1、Recognized as anAmerican National Standard (ANSI)The Institute of Electrical and Electronics Engineers, Inc.3 Park Avenue, New York, NY 10016-5997, USACopyright 2005 by the Institute of Electrical and Electronics Engineers, Inc.All rights reserved. Published 4 April 2001. Printed in the United State
2、s of America.Print: ISBN 0-7381-2633-0 SH94889PDF: ISBN 0-7381-2634-9 SS94889No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.IEEE Std C62.92.1-2000 (R2005)(Revision ofIEEE Std C62.92.1-19
3、87)IEEE Guide for the Applicationof Neutral Grounding in Electrical Utility SystemsPart I: IntroductionSponsorSurge Protective Devices Committeeof theIEEE Power Engineering SocietyReaffirmed 9 June 2005Approved 21 September 2000IEEE-SA Standards BoardAbstract: This guide is the introduction to the C
4、62.92 series of five IEEE guides on neutral grounding inthree-phase electrical utility systems. It provides system grounding definitions and considerations that aregeneral to all types of electrical utility systems.Keywords: class of grounding, coefficient of grounding (COG), earth-fault factor (EFF
5、), earth-return path,effectively grounded, electrical utility systems, grounded solidly, ground-fault current, impedance grounding,means of grounding, neutral grounding, power-system grounding, reactance grounded, system groundingIEEE Standardsdocuments are developed within the IEEE Societies and th
6、e Standards Coordinating Committees of theIEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensusdevelopment process, approved by the American National Standards Institute, which brings together volunteers representingvaried viewpoints and interests
7、to achieve the nal product. Volunteers are not necessarily members of the Institute andserve without compensation. While the IEEE administers the process and establishes rules to promote fairness in theconsensus development process, the IEEE does not independently evaluate, test, or verify the accur
8、acy of any of theinformation contained in its standards.Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability for any personal injury, property or otherdamage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resultingfro
9、m the publication, use of, or reliance upon this, or any other IEEE Standard document.The IEEE does not warrant or represent the accuracy or content of the material contained herein, and expressly disclaimsany express or implied warranty, including any implied warranty of merchantability or tness fo
10、r a specic purpose, or thatthe use of the material contained herein is free from patent infringement. IEEE Standards documents are supplied “AS IS.”The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market,or provide other goods and ser
11、vices related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at thetime a standard is approved and issued is subject to change brought about through developments in the state of the art andcomments received from users of the standard. Every IEEE Standard is subjected to revi
12、ew at least every ve years for revi-sion or reafrmation. When a document is more than ve years old and has not been reafrmed, it is reasonable to concludethat its contents, although still of some value, do not wholly reect the present state of the art. Users are cautioned to checkto determine that t
13、hey have the latest edition of any IEEE Standard.In publishing and making this document available, the IEEE is not suggesting or rendering professional or other servicesfor, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other person orentity to an
14、other. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of acompetent professional in determining the exercise of reasonable care in any given circumstances.Interpretations: Occasionally questions may arise regarding the meaning of portions of standards a
15、s they relate to specicapplications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepareappropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that anyinterpretation has also
16、 received the concurrence of a balance of interests. For this reason, IEEE and the members of itssocieties and Standards Coordinating Committees are not able to provide an instant response to interpretation requestsexcept in those cases where the matter has previously received formal consideration.
