EN 13365-2002 en Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling (Incorporates Amendment A1 2.pdf

上传人:ownview251 文档编号:707674 上传时间:2019-01-03 格式:PDF 页数:12 大小:165.32KB
下载 相关 举报
EN 13365-2002 en Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling (Incorporates Amendment A1 2.pdf_第1页
第1页 / 共12页
EN 13365-2002 en Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling (Incorporates Amendment A1 2.pdf_第2页
第2页 / 共12页
EN 13365-2002 en Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling (Incorporates Amendment A1 2.pdf_第3页
第3页 / 共12页
EN 13365-2002 en Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling (Incorporates Amendment A1 2.pdf_第4页
第4页 / 共12页
EN 13365-2002 en Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling (Incorporates Amendment A1 2.pdf_第5页
第5页 / 共12页
点击查看更多>>
资源描述

1、BRITISH STANDARDBS EN 13365:2002Incorporating Amendment No. 1Transportable gas cylinders Cylinder bundles for permanent and liquefied gases (excluding acetylene) Inspection at time of fillingThe European Standard EN 13365:2002, with the incorporation of amendment A1:2005, has the status of a British

2、 StandardICS 23.020.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 13365:2002This British Standard was published under the authority of the

3、 Standards Policy and Strategy Committee on 18 April 2002 BSI 22 December 2005ISBN 0 580 39505 7National forewordThis British Standard is the official English language version of EN 13365:2002, including amendment A1:2005.The start and finish of text introduced or altered by CEN amendment is indicat

4、ed in the text by tags !“. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee PVE/3, Gas containers, to Subcommittee PVE/3/7, Gas cyli

5、nder (receptacle) operations, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found i

6、n the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsib

7、le for its correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK int

8、erests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover.The BSI copyright date displayed in this documen

9、t indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Comments16059 22 December 2005 See national forewordEN 13365 March 2002 + A1 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM September 2005 ICS 23.020.30 English version Transportable gas cylinders - Cyl

10、inder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling (includes amendment A1:2005) Bouteilles gaz transportables - Cadres de bouteilles pour gaz permanents et liqufis (sauf lactylne) - Inspection au moment du remplissage (inclut lamendement A1:2005) Or

11、tsbewegliche Gasflaschen - Flaschenbndel fr permanente und verflssigte Gase (auer Acetylen) - Prfung zum Zeitpunkt des Fllens (enthlt nderung A1:2005) This European Standard was approved by CEN on 30 December 2001. Amendment A1 was approved by CEN on 22 July 2005. CEN members are bound to comply wit

12、h the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre

13、 or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official vers

14、ions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switz

15、erland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No

16、. EN 13365:2002 + A1:2005 EContents page Foreword3 Introduction.4 1 Scope 5 2 Normative references5 3 Terms and definitions .5 4 Inspection at time of filling 6 Bibliography8 2 EN 13365:2002 (E)EN 13365:2002 (E) 3 Foreword This document EN 13365:2002 has been prepared by Technical Committee CEN/TC 2

17、3 “Transportable gas cylinders“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2002, and conflicting national standards shall be withdrawn at t

18、he latest by September 2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembo

19、urg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Foreword to amendment A1 This European Standard (EN 13365:2002/A1:2005) has been prepared by Technical Committee CEN/TC 23 “Transportable gas cylinders”, the secretariat of which is held by BSI. This Europe

20、an Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2006, and conflicting national standards shall be withdrawn at the latest by March 2006. According to the CEN/CENELEC Internal Regulations, the national

21、standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portuga

22、l, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13365:2002 (E) 4 Introduction Transportable gas cylinder bundles require inspection at time of filling, both before and after the filling process, in order to ensure that all components are suitable for the intended filling con

23、ditions and are free of serious defects and contamination that can affect the integrity of the bundle. EN 13365:2002 (E) 5 1 Scope This European Standard specifies the requirements for inspection before, during and after the time of filling for cylinder bundles, also referred to as bundles. This sta

24、ndard does not apply to acetylene bundles which are covered in EN 12755. This standard does not cover bundles when they are a part of a battery vehicle. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative refer

25、ences are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the

26、 latest edition of the publication referred to applies (including amendments). EN 1802, Transportable gas cylinders Periodic inspection and testing of seamless aluminium alloy gas cylinders. EN 1968, Transportable gas cylinders Periodic inspection and testing of seamless steel gas cylinders. prEN 13

27、769, Transportable gas cylinders Cylinder bundles Design, manufacture, identification and testing. prEN ISO 11623, Transportable gas cylinders Periodic inspection and testing of composite gas cylinders (ISO/FDIS 11623:2000). 3 Terms and definitions For the purposes of this European Standard, the fol

