CSN ON 58 2350-1964 《使用紫色时的焦油色》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6456-1999(2004) Standard Specification for Finished Parts Made from Polyimide Resin《由聚酰亚胺树脂生产的精致部件的标准规范》.pdf

ASTM D6456-2010 0000 Standard Specification for Finished Parts Made from Polyimide Resin《聚酰亚胺树脂制制成部件的标准规范》.pdf

ASTM D6456-2010(2018) 8125 Standard Specification for Finished Parts Made from Polyimide Resin.pdf

ASTM D6457-2004 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)《聚四氟乙烯制挤压和压缩模塑杆和厚壁管的标准规范》.pdf

ASTM D6457-2008 781 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)《聚四氟乙烯制挤压和压缩模塑杆和厚壁管的标准规范》.pdf

ASTM D6457-2008(2013) 1875 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)《聚四氟乙烯 (PTFE) 制挤压成型和压模成型的棒.pdf

ASTM D6458-1999(2006) Standard Tables of Body Measurements for Boys Sizes 8 to 14 Slim and 8 to 20 Regular《尺寸为8至14和8至20的男孩身体测量用标准表》.pdf

ASTM D6458-2012 red 5000 Standard Tables of Body Measurements for Boys Sizes 8 to 14 Slim and 8 to 20 Regular《尺寸为8至14 (纤细) 和8至20 (正常) 的男孩身体测量用标准表》.pdf

ASTM D6459-2007 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion《防止山坡降雨引起侵蚀的轧制冲刷控制.pdf