radiation thermometers《工业过程控制装置 辐射温度计 第1部分 辐射温度计的技术数.pdf
  • IEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdfIEC TR2 61464-1998 Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the mai.pdf
  • IEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdfIEC TR 61241-2-2-1993 Electrical apparatus for use in the presence of combustible dust part 2 test methods section 2 method for determining the electrical resis.pdf
  • IEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdfIEC TR 60972-1989 Classification and interpretation of new lighting products《新型照明产品的分类和说明》.pdf
  • IEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdfIEC TR 60943 Edition 21-2009 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals《特殊终端中电气设备部件用关于允许.pdf
  • IEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdfIEC TR 60943 AMD 1-2008 Guidance concerning the permissible temperature rise for parts of electrical equipment in particular for terminals Amendment 1《电气设备部件(特别.pdf
  • IEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdfIEC TR 60919-2-2008 Performance of high-voltage direct current (HVDC) systems with line-communicated converters - Part 2 Faults and switching《带线性通信转换器的高压直流(HVDC.pdf
  • IEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdfIEC TR 60870-6-505 Edition 11-2006 Telecontrol equipment and systems - Part.6-505 Telecontrol protocols compatible with ISO standards and ITU-T recommendations .pdf
  • IEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdfIEC TR 60344 CORR1-2012 Calculation of d c resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide Corrigendum 1《.pdf
  • IEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdfIEC 62560 CORR1-2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V - Safety specifications Corrigendum 1《普通照明用50 V以上自镇流LED灯 安全要求 勘误表1》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > IEC

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1