C0141900_866 Method of Test for Acetone《丙酮检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M2G21-A-2014 ADHESIVE RUBBER BASE - FAST TACK - SOLVENT RELEASE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M2G218-A-2014 ADHESIVE EPOXY - FLEXIBLE - STRUCTURAL - TWO COMPONENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M2G239-A-2014 ADHESIVE VINYL BASED - LOW AND HIGH TEMPERATURE CURE SEMI-STRUCTURAL TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M2G250-A-2014 ADHESIVE HOT MELT - CO-POLYMER FILM OF ETHYLENE AND ACRYLIC ACID TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M2G281-A-2006 ADHESIVE HEAT CURING - EPOXY GLASS FIBER LAMINATE METAL REINFORCEMENT TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M11P64-A1 A2 A3)《金属增强的环氧树脂 玻璃纤维层压板用热固型胶粘.pdf

FORD ESB-M2G281-C-2006 ADHESIVE HEAT CURING - EPOXY GLASS FIBER LAMINATE FOR METAL REINFORCEMENT - LOW BAKE TO BE USED WITH FORD WSS-M99P1111-A 《金属增强的环氧树脂 玻璃纤维层压板用低温烘干型热固胶粘剂 与标准.pdf

FORD ESB-M2G281-E-2006 ADHESIVE MAGNETIC HEAT CURING EPOXY GLASS FIBER LAMINATE METAL REINFORCEMENT TO BE USED WITH FORD WSS-M99P1111-A (Use FORD WSS-M11P64-A1 A2 A3)《金属增强的环氧树脂 玻.pdf

FORD ESB-M2G291-A-2014 PRIMER ADHESION ACRYLIC - FOR POLYVINYL CHLORIDE WEATHERSTRIPS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M2G347-A-1990 ADHESIVE EPOXY HYBRID - TWO COMPONENT ROOM TEMPERATURE CURE OR INDUCTION CURING STRUCTURAL《结构用两组分室温固化或感应固化环氧树脂混合型胶粘剂》.pdf