C0007100_895 Transitionary Size Between Taper & Shank《工具圆锥柄至较粗处之过渡尺寸（准则）》.pdf

相关资源

CNS 71-1947 Transitionary Size Between Taper & Shank《工具圆锥柄至较粗处之过渡尺寸（准则）》.pdf

猜你喜欢

SAE ARP 982D-2007 Minimizing Stress-Corrosion Cracking in Wrought Titanium Alloy Products《钛合金制品中断裂的最小化金属超应力引起的腐蚀》.pdf

SAE ARP 987B-2010 The Control of Excess Humidity in Avionics Cooling《航空电子设备过高湿度控制》.pdf

SAE ARP 991B-1996 Position and Anticollision Lights - Turbine Powered Fixed-Wing Aircraft《涡轮机固定翼式飞机的方位与防撞照明》.pdf

SAE ARP 993D-2012 Fluidic Technology《射流技术》.pdf

SAE ARP 996A-1986 Cooling Data for Turbine Engines in Helicopters《直升机内涡轮发动机的冷却数据》.pdf

SAE ARP 997D-2012 Installation and Stowage Provisions for Emergency Equipment in the Transport Aircraft Passenger Cabin《运输机客舱内应急设备的安装和积载规定》.pdf

SAE AS 100001D-2013 Gasket - Type X or XV Engine Accessory Drive《垫圈 X或XV型发动机辅机驱动》.pdf

SAE AS 100002D-2013 Gasket - Type XI Engine Accessory Drive《垫圈 XI型发动机辅机驱动》.pdf

SAE AS 100003D-2013 Gasket - Type XII XIV-A and XIV-B Engine Accessory Drive《垫圈 XII XIV-A和XIV-B型发动起传动装置》.pdf