CNS 7234-1981 Cast Iron Deck End Rollers《铸铁制甲板端滚子》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 2466-2009 de en 5916 Aerospace series - Steel FE-PA3901 (X2CrNi19-11) - Softened - Forgings - D 100 mm German and English version EN 2466 2009《航空航天系列 钢FE-PA3901(X2CrNi19-11).pdf

DIN EN 2467-2008 Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate sheet and strip - 0 4 mm a 20 mm - 520 MPa R 670 MPa German and English version EN .pdf

DIN EN 2469-2007 Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0 4 mm D 12 5 mm - 450 MPa R 650 MPa German and English version EN 2469 2007《航空航.pdf

DIN EN 247-1997 Heat exchangers - Terminology German version EN 247 1997《热交换器 术语》.pdf

DIN EN 2478-2009 Aerospace series - Steel FE-PL2107 (30NiCrMo16) - 1220 MPa R 1370 MPa - Bars - D 40 mm German and English version EN 2478 2008《航空航天系列 FE-PL2107(30NiCrMo16)型钢 1220 .pdf

DIN EN 248-2003 Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr German version EN 248 2002《卫生设备用水龙头制品 镍铬电镀层的一般要求 德文版本 EN 248 2002》.pdf

DIN EN 2480-2009 Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa R 1400 MPa - Bars - D 75 mm German and English version EN 2480 2008《航空航天系列 FE-PL2108(36NiCrMo16)型钢 1250.pdf

DIN EN 2481-2011 Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa R 1 400 MPa - Forgings - D 75 mm German and English version EN 2481 2010《航空和航天系列 钢FE-PL2108 (36镍铬钼16) 1.pdf

DIN EN 2482-2011 Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 100 MPa R 1 300 MPa - Bars - D 100 mm German and English version EN 2482 2010《航空航天系列 钢FE-PL2108 (36NiCrMo16) 11.pdf