C0031000_459 Tap for Whitworth Pipe Threading Dies《丝公，适于韦氏螺孔钢板》.pdf

相关资源

C0030600_402 Whitworth Taps for Hole Cylindrical Shank and Square Head《穿透丝公，方头长圆柱柄，适于韦氏螺孔》.pdf

C0031300_752 Guide Tap for Whitworth Thread Machine Operated《导引丝公，机用，适于韦氏螺孔》.pdf

CNS 310-1953 Tap for Whitworth Pipe Threading Dies《丝公，适于韦氏螺孔钢板》.pdf

CNS 306-1953 Whitworth Taps for Hole Cylindrical Shank and Square Head《穿透丝公，方头长圆柱柄，适于韦氏螺孔》.pdf

CNS 313-1953 Guide Tap for Whitworth Thread Machine Operated《导引丝公，机用，适于韦氏螺孔》.pdf

猜你喜欢

AGMA 97FTM9-1997 Relations Between Wear and Pitting Phenomena in Worm Gears《蜗轮中的磨损和点蚀现象之间的关系》.pdf

AGMA 97FTMS1-1997 Coordinate Measurement and Reverse Engineering of ZK Type Worm Gearing《ZK型蜗轮传动装置的坐标量测和逆向工程设计》.pdf

AGMA 98FTM1-1998 Method for Predicting the Dynamic Root Stresses of Helical Gear Teeth《预测螺旋齿的动态齿根应力的方法》.pdf

AGMA 98FTM10-1998 Local Coefficients of Friction in Worm Gear Contacts《蜗轮接触的局部摩擦系数》.pdf

AGMA 98FTM11-1998 Improving Pump Gear Geometry Through Secondary Gear Tooth Finishing《通过二档齿轮齿精整提高泵齿轮的几何精度》.pdf

AGMA 98FTM12-1998 Gear Refurbishment an Economical Approach for Aerospace Overhaul & Repair《齿轮翻新.航空大修和维修的一种经济方法》.pdf

AGMA 98FTM2-1998 Mesh Friction in Gearing《齿轮的啮合摩擦》.pdf

AGMA 98FTM3-1998 Basic Studies on Fatigue Strength of Case-Hardened Gear Steel - Effects of Shot Peening and or Barrelling Processes《渗碳硬化齿轮钢疲劳强度的基本研究.喷丸硬化和 或滚光加工的作用》.pdf

AGMA 98FTM4-1998 Effect of Uncontrolled Heat Treat Distortion on the Pitting Life of Ground Carburized and Hardened Gears《不受控制的热处理变形对于磨光 渗碳和硬化齿轮的点蚀寿命的影响》.pdf