CSN ON 44 5596-1968 《巩固木业》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SIS SMS 2415-1964 Tolerances for gauges Holes ISO M5 - M8《测规公差 ISO孔公差M5 - M8》.pdf

SIS SMS 2416-1964 Tolerances for gauges Holes ISO N5 - N11《测规公差 ISO孔公差N5 - N11》.pdf

SIS SMS 2417-1964 Tolerancet for ga uges Holes ISO P5 - P9《测规公差 ISO孔公差P5 - P9》.pdf

SIS SMS 2418-1964 Tolerances for gauges Holts ISO R5 - R8《测规公差 ISO孔公差R5 - R8》.pdf

SIS SMS 2419-1964 Tolerances for gauges Holes ISO S5 - S8《测规公差 ISO孔公差s5 –s8》.pdf

SIS SMS 2420-1964 Tolerances for gauges Holes ISO T6 - T8《测规公差 ISO孔公差T6 - T8》.pdf

SIS SMS 2421-1964 Tolerances for gauges Holes ISO U6 - U8《测规公差 ISO孔公差u6 – u8》.pdf

SIS SMS 2422-1964 Toleeernces for gauges Holes ISO v6-v8《测规公差 ISO孔公差v6 - v8》.pdf

SIS SMS 2423-1964 Tolerances for gauges Holes % ISO X6 - X8《测规公差 孔 ISO公差 X6 - x8》.pdf