1、 IEC 61169-51 Edition 1.0 2015-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock Characteristic impedance 50 (type QLI) Connecteurs pour frquences radi
2、olectriques Partie 51: Spcification intermdiaire relative aux connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur des conducteurs extrieurs de 13,5 mm verrouillage baonnette Impdance caractristique 50 (type QLI) IEC 61169-51:2015-02(en-fr) colour inside THIS PUBLICATION IS COPY
3、RIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IE
4、C or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de
5、 reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays
6、du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fa
7、x: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publicat
8、ions The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliogr
9、aphical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (refer
10、ence number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a
11、 month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Voc
12、abulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86
13、and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mo
14、ndiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un cor
15、rigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tab
16、lettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires.
17、 IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lec
18、troniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres term
19、inologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donne
20、r des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61169-51 Edition 1.0 2015-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Radio-frequency connectors Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors
21、 13,5 mm with bayonet lock Characteristic impedance 50 (type QLI) Connecteurs pour frquences radiolectriques Partie 51: Spcification intermdiaire relative aux connecteurs coaxiaux pour frquences radiolectriques avec diamtre intrieur des conducteurs extrieurs de 13,5 mm verrouillage baonnette Impdanc
22、e caractristique 50 (type QLI) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 33.120.30 ISBN 978-2-8322-2238-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make s
23、ure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 61169-51:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Mating face
24、and gauge information . 8 3.1 Dimensions General connectors . 8 Connector with socket-centre contact . 8 3.1.1Connector with pin-centre contact. 12 3.1.2 3.2 Gauges for connector with socket-centre contact . 14 Centre contact . 14 3.2.1Test procedure . 14 3.2.2Gauge for outer contact 15 3.2.3 4 Qual
25、ity assessment procedures . 15 4.1 General . 15 4.2 Ratings and characteristics . 15 4.3 Periodic tests 18 4.4 Procedures for the qualification approval . 20 Quality conformance inspection 20 4.4.1Qualification approval and its maintenance . 20 4.4.2 5 Instructions for preparation of detail specific
26、ations (DS) . 20 5.1 General . 20 5.2 Identification of the component 20 5.3 Performances 21 5.4 Marking, ordering information and related matters 21 5.5 Selection of tests, test conditions and severities 21 5.6 Blank detail specification pro-forma for type QLI connector 22 6 Marking . 27 6.1 Markin
27、g of component . 27 6.2 Marking and contents of package 27 Figure 1 Connector with socket-centre contact with 2 options (for dimensions and key, see Table 1) 8 Figure 2 Detail of bayonet lock groove, option 1 (for dimensions and key, see Table 1) . 9 Figure 3 Detail of bayonet lock groove, option 2
28、(for dimensions and key, see Table 1) . 9 Figure 4 Female centre contact (for dimensions and key, see Table 1 . 10 Figure 5 Connector with pin-centre contact (for dimensions and key, see Table 2) . 12 Figure 6 Details of pin-centre contact (for dimensions, see Table 2) 12 Figure 7 Gauge pin for sock
29、et-centre contact (for dimensions, see Table 3) . 14 Figure 8 Gauge ring for socket outer contact (for dimensions, see Table 4) . 15 IEC 61169-51:2015 IEC 2015 3 Table 1 Dimensions of connector with socket-centre contact . 11 Table 2 Dimensions of connector with pin-centre contact 13 Table 3 Gauge d
30、imensions for socket-centre contact 14 Table 4 Dimensions of gauge ring for socket outer contact 15 Table 5 Rating and characteristics 16 Table 6 Acceptance tests . 18 Table 7 Periodic tests 19 4 IEC 61169-51:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 5
31、1: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock Characteristic impedance 50 (type QLI) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electr
32、otechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifica
33、tions, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internationa
34、l, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal de
35、cisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for int
36、ernational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In
37、order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be
38、clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certificati
39、on bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, p
40、roperty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited
41、in this publication. Use of the referenced publications is indispensable for the correct application of this publication. International Standard IEC 61169-51 has been prepared by subcommittee 46F: R.F. and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. c
42、onnectors, R.F. and microwave passive components and accessories. The text of this standard is based on the following documents: FDIS Report on voting 46F/295/FDIS 46F/310/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above
43、 table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. IEC 61169-51:2015 IEC 2015 5 A list of all parts of the IEC 61169 series, under the general title: Radio-frequency connectors, can be found on the IEC website. The committee has decided that the contents of
44、this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour i
45、nside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 IEC 61169-51:2015 IEC 2015 INTRODUCTION The international Electrot
46、echnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning the design of the connector given in 3.1. IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this
47、patent right has assured the IEC that he/she is willing to negotiate licence under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holders of this patent right is registered with IEC. More detailed information may be
48、obtained from: Radiall SA Mr. Pierre Bigot, RFI Division P Phone:+33 47 650 0057 Z.I Centralp 642 rue Emile Romanet, B.P. 35 F-38341 Voreppe Cedex, France Attention is drawn to the possibility that some of elements of this document may be the subject of patent rights other than those identified abov
49、e. IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/patents.iec.ch) maintain on-line data bases of patents relevant to their standards. Users are encouraged to consult the data bases for the most up to date information concerning patents. IEC 61169-51:2015 IE
