1、IEEE Standard for Environmental Assessment of Imaging Equipment Amendment 1 Sponsored by the Standards Activities Board (C/SAB) Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Computer Society IEEE Std 1680.2a-2017 (Amendment to IEEE Std 1680.2-2012) IEEE Std 1680.2a-2017 (Amendment to
2、 IEEE Std 1680.2-2012) IEEE Standard for Environmental Assessment of Imaging Equipment Amendment 1 Sponsor Standards Activities Board (C/SAB) Committee of the IEEE Computer Society 6 December 2017 IEEE-SA Standards Board Abstract: The following three criteria: “RequiredEnd-of-life processing require
3、ments” (currently 4.6.2.1); “OptionalManufacturer recyclers or reuses toner material collected through its cartridge and container take-back program” (currently 4.9.3.2); and “OptionalManufacturer recyclers or reuses plastics collected through its cartridge and container take-back program” (currentl
4、y 4.9.3.3) are revised in this amendment. Keywords: amendment, cartridges, consumables, copiers, digital duplicators, electronic product, end-of-life, environment, environmental leadership, environmental performance, facsimile machines, fax machines, toner, IEEE 1680.2, IEEE 1680.2a, imaging equipme
5、nt, printers, mailing machines, multifunction devices, scanners The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2017 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 22 December 2017. Print
6、ed in the United States of America. IEEE is a registered trademark in the U.S. Patent fitness for a particular purpose; non-infringement; and quality, accuracy, effectiveness, currency, or completeness of material. In addition, IEEE disclaims any and all conditions relating to: results; and workmanl
7、ike effort. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.” Use of an IEEE standard is wholly voluntary. The existence of an IEEE standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the
8、scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. In publishing and making its standards available, IEEE is n
9、ot suggesting or rendering professional or other services for, or on behalf of, any person or entity nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in th
10、e exercise of reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the appropriateness of a given IEEE standard. IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (I
11、NCLUDING, BUT NOT LIMITED TO: PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICAT
12、ION, USE OF, OR RELIANCE UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE. 4 Copyright 2017 IEEE. All rights reserved. Translations The IEEE consensus development process involves the review of documents in English only. In th
13、e event that an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard. Official statements A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board Operations Manual shall not be considered or
14、 inferred to be the official position of IEEE or any of its committees and shall not be considered to be, or be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall make it clear that his or h
15、er views should be considered the personal views of that individual rather than the formal position of IEEE. Comments on standards Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of membership affiliation with IEEE. However, IEEE does not provide c
16、onsulting information or advice pertaining to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is important that any
17、responses to comments and questions also receive the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant response to comments or questions except in those cases where the matter has pre
18、viously been addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to participate in revisions to an IEEE standard is welcome to join the relevant IEEE working group. Comments on standards should be submitted to the following address: Secretary,
19、IEEE-SA Standards Board 445 Hoes Lane Piscataway, NJ 08854 USA Laws and regulations Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements.
20、 Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so Copyright
21、s IEEE draft and approved standards are copyrighted by IEEE under U.S. and international copyright laws. They are made available by IEEE and are adopted for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self-regulati
22、on, standardization, and the promotion of engineering practices and methods. By making these documents available for use and adoption by public authorities and private users, IEEE does not waive any rights in copyright to the documents. 5 Copyright 2017 IEEE. All rights reserved. Photocopies Subject
23、 to payment of the appropriate fee, IEEE will grant users a limited, non-exclusive license to photocopy portions of any individual standard for company or organizational internal use or individual, non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance
24、Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Updating of IEEE Standards documents Users of IEEE Standards do
25、cuments should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document tog
26、ether with any amendments, corrigenda, or errata then in effect. Every IEEE standard is subjected to review at least every ten years. When a document is more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of some value, do
27、not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE standard. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or
28、errata, visit the IEEE Xplore at http:/ieeexplore.ieee.org/ or contact IEEE at the address listed previously. For more information about the IEEE-SA or IEEEs standards development process, visit the IEEE-SA Website at http:/standards.ieee.org. Errata Errata, if any, for all IEEE standards can be acc
29、essed on the IEEE-SA Website at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may require use of subject matter covered by pat
30、ent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is l
31、isted on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with reasonable terms and conditions that are
32、 demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for identifying Essential Patent Claims for which a license may be required, for conduc
33、ting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are express
34、ly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association. 6 Copyright 2017 IEEE. All rights reserved. Participants At the time this dr
35、aft was submitted to the IEEE-SA Standards Board for approval, the IEEE 1680.3a Environmental Assessment of Televisions Working Group had the following membership: Jennifer Costley, Chair Manuel Andrade Christine Banks Pamela Brody-Heine Patricia Dillon Paul Eastman Stephen Greene Randall Groves Joh
36、n Gysbers Masayo Hada Laura Heywood Marcelo Hirschler Eugene Kim Larry King Kelly McAllister Verena Radulovic Brian Riise Tohmei Sai Kaitlyn Schneider Patricia Whiting Jonathan Wood The following members of the individual balloting committee voted on this standard. Balloters may have voted for appro
37、val, disapproval, or abstention. Lennart Ask Charles Barest Brandon Bray Pamela Brody-Heine Ralph Buoniconti Sandra Cannon Keith Chow Christopher Cleet Jennifer Costley Alexandra Degher Victoria DeYoung Patricia Dillon Paul Eastman Holly Elwood Fareed Ferhut Emma Gates Randall Groves Marcelo Hirschl
38、er Werner Hoelzl William Hoffman Kim Holliday Noriyuki Ikeuchi Walter Jager Piotr Karocki Timothy Ringo Lynn Rubinstein Mark Sajbel Mark Schaffer Steve Scherrer Hitesh Sharma Lucian Turk Richard Vernam When the IEEE-SA Standards Board approved this standard on 6 December 2017, it had the following m
39、embership: Jean-Philippe Faure, Chair Gary Hoffman, Vice Chair John Kulick, Past Chair Konstantinos Karachalios, Secretary Chuck Adams Masayuki Ariyoshi Ted Burse Stephen Dukes Doug Edwards J. Travis Griffith Michael Janezic Thomas Koshy Joseph L. Koepfinger* Kevin Lu Daleep Mohla Damir Novosel Rona
40、ld C. Petersen Annette D. Reilly Robby Robson Dorothy Stanley Adrian Stephens Mehmet Ulema Phil Wennblom Howard Wolfman Yu Yuan *Member Emeritus7 Copyright 2017 IEEE. All rights reserved. Introduction This introduction is not part of IEEE Std 1690.2a-2017, IEEE Standard for Environmental Assessment
41、of Imaging EquipmentAmendment 1. This amendment is intended to harmonize one criterion (4.6.2.1) with the approach being taken in other IEEE 1680 standards and to revise one sentence in two optional criteria (4.9.3.2 and 4.9.3.3) to allow for manufacturers to declare the criterion differently in different countries. These criteria as written in IEEE Std 1680.2 appear to be a barrier for uptake of the standard beyond North America.
