1、 IEEE Std 1138TM-2009/Cor 1-2014(Corrigendum toIEEE Std 1138-2009)IEEE Standard for Testing and Performance for Optical GroundWire (OPGW) Use on ElectricUtility Power LinesCorrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration VelocitySponsorPower System Communications Committeeof th
2、eIEEE Power and Energy SocietyApproved 21 August 2014IEEE-SA Standards BoardAbstract: This corrigendum corrects the temperature associated with the Stress-Strain clause; and corrects the use of the term velocity in the Aeolian Vibration clause of IEEE Std 1138TM-2009. Keywords: Aeolian vibration tes
3、t, IEEE 1138TM, fiber optic ground wire, laboratory tests, OPGW, optical ground wire, stress-strain test, type tests xThe Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2014 by The Institute of Electrical and Electronics Engineers, Inc.
4、All rights reserved. Published 26 September 2014. Printed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims an
5、y and all conditions relating to: results; and workmanlike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, marke
6、t, or provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In pu
7、blishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, shou
8、ld rely upon his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard.IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDE
9、NTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
10、 OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.Translations The IEEE consensus development process involves the review of documents in English onl
11、y. In the event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be consid
12、ered or inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that h
13、is or her views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standardsComments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not pro
14、vide consulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important tha
15、t any responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter h
16、as previously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group.Comments on standards should be submitted to the following address:Secreta
17、ry, IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USALaws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requiremen
18、ts. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so.Copyri
19、ghtsIEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws.They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulat
20、ion, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents.Photocopies Subject to payment of the appropriate fee, IEEE wil
21、l grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive
22、, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center.Updating of IEEE Standards documents Users of IEEE Standards documents should be aware that these documents
23、may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or err
24、ata then in effect.Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the ar
25、t. Users are cautioned to check to determine that they have the latest edition of any IEEE standard.In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE-SA Website at http:/ieee
26、xplore.ieee.org/xpl/standards.jsp or contact IEEE at the address listed previously. For more information about the IEEE SA or IEEEs standards development process, visit the IEEE-SA Website athttp:/standards.ieee.org.Errata Errata, if any, for all IEEE standards can be accessed on the IEEE-SA Website
27、 at the following URL:http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically.PatentsAttention is called to the possibility that implementation of this standard may require use of subject matter covered by patent rights. By publication of t
28、his standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the IEEE-SA Website at
29、 http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of any unfai
30、r discrimination to applicants desiring to obtain such licenses.Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal va
31、lidity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of
32、 the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.Copyright 2014 IEEE. All rights reserved.viParticipantsAt the time this IEEE standard was completed, the Fibe
33、r Optic Standards Working Group had the following membership:William Byrd, ChairBob Bratton, Vice ChairAl BonnymanMark BoxerChit ChitrangadCorinne DimnikPat DobbinsSanjib DuttaDenise FreyJim HartpenceJohn JonesDelavar KhomarlouKhoa LuMark NaylorFukuda NozomuElio MorenoPercy PoolLluis-Ramon Soles Cas
34、alsDavid ReeveJim RyanTewfik SchehadeMonty TuominenBob WhatleyThe following members of the individual balloting committee voted on this standard. Balloters may have voted for approval, disapproval, or abstention.Robert BrattonGustavo BrunelloWilliam ByrdCorrine DimnikDenise FreyGeorge GelaFrank Gerl
35、eveJalal GohariRandall GrovesJoseph L. KoepfingerJim KulchiskyMichael NewmanGary NissenPercy PoolCharles RogersBartien SayogoJohn VergisWhen the IEEE-SA Standards Board approved this standard on 21 August 2014, it had the following membership:John Kulick, ChairJon Walter Rosdahl, Vice-chairRichard H
36、. Hulett, Past ChairKonstantinos Karachalios, SecretaryPeter BalmaFarooq BariTed BurseClint ChaplainStephen DukesJean-Phillippe FaureGary HoffmanMichael JanezicJeffrey KatzJoseph L. Koepfinger*David LawHung LingOleg LogvinovTed OlsenGlenn ParsonsRon PetersonAdrian StephensPeter SutherlandYatin Trive
37、diPhil WinstonDon WrightYu Yuan*Member EmeritusAlso included are the following nonvoting IEEE-SA Standards Board liaisons:Richard DeBlasio, DOE RepresentativeMichael Janezic, NIST RepresentativeDon MessinaIEEE-SA Content PublishingErin SpiewakIEEE-SA Standards Technical CommunityCopyright 2014 IEEE.
