SN 214 257 1-1979 TextilesTests for colour fastnessSection N03 Colour fastness to bleaching Sodium chlorite Mild《固定联轴器 型号 R(摩擦阻力)带有短套筒,适用于圆柱形轴端(用来收缩)1)2)螺栓圆周直径的.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ISO 8566-1-2010 Cranes - Cabins and control stations - Part 1 General《起重机 司机室和控制站 第1部分 总则》.pdf

ISO 8566-3-2010 Cranes - Cabins and control stations - Part 3 Tower cranes《起重机 司机室和控制站 第3部分 塔式起重机》.pdf

ISO 8566-5-2017 Cranes - Cabins and control stations - Part 5 Overhead travelling and portal bridge cranes《起重机 司机室控制站 第5部分 桥式和门式起重机》.pdf

ISO 8567 CORR 1-2004 Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions Technical.pdf

ISO 8567-2002 Cinematography - Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints - Position and dimensions《电影摄影 在35mm和16mm电.pdf

ISO 8568-2007 Mechanical shock - Testing machines - Characteristics and performance《机械冲击 测试机 特征和性能》.pdf

ISO 857-2-2005 Welding and allied processes - Vocabulary - Part 2 Soldering and brazing processes and related terms《焊接和相关工艺 词汇 第2部分 软钎焊和铜焊工艺及相关术语》.pdf

ISO 8570-1991 Plastics film and sheeting determination of cold-crack temperature《塑料 薄膜和薄板 冻裂温度测定》.pdf

ISO 8571-1-1988 Information processing systems Open Systems Interconnection file transfer access and management Part 1 General introduction《信息处理系统 开放系统互连 文卷传送、访.pdf