17、Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership afliation withIEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriatesupporting comments. Comments on standards and requests for in
18、terpretations should be addressed to:Secretary, IEEE-SA Standards Board445 Hoes LaneP.O. Box 1331Piscataway, NJ 08855-1331USAIEEE is the sole entity that may authorize the use of certication marks, trademarks, or other designations to indicatecompliance with the materials set forth herein.Authorizat
19、ion to photocopy portions of any individual standard for internal or personal use is granted by the Institute ofElectrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. Toarrange for payment of licensing fee, please contact Copyright Cleara
20、nce Center, Customer Service, 222 Rosewood Drive,Danvers, MA 01923 USA; (978) 750-8400. Permission to photocopy portions of any individual standard for educationalclassroom use can also be obtained through the Copyright Clearance Center.Note: Attention is called to the possibility that implementatio
21、n of this standard may require use of subject mat-ter covered by patent rights. By publication of this standard, no position is taken with respect to the existence orvalidity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying patentsfor which a license ma
22、y be required by an IEEE standard or for conducting inquiries into the legal validity orscope of those patents that are brought to its attention.Copyright 2001 IEEE. All rights reserved.iiiIntroduction(This introduction is not a part of IEEE Std C62.92.1-2000, IEEE Guide for the Application of Neutr
23、al Grounding inElectrical Utility SystemsPart I: Introduction.)This guide is the introduction to the IEEE C62.92 series of ve guides on neutral grounding in electricalutility systems. In this series of guides, individual considerations and practices are given to the grounding ofsynchronous generator
24、 systems, generator-station auxiliary systems, distribution systems, and transmissionand subtransmission systems.In the entire IEEE C62.92 series, emphasis is on power-system grounding practices as contrasted with thegrounding, e.g., of industrial systems, which are covered in other guides and stand
25、ards. Those guides andstandards should be referenced, when appropriate, to gain a full picture of other grounding practices.Besides updating the format of the guide, this revision expands the bibliography, adds a new annex to clarifythe effects of grounding resistances and grounded conductors, and a
26、ttempts to clarify areas that elicitedquestions or comments in IEEE Std C62.92-1987.It is impossible to give recognition to all those who have contributed to the technology and practices ofgrounding of power systems. However, the assistance of members, past and present, of the NeutralGrounding Devic
27、es Working Group of the Surge Protective Devices Committee, and other similar groupswith comparable purposes, is gratefully acknowledged.The American National Standards Committee C62, Surge Arrestors, had the following members at the time this guide was approved:J. L. Koepnger,ChairJ. A. Gauthier,NE
28、MA Co-SecretaryN. Ahmad,IEEE Co-SecretaryAt the time this guide was completed, the IEEE Neutral Grounding Devices Working Group had thefollowing members:Douglas C. Dawson,ChairL. BockJ. J. BurkeE. CameronJ. S. CaseC. ChrysanthouT. ComptonW. EtterA. HaaP. JefftriesR. A. JonesW. H. KappG. E. LeeD. W.
29、LenkW. A. MaguireF. D. MartzloffG. N. MillerP. NortarianR. OdenbergJ. OsterhoutT. J. RozekK. B. StumpE. TaylorS. G. WhisenantJ. J. WoodworthT. A. WolfeC. L. BallentineA. BengeJ. J. BurkeD. W. JacksonE. KnappJ. L. KoepngerG. E. LeeS. MazumdarE. R. Taylor, Jr.S. G. WhisenantivCopyright 2001 IEEE. All
30、rights reserved.The following members of the balloting committee voted on this guide:When the IEEE-SA Standards Board approved this standard on 21 September 2000, it had the followingmembership:Donald N. Heirman,ChairJames T. Carlo,Vice ChairJudith Gorman,Secretary*Member EmeritusAlso included is th
31、e following nonvoting IEEE-SA Standards Board liaison:Alan Cookson, NIST RepresentativeDonald R. Volzka, TAB RepresentativeDon MessinaIEEE Standards Project EditorIEEE Green Book is a registered trademark of the Institute of Electrical and Electronics Engineers, Inc.National Electrical Safety Code a
32、nd NESC are both registered trademarks and service marks of the Institute of Electrical andElectronics Engineers, Inc.C. L. BallentineJ. S. BonnesenJ. J. BurkeJ. S. CaseS. R. ChanoJ. F. ChristensenB. R. ColeD. C. DawsonE. P. DickM. FortinJ. FunkeE. GalloG. S. HaralampuJ. HarrisonS. P. HensleyA. R. H
33、ilemanD. W. JacksonB. JohnnerfeltJ. L. KoepngerB. LeuenbergerW. A. MaguireN. P. McQuinJ. H. NelsonR. OdenbergJ. C. OsterhoutC. O. PeixotoP. E. PoolR. V. RebbapragadaA. W. RebeckT. J. RozekE. J. TarasiewiczE. R. Taylor, Jr.A. VitolsR. WallingS. G. WhisenantJ. S. WilliamsJ. Wilson, Jr.J. J. WoodworthD