38、 All rights reserved.viiIntroductionThis introduction is not part of IEEE Std 1138TM-2009/Cor 1-2014, IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) Use on Electric Utility Power Lines, Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration Velocity.IEEE Std
39、 1138-2009/Cor 1-2014 corrects errors in 6.4, Qualification Tests of IEEE Std 1138-2009. A correction is also made to the laboratory temperature in 6.4.1.2. Stress-Strain; and a correction is made to the term velocity in 6.4.3.1. Aeolian Vibration Test.Copyright 2014 IEEE. All rights reserved.viiiCo
40、ntents6. Tests . 2 6.4 Qualification tests 2 6.4.1 Cable characteristics tests 2 6.4.1.2 Stress-Strain Test 2 6.4.3.1 Aeolian Vibration Test . 2 Copyright 2014 IEEE. All rights reserved.1IEEE Standard for Testing and Performance for Optical GroundWire (OPGW) Use on ElectricUtility Power LinesCorrige
41、ndum 1: Stress-Strain Temperature Correction, Aeolian Vibration VelocityIMPORTANT NOTICE: IEEE Standards documents are not intended to ensure safety, security, health, or environmental protection, or ensure against interference with or from other devices or networks.Implementers of IEEE Standards do
42、cuments are responsible for determining and complying with all appropriate safety, security, environmental, health, and interference protection practices and allapplicable laws and regulations.This IEEE document is made available for use subject to important notices and legal disclaimers. These noti
43、ces and disclaimers appear in all publications containing this document and may be found under the heading “Important Notice” or “Important Notices and Disclaimers Concerning IEEE Documents.” They can also be obtained on request from IEEE or viewed at http:/standards.ieee.org/IPR/disclaimers.html.NO
44、TEThe editing instructions contained in this corrigendum define how to merge the material contained therein into the existing base standard and its amendments to form the comprehensive standard.The editing instructions are shown in bold italic. Four editing instructions are used: change, delete, ins
45、ert, and replace. Change is used to make corrections in existing text or tables. The editing instruction specifies the location of the change and describes what is being changed by using strikethrough (to remove old material) and underscore (to add new material). Delete removes existing material. In
46、sert adds new material without disturbing the existing material. Insertions may require renumbering. If so, renumbering instructions are given in the editing instruction. Replace is used to make changes in figures or equations by removing the existing figure or equation and replacing it with a new o
47、ne. Editing instructions, change markings, and this NOTE will not be carried over into future editions because the changes will be incorporated into the base standard. IEEE Std 1138-2009/Cor 1-2014IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) Use on Electric Utility Power
48、Lines Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration VelocityCopyright 2014 IEEE. All rights reserved.26. Tests6.4 Qualification tests6.4.1 Cable characteristics tests6.4.1.2 Stress-Strain TestChange the following sentence in 6.4.1.2, Stress-Strain Test, under Set-up as shown
49、:Set-upThe test shall be carried out in a temperature-controlled environment at 2 C 3 C.22 C 3 C.6.4.3 In-service tests6.4.3.1 Aeolian Vibration TestChange the following paragraph in 6.4.3.1, Aeolian Vibration Test, under the Procedure as shown:ProcedureThe free loop conductor velocity (i.e., fymax= vibration frequency x peak-to-peak free loop amplitude) shall be maintained at an average value of at least 275 mm/s peak for the duration of the test. The vibration frequency shall be approximately equivalent to that produced by a 4.5 m/s wind (i.e., frequency = 830/dia