28、lowing terms and definitions apply. 3.1 cylinder bundle (bundle) transportable assembly, which is designed for being routinely lifted and which consists of a frame and two or more cylinders each of capacity up to 150 litres connected to a manifold by cylinder valves or fittings such that the cylinde

29、rs are filled, transported and emptied without disassembly 3.2 frame structural and non structural members of a bundle which combine all other components together, whilst providing protection for the bundles cylinders, valves and manifold and which enable the bundle to be transported 3.3 cylinder va

30、lve valve which is fitted into a cylinder and to which a manifold is connected 3.4 cylinder fitting device with no gas shut-off capability which serves as a method for connecting the manifold of a bundle to its individual cylinders when cylinder valves are not fitted to the cylinders 3.5 manifold sy

31、stem for connecting the cylinder valves or cylinder fittings to the main outlet valve(s) or outlet connection(s) of the bundle EN 13365:2002 (E) 63.6 main outlet valve valve which is fitted to the manifold of the bundle isolating it from the outlet connection(s) 3.7 liquefied gas gas which has a cri

32、tical temperature of 20 oC or above 3.8 maximum permissible filling weight the product of the minimum guaranteed water capacity of the cylinders of the cylinder bundle and the filling ratio of the gas contained 4 Inspection at time of filling 4.1 Inspection prior to filling Before filling a bundle i

33、t shall be verified by visual examination that: the bundle is permitted to be filled in the country of the filling station; the bundle has an unexpired periodic inspection date; the bundle is compatible with the nature of the gas and filling pressure or filling weight; the frame is free from damage

34、which may affect its mechanical integrity; the restraining systems that prevent the cylinders from moving are secure and the cylinders have not moved whilst in service; any lifting attachments and/or fork lift slots are free from damage, that may affect the integrity of the bundle; the manifold and

35、pipework are securely attached to the frame and are undamaged; flexible hoses, where fitted, are free fr om damage to any reinforcement braiding; the visible surfaces of the cylinders are free from any signs of dents, cuts, gouges, fire damage or any other signs of damage. Rejection criteria shall b

36、e applied in accordance with EN 1968, EN 1802 or prEN ISO 11623, as appropriate. Where any cylinder is damaged the cylinder bundle shall not be filled but shall be identified and shall be removed from service for corrective action. In the case of fire damage the bundle shall be disassembled and all

37、cylinders shall be inspected and any suspect cylinders shall be revalidated or rejected; the bundle does not show any signs of having been immersed in water or other liquids (e.g. cylinders covered in mud or seaweed) or any signs of tampering (e.g. loosened bolts, missing panels); the cylinder valve

38、s if fitted are all in the open position; the main outlet valve is free from contamination and is undamaged and is the correct thread for the gas to be filled; where appropriate any safety devices such as relief valves or bursting discs are in place and have not been damaged; the necessary data spec

39、ified in prEN 13769 is permanently marked or labelled on the bundle; in the case of liquefied gases the tare weight and maximum permissible filling weight are legible. Additionally a check of the main outlet valve shall be carried out to ensure that the valve operates properly. EN 13365:2002 (E) 7 B

40、efore filling it shall be verified that the bundle is free from any internal contamination which may affect its integrity by ensuring that the bundle has a positive residual pressure and, for liquefied gases, by checking the weight against the tare weight of the bundle. 4.2 Inspection during filling

41、 During filling of the bundle it shall be verified that no apparent leaks exist. Particular attention shall be paid to bundles containing toxic, flammable or pyrophoric gases. within the bundle or the bundle as a whole is overfilled, either all cylinders of a bundle shall be dismantled and only each

42、 cylinder may be individually filled at a time, or each cylinder in a bun dle shall be equipped with a filling control device to ensure that they are not overfilled.“ 4.3 Inspection after filling Upon completion of the filling of the bundle it shall be verified that: ! the bundl e and no single cyli

43、nder with a closable cylinder valve has been overfilled.“ For bundles filled by pressure the pressure shall be corrected against the reference temperature. For bundles filled by weight, the weight of the full bundle shall be checked against the maximum permissible weight by theuse of a scale suitabl

44、e for the weight of the bundle; the cylinder bundle has been correctly labelled; the main outlet valve is not leaking; no apparent leaks exist from the bundle; cylinder valves that need to be closed for transp ort in accordance with transport regulations, have been closed. ! For bundles for liquefie

45、d gases equipped with closable cylinder valves, in order to ensure that no individual cylinder EN 13365:2002 (E) 8 Bibliography EN 12755, Transportable gas cylinders Filling conditions for acetylene bundles. blankBS EN 13365:2002BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionB

46、SI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make

47、sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee respon

48、sible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all B

49、SI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1