1、 IEC 61587-4 Edition 1.0 2012-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 series Part 4: Combination of performance levels for modular cabinets Structures mcaniques pour quipement lectronique Essais pour les sries CE
2、I 60917 et CEI 60297 Partie 4: Combinaison des niveaux de performance pour les baies modulaires IEC61587-4:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized i
3、n any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rig
4、hts to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun pr
5、ocd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coor
6、donnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading glo
7、bal organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or
8、an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publica
9、tions. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and el
10、ectrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this
11、 publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectroniqu
12、e et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.
13、ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez
14、inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de
15、 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication o
16、u si vous avez des questions contactez-nous: csciec.ch. IEC 61587-4 Edition 1.0 2012-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 series Part 4: Combination of performance levels for modular cabinets Structures mcaniq
17、ues pour quipement lectronique Essais pour les sries CEI 60917 et CEI 60297 Partie 4: Combinaison des niveaux de performance pour les baies modulaires INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 31.240 PRICE CODE CODE PRIX ISBN 978-2-83220-199-2 Registe
18、red trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distribute
19、ur agr. 2 61587-4 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 7 2 Normative references . 7 Bibliography 12 Figure 1 Arrangement overview of a modular cabinet system . 5 Figure 2 Basic modular cabinet 6 Table 1 List of requirements used to specify a cabinet . 8 Table 2 Protection agains
20、t dust and water . 8 Table 3 Climatic conditions 8 Table 4 Industrial atmosphere 9 Table 5 Static load test 9 Table 6 Dynamic load test 9 Table 7 Impact load test . 9 Table 8 Seismic load test . 9 Table 9 Electromagnetic shielding 10 Table 10 Examples of performance level combinations 10 Table 11 Ty
21、pical application examples . 11 61587-4 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT TESTS FOR IEC 60917 AND IEC 60297 SERIES Part 4: Combination of performance levels for modular cabinets FOREWORD 1) The International Electrotechnical Commiss
22、ion (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
23、addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee int
24、erested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance
25、with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all intereste
26、d IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible
27、for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence betwe
28、en any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of con
29、formity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and mem
30、bers of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication
31、or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication
32、may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61587-4 has been prepared by subcommittee 48D: Mechanical structures for electronic equipment, of IEC technical committee 48: Electromechanical components
33、and mechanical structures for electronic equipment. The text of this standard is based on the following documents: FDIS Report on voting 48D/514/FDIS 48D/518/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This p
34、ublication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 61587-4 IEC:2012 A list of all parts of IEC 61587 series, under the general title Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 series. can be found on the IEC website. Future standard
35、s in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site
36、under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61587-4 IEC:2012 5 INTRODUCTION Requirements for application specific cabinet systems vary considerably. Typically,
37、applications such as industrial, power distribution, IT, communications, data centres, multimedia, traffic control, etc., require differing features. These differing features are hardly common and many range from static load to dynamic load, including seismic test, protection (IP), electromagnetic s
38、hielding (EMC) provision, and many other detailed requirements. It is unrealistic and uneconomical to expect from an economical system to offer an all compliant cabinet from multiple sources. Rear-panel Side-panel Bottom cover Roof Framework Door IEC 1184/12 Figure 1 Arrangement overview of a modula
39、r cabinet system This design guide describes an economically optimal solution for a cabinet system consisting of a modular frame type structure design enhanced by basic cabinet components, such as a door(s), a bottom cover, a roof and side and rear panels. See Figure 1. To fulfil the specific applic
40、ation requirements the user can choose external and/or internal upgrade kits. See Figure 2. Based on this optimal economical solution for a cabinet system, this guide helps the user to select a cabinet matching the performance level of the application. Based on this economical optimal solution for a
41、 cabinet system, this guide helps to provide for a modular cabinet economical system supported by multiple vendors. 6 61587-4 IEC:2012 Figure 2 Basic modular cabinet Requirements for cabinets of a frame type structure Basic cabinet components Side panel(s) Rear panel(s) Door(s) Roof Bottom cover Fra
42、mework Cabinet frame type structure Environmental condition Structural stiffness Static/dynamic load Shock/Vibration Seismic Transport EMC IP Code Earthing Side by side mounting Upgrade kits internal Chassis, subrack or front panel mounting rails Swing frames Mounting panels Mounting rails Air filte
43、rs Cable management Power management Cooling management Earthing Upgrade kits external Cable management boxes*) Cable entry/exit*) Power entry*) Cooling management devices* Lifting eyes*) Castors*) Base/Plinth*) Floor anchoring*) Side by side mounting*) Earthing*) Security locks*)*) No further refer
44、ence in this standard IEC 1185/12 61587-4 IEC:2012 7 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT TESTS FOR IEC 60917 AND IEC 60297 SERIES Part 4: Combination of performance levels for modular cabinets 1 Scope This part of IEC 61587 provides the combinations of different degrees of protection for
45、cabinet systems regarding IP code, climate levels, static and dynamics load tests, electromagnetic shielding and seismic requirements. Optimal economical solution can be ensured by ordering a cabinet with specific properties for which this design guide provides the easy selection of defined performa
46、nce levels. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includi
47、ng any amendments) applies. IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 61587-1, Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 series Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chas
48、sis under indoor conditions IEC 61587-2, Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 2: Seismic tests for cabinets and racks IEC 61587-3, Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 Part 3: Electromagnetic shielding perfo
49、rmance tests for cabinets, racks and subracks 3 Selection of performance levels The environmental and test requirements for cabinets are defined in existing standards. According to IEC 60529 enclosure systems can be classified by their IP code. The IP code is a 2 digit number where the first digit (0 6) indicates the lev
