1、 IEC 62271-105 Edition 2.0 2012-09 INTERNATIONAL STANDARD NORME INTERNATIONALE High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV Appareillage haute tension Partie 105: Combins interrupteurs-fusibles
2、pour courant alternatif de tensions assignes suprieures 1 kV et jusqu 52 kV inclus IEC62271-105:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
3、or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this
4、 publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectro
5、nique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-a
6、prs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organiz
7、ation that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendmen
8、t might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC
9、Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical te
10、rms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publicatio
11、n or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux te
12、chnologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpu
13、b La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur
14、les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 ter
15、mes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous a
16、vez des questions contactez-nous: csciec.ch. IEC 62271-105 Edition 2.0 2012-09 INTERNATIONAL STANDARD NORME INTERNATIONALE High-voltage switchgear and controlgear Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV Appareillage haute tension
17、 Partie 105: Combins interrupteurs-fusibles pour courant alternatif de tensions assignes suprieures 1 kV et jusqu 52 kV inclus INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XA ICS 29.130.10 PRICE CODE CODE PRIX ISBN 978-2-83220-401-6 Registered trademark of the
18、 International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 62271-105
19、IEC:2012 CONTENTS FOREWORD . 5 1 General 7 1.1 Scope 7 1.2 Normative references 8 2 Normal and special service conditions 8 3 Terms and definitions . 8 3.1 General terms . 8 3.2 Assemblies of switchgear and controlgear 8 3.3 Parts of assemblies 8 3.4 Switching devices . 8 3.5 Parts of switchgear and
20、 controlgear 9 3.6 Operation . 10 3.7 Characteristic quantities . 10 3.101 Fuses . 14 4 Ratings . 15 4.1 Rated voltage (Ur) 15 4.2 Rated insulation level . 15 4.3 Rated frequency (fr) 15 4.4 Rated normal current and temperature rise . 15 4.4.1 Rated normal current (Ir) . 15 4.4.2 Temperature rise .
21、15 4.5 Rated short-time withstand current (Ik) . 15 4.6 Rated peak withstand current (Ip) . 15 4.7 Rated duration of short-circuit (tk) . 15 4.8 Rated supply voltage of closing and opening devices and of auxiliary and control circuits (Ua) . 16 4.9 Rated supply frequency of closing and opening devic
22、es and of auxiliary circuits 16 4.10 Rated pressure of compressed gas supply for controlled pressure systems 16 4.11 Rated filling levels for insulation and/or operation . 16 4.101 Rated short-circuit breaking current 16 4.102 Rated transient recovery voltage 16 4.103 Rated short-circuit making curr
23、ent 16 4.104 Rated transfer current (striker operation) (Irtransfer) . 17 4.105 Rated take-over current for release-operated combinations (Ito) . 17 5 Design and construction . 17 5.1 Requirements for liquids in switch-fuse combinations . 17 5.2 Requirements for gases in switch-fuse combinations 17
24、5.3 Earthing of switch-fuse combinations 17 5.4 Auxiliary and control equipment 17 5.5 Dependent power operation 17 5.6 Stored energy operation . 17 5.7 Independent manual or power operation (independent unlatched operation) . 17 5.8 Operation of releases . 17 5.9 Low- and high-pressure interlocking
25、 and monitoring devices . 17 5.10 Nameplates 17 62271-105 IEC:2012 3 5.11 Interlocking devices 18 5.12 Position indication 18 5.13 Degrees of protection provided by enclosures. 18 5.14 Creepage distances for outdoor insulators 18 5.15 Gas and vacuum tightness 19 5.16 Liquid tightness 19 5.17 Fire ha
26、zard (flammability) . 19 5.18 Electromagnetic compatibility (EMC). 19 5.19 X-ray emission 19 5.20 Corrosion 19 5.101 Linkages between the fuse striker(s) and the switch release . 19 5.102 Low over-current conditions (long fuse-pre-arcing time conditions) . 19 6 Type tests 20 6.1 General 20 6.1.1 Gro
27、uping of tests 20 6.1.2 Information for identification of specimens 21 6.1.3 Information to be included in the type-test reports . 21 6.2 Dielectric tests 21 6.3 Radio interference voltage (r.i.v.) tests . 21 6.4 Measurement of the resistance of circuits . 21 6.5 Temperature-rise tests 21 6.6 Short-