34、 M. WordenSatish K. AggarwalMark D. BowmanGary R. EngmannHarold E. EpsteinH. Landis FloydJay Forster*Howard M. FrazierRuben D. GarzonJames H. GurneyRichard J. HollemanLowell G. JohnsonRobert J. KennellyJoseph L. Koepnger*Peter H. LipsL. Bruce McClungDaleep C. MohlaJames W. MooreRobert F. MunznerRon
35、ald C. PetersenGerald H. PetersonJohn B. PoseyGary S. RobinsonAkio TojoDonald W. ZipseCopyright 2001 IEEE. All rights reserved.vContents1. Overview 11.1 Scope 11.2 Purpose. 12. References 13. Definitions 24. Basic considerations. 24.1 Goals of system grounding 24.2 System neutral grounding vs. appar
36、atus neutral grounding. 35. Means of grounding . 35.1 Solidly grounded 35.2 Inductance grounded 35.3 Resistance grounded 45.4 Resonant grounded. 45.5 Capacitance grounded 45.6 Ungrounded (isolated neutral) . 55.7 Neutral grounding equipment 56. Classes of grounding 56.1 Grounded system . 56.2 Quanti
37、tative determination of classes of grounding 56.3 Coefficient of grounding 56.4 Earth-fault factor (EFF) . 67. Characteristics of the classes of grounding 77.1 Effectively grounded 77.2 Noneffectively grounded . 87.3 Resistance grounded 87.4 Inductance grounded 87.5 Resonant grounded. 107.6 Unground
38、ed systems 108. Annexes and bibliography 11Annex A (informative) Calculation of coefficients of grounding. 12Annex B (informative) Identity of ground and neutral conductors. 20Annex C (informative) Bibliography 24Copyright 2001 IEEE. All rights reserved.1IEEE Guide for the Applicationof Neutral Grou
39、nding in Electrical Utility SystemsPart I: Introduction1. Overview1.1 ScopeThis guide is intended for application to three-phase electrical utility systems. This is Part I of the ve-partIEEE C62.92 series. This part provides denitions and considerations that are general to all types ofelectrical uti
40、lity systems. The remaining four parts provide specic guidance on synchronous generatorsystems (IEEE Std C62.92.2-1989), generating station auxiliary systems (IEEE Std C62.92.3-1993),distribution systems (IEEE Std C62.92.4-1991), and transmission and subtransmission systems (IEEE StdC62.92.5-1992).1
41、2 PurposeThis guide presents basic considerations for the selection of neutral grounding parameters that will providefor the control of overvoltage and ground-fault current on all parts of three-phase electrical utility systems.2. ReferencesThis guide shall be used in conjunction with the following
42、 publications. When the following publications aresuperseded by an approved revision, the revision shall apply.IEEE Std 80-2000, IEEE Guide for Safety in AC Substation Grounding.1IEEE Std 142-1991, IEEE Recommended Practice for Grounding of Industrial and Commercial PowerSystems (IEEE Green Book).1I
43、EEE publications are available from the Institute of Electrical and Electronics Engineers, Inc., 445 Hoes Lane, P.O. Box 1331, Piscat-away, NJ 08855-1331, USA (http:/standards.ieee.org/).IEEE Std C62.92.1-2000 IEEE GUIDE FOR THE APPLICATION OF NEUTRAL GROUNDING2Copyright 2001 IEEE. All rights reserv
44、ed.ASC C2-1997, Accredited Standards Committee, National Electrical Safety Code(NESC).2IEEE Std C62.92.2-1989 (Reaff 2000), IEEE Guide for the Application of Neutral Grounding in ElectricalUtility SystemsPart II: Grounding of Synchronous Generator Systems.IEEE Std C62.92.3-1993 (Reaff 2000), IEEE Gu
45、ide for the Application of Neutral Grounding in ElectricalUtility SystemsPart III: Generator Auxiliary Systems.IEEE Std C62.92.4-1991 (Reaff 1996), IEEE Guide for the Application of Neutral Grounding in ElectricalUtility SystemsPart IV: Distribution Systems.IEEE Std C62.92.5-1992 (Reaff 1997), IEEE
46、Guide for the Application of Neutral Grounding in ElectricalUtility SystemsPart V: Transmission Systems and Subtransmission Systems.3. DenitionsFor the purpose of this guide the following terms and denitions apply. Terms other than those dened herehave standard denitions as listed in The Authoritati
47、ve Dictionary of IEEE Standards Terms, Seventh EditionB10.33.1 class of grounding: A specic range or degree of grounding; e.g., effectively and noneffectively.3.2 means of grounding:The physical devices by which various degrees of grounding are achieved; e.g.,inductance grounding, resistance groundi
48、ng, or resonant grounding.4. Basic considerationsThere is no one simple answer to the problem of grounding. Each of a number of possible solutions to agrounding problem has at least one feature that is outstanding, but which is obtained at some sacrice ofother features that may be equally worthy. Th
49、us, the selection of the class and means of grounding is often acompromise between somewhat conicting solutions (see IEEE Tutorial Course B17).4.1 Goals of system groundingThe basic goals in selecting a grounding scheme for any given system are as follows:a) Voltage ratings and degree of surge-voltage protection available from surge arrestersb) Limitation of transient line-to-ground overvoltages (see Generator Grounding Guide B2, and IEEETutorial Course B17)c) Sensitivity and selectivity of the ground-fault relayingd) Limitation of the
