1、 ISO 2013 Road construction and road maintenance machinery and equipment Basic types Identification and description AMENDMENT 1 Machines et matriels pour la construction et lentretien des routes Principaux types Dnomination et description AMENDEMENT 1 INTERNATIONAL STANDARD ISO 22242 First edition 2
2、005-09-15 Reference number ISO 22242:2005/Amd.1:2013(E) AMENDMENT 1 2013-01-15 ISO 22242:2005/Amd.1:2013(E)ii ISO 2013 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2013 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or b
3、y any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-m
4、ail copyrightiso.org Web www.iso.org Published in Switzerland ISO 22242:2005/Amd.1:2013(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried o
5、ut through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO c
6、ollaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International
7、 Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elemen
8、ts of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Amendment 1 to ISO 22242:2005 was prepared by Technical Committee ISO/TC 195, Building construction machinery and equipment. ISO 2013 All rights reserved iii Road
9、 construction and road maintenance machinery and equipment Basic types Identification and description AMENDMENT 1 Page 5, Introduction Remove “vibratory plates, rammers” from the Example of the second list item and insert it, immediately after “core drilling units”, in the Example of the third list
10、item. Page 19, term 2.10.2 Replace the corresponding text in the “Identification/Description” column by self-propelled machine intended for heating and plastifying of asphalt pavement so that a remixer (see 2.10.3) can be operated Replace the drawing in Figure 57 by Page 20, term 2.10.3 Change the t
11、erm and figure title from “Hot in-place recycling machine” to “Hot recycler/Remixer” and replace the drawing in Figure 58 byISO 22242:2005/Amd.1:2013(E) ISO 2013 All rights reserved 1 ISO 22242:2005/Amd.1:2013(E) Replace the corresponding text in the “Identification/Description” column by self-prope
12、lled machine used for large-scale rehabilitation of bituminous bound road pavements with the use of reclaimed asphalt pavement (RAP) and new binder NOTE The machine consists of a heating unit, storage for new binder, a milling unit, a mixing unit for mixing RAP and new binder, a conveyor and distribution. Page 20, term 2.10.4 In the text in the “Identification/Description” column, correct “window” to “windrow”.2 ISO 2013 All rights reserved ISO 22242:2005/Amd.1:2013(E) ISO 2013 All rights reserved ICS 93.080.10 Price based on 2 pages
