CSN ON 70 4132-1967 《自动滴定管》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ONORM M 4870-1975 Cutting off wheels Type 101 for stationary grinding-machines《切断砂轮，固定式磨床》.pdf

ONORM M 4875-1990 Bonded abrasive products hand finishing sticks and oil stones designation dimensions marking of conformity《粘结磨料产品 手工加工杆和磨刀石 名称，尺寸，合格标识》.pdf

ONORM M 4880-1993 Abrasive products with diamond or cubic boron nitride - General survey nomenclature designation marking《钻石或立方晶氮化硼的磨料产品 一般调查，术语，名称，标识》.pdf

ONORM M 4899-1975 Nomenclature of the assembly tools for bolts nuts and screws in German Greek Serbo-Croatian and Turkish language《德文；希腊文；塞尔维亚语；克罗地亚和土耳其语中螺栓，螺母和螺丝的装配工具术语》.pdf

ONORM M 4900-1972 Nomenclalure of the assembly tools for bolls nuts and screws Nomenclature des outils de manoeuvre des vis et icrous 《螺栓，螺母和螺丝的装配工具术语》.pdf

ONORM M 4903-1989 Engineers wrenches double head open end with unequal jaw widths test torques series D marking of conformity《工程师用扳手双头开口的，不等颚宽，测试扭矩系列D；合格标识》.pdf

ONORM M 4906-1989 Box wrenches double head with unequal openings flat and offset test torques series B marking of conformity《梅花扳手双头不等开口，平板和支管 测试扭矩系列B；合格标识》.pdf

ONORM M 4909-1989 Box wrenches double head deep offset with unequal openings fest torques sehes A marking of conformity《梅花扳手双头不等开口的深支管，测试扭矩系列A；合格标识》.pdf

ONORM M 4910-1989 Box wrenches double head modified offset with unequal openings fest torques series A marking of conformity《梅花扳手双头不等开口的改进支管 测试扭矩系列A 合格标识》.pdf