28、time withstand current and peak withstand current tests 21 6.7 Verification of the protection . 21 6.8 Tightness tests . 21 6.9 Electromagnetic compatibility tests (EMC) 21 6.10 Additional tests on auxiliary and control circuits 21 6.11 X-radiation test procedure for vacuum interrupters 22 6.101 Mak
29、ing and breaking tests 22 6.101.1 General . 22 6.101.2 Conditions for performing the tests 22 6.101.3 Test-duty procedures 28 6.101.4 Behaviour of the combination during tests . 33 6.101.5 Condition of the apparatus after testing . 33 6.102 Mechanical operation tests . 34 6.103 Mechanical shock test
30、s on fuses . 34 6.104 Thermal test with long pre-arcing time of fuse . 35 6.105 Extension of validity of type tests 35 6.105.1 Dielectric . 35 6.105.2 Temperature rise . 35 6.105.3 Making and breaking . 35 7 Routine tests 36 7.101 Mechanical operating tests . 36 8 Guide for the selection of switch-f
31、use combinations 36 8.1 Selection of rated values . 36 8.2 Continuous or temporary overload due to changed service conditions . 37 8.101 Guide for the selection of switch-fuse combination for transformer protection 37 8.101.1 General . 37 8.101.2 Rated short-circuit breaking current 37 4 62271-105 I
32、EC:2012 8.101.3 Primary fault condition caused by a solid short-circuit on the transformer secondary terminals . 37 8.102 Coordination of switch and fuses for extension of the reference list . 38 8.102.1 General . 38 8.102.2 Rated normal current 38 8.102.3 Low over-current performance 39 8.102.4 Tra
33、nsfer current 39 8.102.5 Take-over current 39 8.102.6 Extension of the validity of type tests 39 8.103 Operation 39 9 Information to be given with enquiries, tenders and orders . 40 9.1 Information with enquiries and orders 40 9.2 Information with tenders 40 10 Transport, storage, installation, oper
34、ation and maintenance . 40 11 Safety . 41 12 Influence of the product on the environment . 41 Annex A (informative) Example of the coordination of fuses, switch and transformer 42 Annex B (normative) Procedure for determining transfer current 45 Annex C (normative) Tolerances on test quantities for
35、type tests . 50 Bibliography 51 Figure 1 Arrangement of test circuits for test duties TDIscand TDIWmax. 23 Figure 2 Arrangement of test circuits for test-duty TDItransfer24 Figure 3 Arrangement of test circuits for test-duty TDIto. 24 Figure 4 Determination of power-frequency recovery voltage . 26 F
36、igure 5 Representation of a specified TRV by a two-parameter reference line and a delay line 27 Figure 6 Example of a two-parameter reference line for a TRV 28 Figure 7 Characteristics for determining take-over current . 32 Figure 8 Transfer current in relation to the primary fault current Iscdue to
37、 a solid short circuit in the transformer secondary terminal 38 Figure A.1 Characteristics relating to the protection of an 11 kV 400 kVA transformer . 43 Figure A.2 Discrimination between HV and LV fuses 44 Figure B.1 Practical determination of the transfer current . 46 Figure B.2 Determination of
38、the transfer current with the iterative method 48 Table 1 Nameplate markings 18 Table 2 Standard values of prospective TRV for test-duty TDItransferbased on practice in Europe . 30 Table 3 Standard values of prospective TRV for test-duty TDItransferbased on practice in the United States of America a
39、nd Canada 31 Table 4 Summary of test parameters for test duties . 32 Table C.1 Tolerances on test quantities for type tests 50 62271-105 IEC:2012 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 105: Alternating current switch-fuse combinations for rated vol
40、tages above 1 kV up to and including 52 kV FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
41、questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publica
42、tion(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC
43、collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opin
44、ion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to e
45、nsure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently
46、 to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certifica
47、tion bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall a
48、ttach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal f
49、ees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
